Grain refinement and stability in rare-earth magnesium alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Controlling the plastic anisotropy of magnesium alloy by tailoring the grain size and yttrium content10.3390/cryst13010115 ↗
2. Revealing the grain size dependent hot workability and deformation mechanisms in a Mg-Zn-Y alloy10.1016/j.jma.2021.08.001 ↗
3. Effect of grain size on the microstructure and deformation mechanism of Mg-2Y-0.6 Nd-0.6 Zr alloy at a high strain rate10.1016/j.msea.2021.141774 ↗
4. The mechanisms of grain growth of Mg alloys: a review10.1016/j.jma.2022.09.001 ↗
5. Effects and mechanisms of rare earth and calcium on the flame retardancy of magnesium alloys10.1016/j.jmrt.2024.06.009 ↗
6. Rare Earth elements in heat-resistant magnesium alloys: mechanisms, performance, and design strategies10.3390/ma18174090 ↗
7. Grain size effect on tensile properties and slip systems of pure magnesium10.1016/j.actamat.2020.116604 ↗
8. Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation10.1016/j.scriptamat.2021.114414 ↗
9. Effect of gadolinium on the deformation and recrystallization behavior of magnesium crystals10.1016/j.actamat.2022.118312 ↗
10. Grain initiation and grain refinement: an overview10.3390/met12101728 ↗
11. Stochastic model and kinetic Monte Carlo simulation of solute interactions with stationary and moving grain boundaries. II. Application to two-dimensional systems
12. Effect of calcium on the rate of grain boundary migration in pure magnesium during annealing10.1007/s12540-023-01612-6 ↗
13. The electronic origins of the “rare earth” texture effect in magnesium alloys10.1038/s41598-021-93703-w ↗
14. Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy10.1016/j.jmrt.2021.08.013 ↗
15. A review of SLMed magnesium alloys: processing, properties, alloying elements and postprocessing10.3390/met10081073 ↗
16. Atomistic insights into the inhomogeneous nature of solute segregation to grain boundaries in magnesium10.1016/j.scriptamat.2023.115432 ↗
17. Control of twin boundary mobility by solute segregation in Mg binary alloys10.1016/j.scriptamat.2024.116173 ↗
18. Microstructure evolution of extruded Mg-RE-Ag alloy during short-time heat treatment10.1016/j.jre.2024.07.025 ↗
19. Synergistic effects of grain refinement and texture weakening on mechanical properties anisotropy of Mg-9Gd-4Y-2Zn-0.4 Zr alloy via RUE processing10.1016/j.jmrt.2022.05.045 ↗
20. Unveiling precipitation behavior in Mg-Y based alloys10.1016/j.matdes.2021.109570 ↗
21. Mechanical properties and microstructure evolution of Mg-Gd alloy during aging treatment10.3390/met12010039 ↗
22. Thermal stability of nanostructured Mg-Gd-Y-Zr alloy processed by rotary swaging10.1016/j.jallcom.2025.185158 ↗
23. A near-isotropic ultrafine-grained Mg-Gd-Ag alloy with high strength-ductility synergy10.1016/j.jmrt.2020.09.115 ↗
24. Tailoring the strength and formability of Mg alloys through rare earth element additions (Gd and Dy) and dynamic recrystallizations
25. Room temperature deformation-induced solute segregation and its impact on twin boundary mobility in a Mg-Y alloy10.1016/j.scriptamat.2021.114375 ↗
26. Grain boundary co-segregation in magnesium alloys with multiple substitutional elements10.1016/j.actamat.2021.116749 ↗
27. On the role of yttrium in microstructure evolution and texture modification during magnesium alloy extrusion10.1016/j.matchar.2020.110189 ↗
28. Synergistic effects of solutes on active deformation modes, grain boundary segregation and texture evolution in Mg-Gd-Zn alloys10.1016/j.msea.2022.143348 ↗
29. Enhanced microstructure homogeneity of rare earth magnesium alloy under electropulsing10.1016/j.matdes.2024.112668 ↗
30. Solute co-segregation mechanisms at low-angle grain boundaries in magnesium: a combined atomic-scale experimental and modeling study10.1016/j.actamat.2026.121947 ↗
31. Effect of grain refinement on tensile ductility in ZK60 magnesium alloy under dynamic loading10.2320/matertrans.42.1177 ↗
32. Fabrication of high-density twins and precipitates in a rare-earth magnesium alloy with superior work hardening and ultimate strength10.1016/j.jma.2025.10.006 ↗
33. Effects of heat treatment on mechanical properties of an extruded Mg-4.3 Gd-3.2 Y-1.2 Zn-0.5 Zr alloy and establishment of its Hall–Petch relation10.1016/j.jma.2020.09.023 ↗
34. Dynamic recrystallisation (DRX) map of magnesium alloy for texture control with hot processing10.1177/02670836241245809 ↗
35. Effects of dynamic recrystallization mechanisms on texture evolution in Mg-Gd-Y-Zr-Ag alloy during hot compression
36. Effect of grain boundary segregation on microstructure and mechanical properties of ultra-fine grained Mg-Al-Ca-Mn alloy wires10.1016/j.msea.2022.143423 ↗
37. Realizing the purification and grain refinement of Mg-Gd-Y alloy by one-step flux refining10.1016/j.jmst.2023.05.080 ↗
38. Mechanical properties and microstructural evolutions during hot deformation of Co–Cr–Fe alloy10.1007/s42243-024-01435-8 ↗
39. Low-temperature embrittlement in Fe–Cr–X (X= Ni, Al, Co, etc.) alloys governed by thermodynamics, kinetics and mechanics: a review10.1007/s42243-025-01528-y ↗
40. Grain refinement and improved mechanical properties of as-cast Mg-3Gd alloy by Zr addition10.1016/j.jmrt.2025.01.213 ↗
41. Grain refinement of magnesium alloys: a review of recent research, theoretical developments, and their application10.1007/s11661-012-1513-x ↗
42. Regulating microstructure and improving precipitation hardening response of fine-grained Mg-RE-Ag hot-extruded alloy by extreme short-time heat treatment10.1016/j.msea.2023.146059 ↗
43. Role of grain boundary segregation on microstructural development in basal-textured Mg-Al-Zn alloy sheet10.1016/j.scriptamat.2022.114828 ↗
44. Anisotropic segregation-driven texture weakening in a dilute Mg-Al-Ca alloy during isothermal annealing10.1080/21663831.2023.2237996 ↗
45. Twinning aspects and their efficient roles in wrought Mg alloys: a comprehensive review10.1016/j.jma.2024.04.035 ↗
46. Microstructure and mechanical properties of repair welds of low-pressure sand-cast Mg–Y–RE–Zr alloy by tungsten inert gas welding10.1016/j.jma.2020.07.009 ↗
47. Thermomechanical processing during warm deformation in a medium C microalloyed steel for developing spheroidised and ultrafine grained microstructures10.1007/s42243-025-01573-7 ↗
48. Refinement of cast microstructure of A517 steel by addition of TiB210.1007/s42243-024-01248-9 ↗
49. Grain refinement and exceptional creep resistance achieved in an as-cast Mg–Y alloy with Al addition10.1016/j.msea.2024.146587 ↗
50. Enhanced grain boundary cohesion mediated by solute segregation in a dilute Mg alloy with improved crack tolerance and strength10.1016/j.ijplas.2024.103950 ↗
51. Achieving ultra-high strength and ductility in a rare-earth-free magnesium alloy via precisely controlled secondary hot extrusion process with an extremely low extrusion speed10.1016/j.jma.2024.07.015 ↗
52. The synergistic and interactive effects of slip systems and dynamic recrystallization on the weakening basal texture of Mg-Y-Nd-Zr-Gd magnesium alloy10.1016/j.matdes.2023.112583 ↗
53. Grain refinement of magnesium alloys by in-situ formed Al2RE particles: a comprehensive review10.1016/j.jmrt.2025.06.105 ↗
54. Non-basal dislocation nucleation site of solid solution magnesium alloy10.2320/matertrans.MT-M2020040 ↗
55. Achieving high strength in Mg-0.7 Sm-0.3 Zr alloy via room-temperature rotary swaging: radial gradient microstructure and grain refinement mechanisms10.3390/ma18133199 ↗
56. An overview of the effect of grain size on mechanical properties of magnesium and its alloys10.2320/matertrans.MT-MF2022005 ↗
57. Effect of grain size on tensile behavior and the underlying deformation modes in a Mg-5Y sheet10.1016/j.jallcom.2024.176570 ↗
58. Effect of Zn content on the microstructural stability and grain growth kinetics of fine-grained extruded Mg–Gd–Zn alloys10.1016/j.jallcom.2020.154766 ↗
59. Dense precipitation clusters and particle-stimulated nucleation-mediated dynamic recrystallization enabling improved strength-ductility synergy in a micro-alloyed Mg-1Zn-0.6 Zr alloy10.1016/j.matdes.2025.114346 ↗
60. Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension10.1016/j.jma.2024.03.019 ↗
61. Current research progress in grain refinement of cast magnesium alloys: a review article10.1016/j.jallcom.2014.09.061 ↗
62. Significantly enhanced grain boundary Zn and Ca co-segregation of dilute Mg alloy via trace Sm addition10.1016/j.msea.2021.142259 ↗
63. Recent advances on grain refinement of magnesium rare-earth alloys during the whole casting processes: a review10.1016/j.jma.2023.09.029 ↗
64. High temperature creep behavior and creep microstructure evolution of T6 state Mg–15Gd alloy10.1016/j.msea.2020.139138 ↗
65. Super-ductile magnesium alloy at room temperature10.1016/j.actamat.2025.121884 ↗
66. Hot-deformation kinetics analysis and extrusion parameter optimization of a dilute rare-earth free magnesium alloy10.1016/j.jma.2022.07.013 ↗
67. The deformation behavior of Mg-2Zn-0.1Ca alloy sheet: the role of strain rate10.1016/j.actamat.2024.120633 ↗
68. The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys10.1016/j.jallcom.2018.11.229 ↗
69. Research advances of magnesium and magnesium alloys worldwide in 202210.1016/j.jma.2023.07.011 ↗
70. Application of high-temperature confocal scanning laser microscopy to investigate non-metallic inclusions in steel: a review10.1007/s42243-024-01413-0 ↗
71. Theory of crystal growth and interface motion in crystalline materials10.1016/0001-6160(60)90110-3 ↗
72. Twinning-assisted static recrystallization and texture evolution in a Mg-Gd-Y-Zr alloy10.1016/j.jmrt.2024.01.007 ↗
73. On the role of selective nucleation and growth to recrystallization texture development in a Mg–Gd–Zn alloy10.1007/s10853-023-09243-3 ↗
74. Revealing precipitation behavior and mechanical response of wire-arc directed energy deposited Mg-Gd-Y-Zr alloy by tailoring aging procedures10.1088/2631-7990/ad35fd ↗
75. Effect of grain boundary segregation of rare earth element on deformation behavior of Mg alloys10.1063/5.0219468 ↗
76. Research progress on texture regulation of rare-earth magnesium alloys10.3390/solids6010011 ↗
77. Strength–ductility synergy in Mg-Gd-Y-Zr alloys via texture engineering in bi-directional forging10.1016/j.jma.2023.12.013 ↗
78. Current progress on solute segregation at interfaces in Mg alloys10.1080/21663831.2026.2619451 ↗
79. Recent developments and applications on high-performance cast magnesium rare-earth alloys10.1016/j.jma.2020.06.021 ↗
80. Effect of competitive precipitation and texture weakening on mechanical properties in a Mg-Gd-Y-Nd-Zr alloy processed by integrated multi-directional forging and extrusion10.3390/met16020234 ↗
81. Utilizing atomic-scale grain boundary segregation: a new way for constructing the lamellar heterogeneous magnesium alloy10.1080/21663831.2025.2544775 ↗
82. First–principles study of β′ phase in Mg–RE alloys10.1016/j.ijmecsci.2022.108045 ↗
83. Hot compression behavior and microstructure evolution of Mg-13Gd-4Y-2Zn-0.5 Zr alloy10.1016/j.jallcom.2026.186923 ↗
84. Nucleation of recrystallization in magnesium alloy grains of varied orientation and the impacts on texture evolution10.1016/j.jma.2022.09.006 ↗
85. Rare-earth containing magnesium alloys: a review of precipitation behavior and its impact on fatigue performance10.1016/j.jma.2025.05.010 ↗
86. Normal and abnormal grain growth in magnesium: experimental observations and simulations10.1016/j.jmst.2020.01.014 ↗
87. Composition optimization of high-strength Mg-Gd-Y-Zr alloys based on the structural unit of Mg-Gd solid solution10.1016/j.jmst.2020.08.041 ↗
88. Microstructure and high temperature mechanical properties of the Mg-Gd-Y (-Nd)-Zr alloy10.1016/j.jmrt.2023.03.065 ↗
89. Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jmrt.2024.03.112 ↗
90. Microstructure and mechanical properties of a dilute Mg-Gd-Y-Zr alloy fabricated using wire-arc directed energy deposition additive manufacturing10.1016/j.jmrt.2024.02.172 ↗
91. Grain boundary plasticity in Mg binary alloys by segregation of p-block element10.1016/j.msea.2023.146066 ↗
92. Dynamic recrystallization mechanism, texture evolution development and mechanical characteristics of a Mg–8.7 Gd–4.18 Y–0.42 Zr magnesium alloy by ECAP10.1016/j.pnsc.2024.04.002 ↗
93. Tuning the microstructure and strength of Mg–RE alloys through the rare-earth elements10.1007/s10853-025-10724-w ↗
94. Enhancing strength and ductility of low RE content Mg-Gd-Y-Zr alloy via a novel thermomechanical treatment based on multi-directional forging10.1016/j.jallcom.2023.170535 ↗
95. Deformation mechanisms of magnesium alloys with rare-earth and zinc additions under plane strain compression10.3390/ma17010033 ↗
96. Research advances of magnesium and magnesium alloys worldwide in 202110.1016/j.jma.2022.04.001 ↗
97. Uncovering the role of dynamic recrystallization in< 0001> texture formation during hot extrusion in Mg-Gd-Y-Zn alloy10.1016/j.jallcom.2025.180482 ↗
98. Mechanism of precipitation distribution in WE43 alloy10.1016/j.matchar.2023.112660 ↗
99. The high-temperature deformation and microstructural evolution mechanism of Mg-Gd-Y-Zn-Zr alloy formed by CMT arc additive forming10.1080/17452759.2023.2279152 ↗
100. Enhanced mechanical properties of Mg–Zn–Y–Zr alloy by low-speed indirect extrusion10.1016/j.jmrt.2020.06.029 ↗