Effects of Ni and Al on microstructural evolution and mechanical properties in secondary hardening steels
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (44)
Show source-provided references
1. Clustering, nano-scale precipitation and strengthening of steels10.1016/j.pmatsci.2020.100764 ↗
2. Progress on improving strength-toughness of ultra-high strength martensitic steels for aerospace applications: a review10.1016/j.jmrt.2022.12.177 ↗
3. Thermodynamics aided design of high Co-Ni secondary hardening steels10.1016/0364-5916(90)90039-3 ↗
4. Strength and toughness of Fe-10Ni alloys containing C, Cr, Mo, and Co10.1007/BF02649630 ↗
5. Coherent precipitation of M2C carbides in AF1410 steel10.1016/0921-5093(89)90103-2 ↗
6. Transmission electron microscopy examination of hardening and toughening phenomena in Aermet 10010.1007/BF02666329 ↗
7. Secondary hardening behavior in ausformed martensitic alloys with different Co content10.1016/j.physb.2017.11.083 ↗
8. Controlling the MC and M2C carbide precipitation in Ferrium® M54® steel to achieve optimum ultimate tensile strength/fracture toughness balance10.1016/j.matchar.2018.03.041 ↗
9. Aging response of a Fe-C-Co-Ni secondary hardening steel: the significance of matrix ordering10.1016/j.msea.2023.145923 ↗
10. 2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness10.1016/j.jmst.2020.06.014 ↗
11. A novel low cost 2000 MPa grade ultra-high strength steel with balanced strength and toughness10.1016/j.msea.2019.05.039 ↗
12. Cementite-free martensitic steels: a new route to develop high strength/high toughness grades by modifying the conventional precipitation sequence during tempering10.1016/j.actamat.2012.07.030 ↗
13. Evolution of microstructures and mechanical properties with tempering temperature in a novel synergistic precipitation strengthening ultra-high strength steel
14. Effect of ageing temperature on the microstructural evolution and mechanical properties in M2C and NiAl co-precipitation secondary hardening ultrahigh-strength steel10.1016/j.jmrt.2024.04.116 ↗
15. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
16. Strain hardening mediated by coherent nanoprecipitates in ultrahigh-strength steels10.1016/j.actamat.2021.116984 ↗
17. Industrially produced 2.4 GPa ultra-strong steel via nanoscale dual-precipitates co-configuration10.1016/j.matchar.2024.113646 ↗
18. Developing high strength/high toughness grades steels by dual-precipitates co-configuration during aging process10.1016/j.matchar.2024.113623 ↗
19. The co-precipitation evolution of NiAl and Cu nanoparticles and its influence on strengthening and toughening mechanisms in low-carbon ultra-high strength martensite seamless tube steel10.1016/j.ijplas.2023.103654 ↗
20. Impact toughness and fracture propagation mechanism of NiAl precipitation-strengthened HSLA steels10.1016/j.matdes.2024.112927 ↗
21. A rapid X-ray method for the determination of retained austenite
22. The modified Williamson-Hall plot and dislocation density evaluation from diffraction peaks10.1016/j.scriptamat.2022.114768 ↗
23. Quantitative metallography of dispersion-strengthened alloys from extraction replicas-volume fraction and interparticle spacing
24. Secondary hardening and fracture behavior in alloy steels containing Mo, W, and Cr10.1007/s11661-997-1005-6 ↗
25. Microstructure analysis and yield strength simulation in high Co-Ni secondary hardening steel10.1016/j.msea.2016.05.069 ↗
26. Formation and growth kinetics of reverted austenite during tempering of a high Co-Ni steel10.1007/s11661-016-3760-8 ↗
27. Effects of lath boundary segregation and reversed austenite on toughness of a high-strength low-carbon steel10.1007/s11661-024-07331-w ↗
28. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
29. M2C precipitates in isothermal tempering of high Co-Ni secondary hardening steel10.1007/BF02595438 ↗
30. Early stages of cementite precipitation during tempering of 1C–1Cr martensitic steel10.1007/s10853-019-03530-8 ↗
31. Carbon segregation and cementite precipitation at grain boundaries in quenched and tempered lath martensite10.1016/j.msea.2022.144369 ↗
32. Cementite precipitation in conventionally and rapidly tempered 4340 steel
33. Influence of cooling rate during cryogenic treatment on the hierarchical microstructure and mechanical properties of M54 secondary hardening steel10.1016/j.msea.2022.143659 ↗
34. Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel10.1016/j.actamat.2019.08.042 ↗
35. An analytical electron microscopy study of paraequilibrium cementite precipitation in ultra-high-strength steel10.1007/s11661-999-0042-8 ↗
36. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
37. Revealing the evolution behavior of multiple carbides precipitation and mechanical response in M54 secondary hardening steel10.1016/j.matchar.2024.113856 ↗
38. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
39. Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning10.1016/j.actamat.2020.116561 ↗
40. Precipitation hardening in metals10.1179/026708399773002782 ↗
41. Synergistic alloying effects on nanoscale precipitation and mechanical properties of ultrahigh-strength steels strengthened by Ni3Ti, Mo-enriched, and Cr-rich co-precipitates10.1016/j.actamat.2021.116788 ↗
42. Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering10.1016/j.msea.2016.12.019 ↗
43. Synergy of strengthening and toughening of a Cu-rich precipitate-strengthened steel10.1016/j.msea.2021.142487 ↗
44. Refinement of Cu-M2C precipitates and improvement of strength and toughness by Ti microalloying in a Cu-bearing steel10.1016/j.msea.2020.140678 ↗