Study on the influence of crack propagation mechanisms in cutting SiCp/Al composites on surface integrity
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Surface roughness prediction model of SiCp/Al composite in grinding10.1016/j.ijmecsci.2019.02.025 ↗
2. Experimental study of surface integrity during end milling of Al/SiC particulate metal–matrix composites10.1016/j.jmatprotec.2007.11.280 ↗
3. Abrasive machining of advanced aerospace alloys and composites10.1016/j.cirp.2015.05.004 ↗
4. Recent developments towards commercialization of metal matrix composites10.3390/ma13122828 ↗
5. Machining of Al/SiC particulate metal-matrix composites: Part I: Tool performance10.1016/S0924-0136(98)00054-5 ↗
6. A comparison between conventional abrasives and superabrasives in grinding of SiC-aluminium composites10.1016/S0890-6955(99)00061-9 ↗
7. Microstructure and properties of Al/Si/SiC composites for electronic packaging10.1016/S1003-6326(11)61374-5 ↗
8. Metal matrix composite brake rotor: historical development and product life cycle analysis10.15282/ijame.4.2011.8.0038 ↗
9. Design of high volume fraction SiC/Al composite mirror in space remote sensor10.3788/co.20150801.0099 ↗
10. Experimental and simulation study of ultrasonic elliptical vibration cutting SiCp/Al composites: chip formation and surface integrity study10.1016/j.jmrt.2022.12.008 ↗
11. Characterization of material removal in ultrasonically assisted grinding of SiCp/Al with high volume fraction10.1007/s00170-017-0676-4 ↗
12. Investigation on the removal characteristics of single-point cutting high-volume fraction SiCp/Al composites10.1007/s00170-021-07977-5 ↗
13. Tensile and fatigue properties of the AA6061/20 vol% Al2O3p and AA7005/10 vol% Al2O3p composites10.1016/j.compscitech.2005.04.044 ↗
14. Review of ultrasonic vibration-assisted machining in advanced materials10.1016/j.ijmachtools.2020.103594 ↗
15. On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining10.1016/j.jmatprotec.2020.116875 ↗
16. Development and characterization of hybrid aluminium matrix composites through stir-squeeze casting using distinct reinforcements for structural applications10.1007/s00170-024-14102-9 ↗
17. Sustainability-oriented machining of additively manufactured SS316L: Impact of laser powder bed fusing process parameters under MQL milling10.1016/j.jmapro.2026.05.008 ↗
18. Performance evaluation of PVD-coated twist drills in deep hole drilling of AISI 1045 steel: influence of cutting speed and drill point geometry10.1007/s00170-026-18319-8 ↗
19. Evaluating tool wear mechanisms, hole integrity and drilling performance of indexable and solid carbide tools on GFRP-Steel stacked composite
20. Surface and subsurface formation mechanism of SiCp/Al composites under ultrasonic scratching10.1016/j.ceramint.2022.09.055 ↗
21. Study on surface defect formation mechanism in ultrasonic vibration-assisted grinding of SiCp/Al composites10.1007/s00170-023-12253-9 ↗
22. Study on the surface integrity of micro-holes in high volume fraction SiCp/Al using ultrasonic vibration drilling10.1007/s00170-024-14666-6 ↗
23. Surface characteristics of machined aluminium metal matrix composites10.1016/j.ijmachtools.2006.01.003 ↗
24. State-of-the-art of surface integrity in machining of metal matrix composites10.1016/j.ijmachtools.2019.05.006 ↗
25. On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining10.1016/j.jmatprotec.2020.116875 ↗
26. Promoted SiC particle fracturing-based surface smoothing of SiCp/Al composites by in-situ laser-assisted diamond turning10.1016/j.precisioneng.2025.06.008 ↗
27. Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites10.1016/j.compstruct.2018.07.076 ↗
28. Finite element and experimental analysis of machinability during machining of high-volume fraction SiCp/Al composites10.1007/s00170-016-9933-1 ↗
29. Experimental and FEM study of cutting mechanism and damage behavior of ceramic particles in orthogonal cutting SiCp/Al composites10.1016/j.ceramint.2020.11.072 ↗
30. Mechanistic insights into the link between milling-induced surface layer particle damage and mechanical property evolution of SiCp/2009Al composite thin-walled parts10.1016/j.jmatprotec.2025.118932 ↗
31. Coupled effect of tool geometry and tool-particle position on diamond cutting of SiCp/Al10.1016/j.jmatprotec.2022.117510 ↗
32. Strengthening and fracture behaviors in SiCp/Al composites with network particle distribution architecture10.1016/j.msea.2018.10.105 ↗
33. Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning10.1016/j.ceramint.2022.12.226 ↗
34. Study on the grindability and removal mechanism of high volume fraction SiCp/Al composites based on single diamond grain grinding10.1007/s43452-024-01028-y ↗
35. On understanding the cutting mechanism of SiCp/Al composites during ultrasonic elliptical vibration-assisted machining10.1016/j.jmrt.2023.10.277 ↗
36. Surface and subsurface response to the in-situ laser assistance in ultra-precision diamond turning of SiCp/Al composites10.1016/j.jmrt.2024.05.092 ↗
37. Material removal mechanism of cryogenic-laser assisted cutting for SiCp/Al composites10.1016/j.optlastec.2025.113396 ↗
38. Investigation of surface integrity transition of SiCp/Al composites based on specific cutting energy during ultrasonic elliptical vibration assisted cutting10.1016/j.jmapro.2022.04.067 ↗
39. Cumulative tool wear in machining metal matrix composites part II: machinability10.1016/0924-0136(95)02115-9 ↗
40. A review on cutting of industrial ceramic materials10.1016/j.precisioneng.2019.05.009 ↗
41. Study on characteristics of SiCp/Al composites during high-speed milling with different particle size of PCD tools10.1007/s00170-017-1350-6 ↗
42. Investigation on cutting mechanisms of machining SiCp/Al based on strain gradient theory10.1016/j.jmapro.2024.04.034 ↗
43. Study of ultrasonic vibration-assisted grinding SiCp/Al composites: Surface formation mechanism considering interface failure and process method towards low surface defects10.1016/j.jmapro.2024.10.031 ↗
44. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures, and pressures10.1016/0013-7944(85)90052-9 ↗
45. Cutting deformation mechanism of SiCp/Al composites based on strain gradient theory
46. Finite element and experimental studies of the cutting process of SiCp/Al composites with PCD tools10.1007/s00170-010-2776-2 ↗
47. Prediction of interfacial strength and failure mechanisms in particle-reinforced metal-matrix composites based on a micromechanical model10.1016/j.engfracmech.2015.06.001 ↗
48. Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)10.1016/j.ijmachtools.2008.03.013 ↗
49. Simulation study on defect formation mechanism of the machined surface in milling of high volume fraction SiCp/Al composite10.1007/s00170-015-6876-x ↗
50. Microstructure-based numerical simulation of the tensile behavior of SiCp/Al composites10.1007/s11665-013-0805-7 ↗
51. Tensile strength of particle reinforced composite with interfacial debonding10.1016/j.engfracmech.2024.110110 ↗
52. Study on strain rate and heat effect on the removal mechanism of SiC during nano-scratching process by molecular dynamics simulation10.1016/j.ijmecsci.2018.12.022 ↗
53. Digital image correlation analysis and modelling of the strain rate in metal cutting10.1016/j.cirp.2021.04.055 ↗
54. Analytical prediction of cutting tool temperature distribution in orthogonal cutting including third deformation zone10.1016/j.jmapro.2021.05.003 ↗
55. Fabrication and characterization of SiC-reinforced aluminium matrix composite for brake pad applications10.3390/met13030584 ↗
56. Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix
57. An atomistic-to-microscale computational analysis of the dislocation pileup-induced local stresses near an interface in plastically deformed two-phase materials10.1016/j.actamat.2022.117663 ↗
58. Mechanical properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy at elevated temperatures10.1016/j.actamat.2021.116982 ↗
59. Development of a dynamic constitutive model with particle damage and thermal softening for Al/SiCp composites10.1016/j.compstruct.2020.111856 ↗
60. Study on the inhibition mechanism and removal mechanism of non-uniform removal of composite materials by multiphysics coupling polishing method10.1016/j.jmatprotec.2025.118841 ↗