Mechanical performance and formability of 2024 – T4 Al and CNT / 2024 Al composite joint by refill friction stir spot welding
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Advancements in lightweight materials for aerospace structures: a comprehensive review10.61359/11.2106-2409 ↗
2. Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs)10.1007/s10853-017-1378-x ↗
3. A review on tribological and mechanical properties of Al alloy composites10.1016/j.matpr.2019.09.032 ↗
4. Metal-matrix composites for space applications10.1007/s11837-001-0139-z ↗
5. Friction and wear behavior of Al–CNT composites10.1016/j.wear.2013.08.021 ↗
6. Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression10.1016/j.msea.2019.138141 ↗
7. Fracture and fatigue life of Al-based MMCs machined at different conditions10.1016/j.engfracmech.2018.01.013 ↗
8. Study on characteristics in high-speed milling SiCp/Al composites with small particles and high volume fraction by adopting PCD cutters with different grain sizes10.1007/s00170-019-03374-1 ↗
9. Effect of ceramic particles on microstructure and mechanical properties of aluminium alloy resistance spot-welded joints10.1016/j.matdes.2025.114661 ↗
10. Microscopic residual stress evolution at the SiC/Al interface during nanoindentation via molecular dynamics simulation
11. CNT-reinforced metal and steel nanocomposites: a comprehensive assessment of progress and future directions10.1016/j.compositesa.2018.08.010 ↗
12. CNT/polymer interface in polymeric composites and its sensitivity study at different environments10.1016/j.cis.2016.12.008 ↗
13. Carbon nanotube reinforced metal matrix composites - a review10.1179/095066009X12572530170543 ↗
14. Strengthening and toughening of aluminum by single-walled carbon nanotubes10.1016/j.msea.2010.11.090 ↗
15. Carbon nanotubes in novel ceramic matrix nanocomposites10.1016/S0272-8842(00)00004-3 ↗
16. Synergistic effect of zero-dimensional spherical carbon nanoparticles and one-dimensional carbon nanotubes on properties of cement-based ceramic matrix: microstructural perspectives and crystallization investigations10.1080/09276440.2015.1076281 ↗
17. Corrosion behaviour of aluminium metal matrix reinforced with multi-wall carbon nanotube10.1016/j.jascer.2017.01.004 ↗
18. Electrical and thermal conductivities of aluminum-based composites containing multi-walled carbon nanotubes10.1177/0021998312456891 ↗
19. Thermal properties of carbon nanotube–copper composites for thermal management applications10.1007/s11671-010-9577-2 ↗
20. Weld seam shape and microstructure of TIG welding of CNTs/Al composite
21. 3D printed PLA plus and PLA-CF using friction stir spot welding: novel solution to additive manufacturing of dissimilar materials10.1007/s11665-026-13330-2 ↗
22. Effects of welding process parameters on the mechanical properties of dissimilar PP and PE polymers joined via FSSW10.1177/09544089261457458 ↗
23. Improving joint quality of hybrid friction stir welded Al/Mg dissimilar alloys by RBFNN-GWO system10.1016/j.jmapro.2020.10.037 ↗
24. Heat-assisted friction stir welding of polymeric nanocomposite10.1080/13621718.2019.1610613 ↗
25. Influences of ultrasonic on friction stir welding of Al/Ti dissimilar alloys under different welding conditions10.1007/s00170-020-06481-6 ↗
26. Microstructure evolution and mechanical properties of CNT/Al composite joints via friction stir welding10.1080/13621718.2022.2106020 ↗
27. Investigation of ultrasonic assisted friction stir spot welding of magnesium alloy to aluminum alloy10.1007/s11223-016-9730-y ↗
28. Refill friction stir spot welding (RFSSW): a review of processing, similar/dissimilar materials joining, mechanical properties and fracture mechanism10.1007/s42243-024-01209-2 ↗
29. Friction stir welding of dissimilar aluminum materials and investigation of surface quality
30. Investigation of the influences of welding parameters on the mechanical properties of tungsten inert gas welded dissimilar aerospace aluminum alloy joints10.1007/s11665-025-11377-1 ↗
31. Fabrication and characterization of carbon nanotube nanocomposites into 2024-T3 Al substrates via friction stir welding process10.1115/1.4026838 ↗
32. Interface reaction and properties of carbon nanotubes-aluminum composites10.1016/j.compositesa.2025.108949 ↗
33. Fracture mechanism of refill friction stir spot-welded 2024-T4 aluminum alloy10.1007/s00170-015-8276-7 ↗
34. Modeling of probeless friction stir spot welding of AA2024/AISI304 steel lap joint10.3390/ma15228205 ↗
35. Numerical simulation of thermal cycle and void closing during friction stir spot welding of AA-2524 at different rotational speeds10.1016/j.matchar.2021.110984 ↗
36. Microstructure and mechanical properties of underwater friction stir welding of CNT/Al-Cu-Mg composites10.1016/j.jmrt.2022.02.089 ↗
37. Hot deformation behaviors and processing maps of 2024 aluminum alloy in as-cast and homogenized states10.1007/s11665-015-1734-4 ↗
38. A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature10.1016/j.metadv.2026.01.005 ↗
39. Enhancing friction stir weldability of 6061-T6 Al and AZ31B Mg alloys assisted by external non-rotational shoulder10.1007/s11665-017-2640-8 ↗
40. Microstructural modification and stress corrosion mechanisms of in-situ rolling friction stir welding joints10.1016/j.matchar.2025.115884 ↗
41. Microstructure and mechanical properties of refill friction stir spot welded joints: effects of tool size and welding parameters10.1016/j.jmrt.2022.11.108 ↗
42. Refilling termination hole in AA 2198–T851 by refill friction stir spot welding10.1016/j.jmatprotec.2017.02.025 ↗
43. Tribological performance of gas tungsten arc welded dissimilar joint of sDSS 2507/IN-625 for marine application10.1007/s43452-023-00832-2 ↗
44. Hook formation and mechanical properties of friction spot welding in alloy 6061-T610.1016/j.jmatprotec.2015.11.026 ↗
45. Thermal deformation behaviors, mechanisms, and microstructure evolution of laminate CNT/2009Al composite10.1016/j.jmrt.2025.01.091 ↗
46. Effect of tool geometry on material flow behavior of refill friction stir spot welding10.1007/s12666-016-0937-1 ↗
47. Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets10.3390/ma14237485 ↗
48. A novel horizontally-forced refill friction stir spot welding based on the sleeve with symmetrically-distributed threads10.1016/j.jmapro.2026.02.032 ↗
49. Refill friction stir spot welding of AA6082-T6 alloy: hook defect formation and its influence on the mechanical properties and fracture behavior10.1016/j.msea.2019.138724 ↗
50. Numerical simulation and metal fluidity analysis of refill friction stir spot welding based on 6061 aluminum alloy10.3390/cryst15060555 ↗
51. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites10.1016/j.carbon.2015.08.112 ↗
52. Effect of adding CNT on dissimilar welding of aluminium alloys by FSW10.1007/s12666-021-02292-9 ↗
53. Achieving highly strengthened Al–Cu–Mg alloy by grain refinement and grain boundary segregation10.1016/j.msea.2020.139668 ↗
54. Clustering kinetics during natural ageing of Al-Cu based alloys with (Mg, Li) additions10.1016/j.actamat.2018.07.035 ↗
55. Use of hardness, PIP and tensile testing to obtain stress-strain relationships for metals10.1016/j.mechmat.2023.104846 ↗
56. Microstructure and failure mechanisms of refill friction stir spot welded 7075-T6 aluminum alloy joints10.1016/j.matdes.2012.08.026 ↗
57. Refill friction stir spot welding of 5083-O aluminum alloy10.1016/j.jmst.2017.02.011 ↗
58. A fully coupled thermo-mechanical numerical modelling of the refill friction stir spot welding process in Alclad 7075-T6 aluminium alloy sheets10.1007/s43452-020-00127-w ↗
59. Material flow during refill friction stir spot welded dissimilar Al alloys using a grooved tool10.1016/j.jmapro.2019.11.029 ↗
60. Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds10.1016/j.actamat.2005.02.007 ↗
61. Precipitate stability and recrystallisation in the weld nuggets of friction stir welded Al–Mg–Si and Al–Mg–Sc alloys10.1016/j.msea.2008.02.006 ↗
62. Recent advances in friction-stir welding – process, weldment structure and properties10.1016/j.pmatsci.2008.05.001 ↗
63. Friction stir processing of Al–CNT composites
64. Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite10.1016/j.carbon.2016.03.038 ↗
65. Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing10.1016/j.carbon.2011.12.034 ↗
66. Friction stir welding of multi-walled carbon nanotubes reinforced Al matrix composites10.1016/j.matchar.2018.09.033 ↗
67. Effect of sintered reinforcement on characteristics of MWCNT-reinforced aluminum alloy composite via friction stir processing10.2320/matertrans.M2019025 ↗
68. Refill friction stir spot and resistance spot welding of aluminium joints with large total sheet thicknesses (III-1965-19)10.1007/s40194-020-00922-2 ↗
69. A numerical modelling approach to predict material flow and defect formation in refill friction stir spot welded joints10.1007/s00170-025-16092-8 ↗
70. Effect of plunge speeds on hook geometries and mechanical properties in friction stir spot welding of A6061-T6 sheets10.1007/s00170-014-5632-y ↗
71. A novel friction stir lap welding based on the two-layered large-helix-angle thread probe10.1016/j.jmapro.2026.05.022 ↗
72. Effect of welding speed on joint feature and mechanical properties of friction stir lap welding assisted by external stationary shoulders10.1007/s00170-016-9240-x ↗
73. Effect of sleeve Plunge depth on microstructure and mechanical properties of refill friction stir spot welding of 2198 aluminum alloy10.1007/s11665-017-2929-7 ↗
74. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer10.1016/j.matdes.2014.09.020 ↗
75. Pin plunging reinforced refill friction stir spot welding of Alclad 2219 to 7075 alloy10.1016/j.jmatprotec.2020.116760 ↗
76. A novel friction stir diffusion bonding process using convex-vortex pin tools10.1016/j.jmst.2020.01.042 ↗
77. Simultaneously improved strength and ductility in aluminum matrix composite with heterogeneous structures under impact loadings10.1016/j.jmrt.2022.12.187 ↗
78. Effects of solution and aging treatments on the microstructure and mechanical properties of cold rolled 2024 Al alloy sheet10.1016/j.jmrt.2021.03.051 ↗
79. Effect of rotational speed on microstructure and mechanical properties of refill friction stir spot welded 2024 Al alloy10.1007/s11665-016-1999-2 ↗