Microstructure and mechanical properties of explosively welded joints between 06Cr18Ni11Ti stainless steel tube and Ti–4Al–2V alloy rod
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Small modular reactors: an overview of modeling, control, simulation, and applications10.1109/ACCESS.2024.3351220 ↗
2. Oxide formation on titanium alloys in primary water of nuclear pressurised water reactor10.1016/j.corsci.2019.01.020 ↗
3. Study of corrosion kinetics and microstructure of α-phase pure titanium tube in environment 300°C and 8.6MPa water10.1016/j.corsci.2019.108217 ↗
4. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
5. Laser assisted diffusion bonding of TC4 titanium alloy to 301 stainless steel using a Ni interlayer10.1016/j.jmrt.2022.09.065 ↗
6. Ti-Fe intermetallics analysis and control in joining titanium alloy and stainless steel by laser metal deposition10.1016/j.jmatprotec.2016.11.010 ↗
7. Effects of Ni addition on removing Fe-Ti intermetallic compounds in cold metal transfer arc-brazed TC4/304L dissimilar joints10.1016/j.jmapro.2019.01.012 ↗
8. The diffusion characteristics of Fe-Ti during shear-extrusion solid-state bonding and the influence of the level of deformation10.1016/j.matdes.2025.114382 ↗
9. An overview on the microstructure and properties of Fe/Ti based dissimilar joints10.1080/02670836.2023.2229604 ↗
10. Strength improvement and interface characteristic of direct laser welded Ti alloy/stainless steel joint10.1016/j.matlet.2018.08.014 ↗
11. Compositional gradient induced by heterogeneous domain synergy strategy toward high-performance diffusion bonding10.1016/j.compositesb.2025.112330 ↗
12. Interfacial modification of titanium/steel composites and its effect on the growth pattern of Fe-Ti compounds
13. Investigating the microstructure and mechanical properties in furnace brazing Ti–6Al–4V to 17-4 PH stainless steel dissimilar joint with BNi-2 filler metal
14. Brazing TC4 titanium alloy/316L stainless steel joint with Ti50-xZrxCu39Ni11 amorphous filler metals10.1016/j.jallcom.2020.156650 ↗
15. Advances in mechanism and application of diffusion bonding of titanium alloys10.1016/j.jmatprotec.2025.118736 ↗
16. A new method of dissimilar friction welding of titanium to stainless steel10.1016/j.matpr.2021.01.675 ↗
17. Inhomogeneous interface structure and mechanical properties of rotary friction welded TC4 titanium alloy/316L stainless steel joints10.1016/j.jmapro.2018.05.001 ↗
18. Role of intermetallic compounds in the fracture of double-sided friction stir welded titanium-steel clad plates10.1016/j.matchar.2025.114757 ↗
19. Bonding mechanism and preparation process of titanium/iron composite thin sheet by non-vacuum rolling
20. Microstructure characterization and tensile shear failure mechanism of the bonding interface of explosively welded titanium-steel composite10.1016/j.msea.2021.141559 ↗
21. Effect of microstructure on mechanical properties of titanium-steel explosive welding interface10.1016/j.msea.2021.142260 ↗
22. A modified version of friction stir welding process of aluminum alloys: analyzing the thermal treatment and wear behavior
23. Comparison of the weldability of AA6061-T6 joint under different friction stir welding conditions10.1007/s11665-020-05379-4 ↗
24. Comparison of different welding methods on mechanical properties and formability behaviors of tailor welded blanks (TWB) made from AA6061 alloys10.1177/0954406220952504 ↗
25. Microstructure and mechanical-property evolution of the explosive welding joint from the same RAFM steels under explosive welding and post-weld heat treatment10.1016/j.msea.2024.147465 ↗
26. Microstructure development during explosive welding of metal foil:morphologies, mechanical behaviors and mechanisms10.1016/j.compositesb.2021.108685 ↗
27. Energy balance during explosive welding10.1016/j.jmatprotec.2015.03.024 ↗
28. Benefits of intermediate-layer formation at the interface of Nb/Cu and Ta/Cu explosive clads10.1016/j.matdes.2019.107610 ↗
29. Review of the weldability window in explosive welding processes
30. Hierarchical microstructure of explosive joints: example of titanium to steel cladding10.1016/j.msea.2010.11.092 ↗
31. Depiction of interfacial characteristic changes during impact welding using computational methods: comparison between arbitrary lagrangian-eulerian and eulerian simulations10.1016/j.matdes.2016.04.025 ↗
32. Numerical studies on explosive welding with ANFO by using a density adaptive SPH method10.1016/j.jmapro.2019.03.039 ↗
33. Improved properties and thermal stability of a titanium-stainless steel solid-state weld with a niobium interlayer10.1016/j.jmst.2020.11.050 ↗
34. Fabrication and characterization of the Ni–Al energetic structural material with high energy density and mechanical properties10.1016/j.jallcom.2020.154894 ↗
35. Principles and practice of explosive metalworking
36. Effect of the hardness of welded materials on the position of the lower limit of explosive welding10.1007/BF00750461 ↗
37. Numerical simulation of explosive welding of alumimum/stainless steel bimetallic tubes
38. Review of the weldability window concept and equations for explosive welding10.1088/1742-6596/500/5/052038 ↗
39. Study on weldability window and interface morphology of steel tube and tungsten alloy rod welded by explosive welding10.1016/j.ijrmhm.2019.105005 ↗
40. The influence of collision parameters of the strength and microstructure of an explosion welded aluminium alloy
41. Explosive welding of stainless steel–carbon steel coaxial pipes10.1007/s10853-011-5841-9 ↗
42. Analysis of explosive bonding parameters10.1080/10426910600611136 ↗
43. Evaluation of strain-induced martensite formation and mechanical properties in N-alloyed austenitic stainless steels by in situ tensile tests10.1016/j.msea.2021.140930 ↗
44. High cooling rates and metastable phases at the interfaces of explosively welded materials10.1016/j.actamat.2017.06.038 ↗
45. Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding10.1016/j.msea.2017.02.075 ↗
46. Interface morphology and mechanical properties of al-cu-al laminated composites fabricated by explosive welding and subsequent rolling process10.1007/s12540-016-5687-4 ↗
47. Influence of variation ambient system on dissimilar friction stir welding of Al alloy to Mg alloy by the addition of nanoparticles and interlayer10.1007/s12540-024-01670-4 ↗
48. Wave formation in impact welding: study of the Cu–Ti system10.1016/j.cirp.2019.04.058 ↗
49. Experimental and numerical investigation of interfacial microstructure in fully age-hardened 15-5 PH stainless steel during impact welding10.1007/s10853-019-03546-0 ↗
50. Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling10.1016/j.matdes.2015.08.021 ↗
51. Investigation on structural feature and bonding performance of hastelloy foil/steel explosive welding composites under different explosive loads10.1016/j.compstruct.2024.118449 ↗
52. Shear bands in materials processing: understanding the mechanics of flow localization from Zener's time to the present10.1115/1.4049353 ↗
53. Microstructure and mechanical properties investigation of explosively welded titanium/copper/steel trimetallic plate10.1016/j.matchar.2022.112250 ↗
54. The mechanisms of γ (Fcc) → ε (hcp) → α′ (bcc) and direct γ (fcc) → α′ (bcc) martensitic transformation in a gradient austenitic stainless steel10.1007/s10853-022-06936-z ↗
55. Microstructural evolution and mechanical properties of 316 austenitic stainless steel by CGP10.1016/j.msea.2021.141105 ↗
56. Prediction of generation of High- and low-angle grain boundaries (HAGB and LAGB) during severe plastic deformation10.1007/s11661-020-05873-3 ↗
57. The response of dislocations, low angle grain boundaries and high angle grain boundaries at high strain rates10.1016/j.msea.2021.141704 ↗
58. Microstructure and mechanical properties of aluminum-steel dissimilar metal welded using arc and friction stir hybrid welding10.1016/j.matdes.2022.111520 ↗
59. Microstructure and texture evolution of cold-rolled low-Ni cr–mn–n austenitic stainless steel during bending10.1007/s10853-020-05611-5 ↗
60. Microstructure and texture of high manganese steel subjected to dynamic impact loading10.1080/02670836.2020.1747187 ↗
61. Mechanical behavior of 304 austenitic stainless steel processed by cryogenic rolling10.1016/j.matpr.2018.04.090 ↗
62. Mechanical behaviour and microstructure of Fe-20/27Mn–4Al-0.3C low magnetic steel at room and cryogenic temperatures10.1016/j.msea.2021.140998 ↗
63. Metastability-engineering strategy in CoCrFeMnNi-based medium- and high-entropy alloys: unraveling the interplay with recrystallization, grain growth, and mechanical properties10.1016/j.ijplas.2025.104285 ↗
64. Stacking fault energy of cryogenic austenitic steels
65. Optimality of general lattice transformations with applications to the Bain strain in steel
66. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
67. Twinning and martensite in a 304 austenitic stainless steel10.1016/j.msea.2012.05.080 ↗
68. Anisotropy in microstructure and shear properties of TA2/Q235 explosive welding interfaces10.1016/j.jmrt.2023.07.080 ↗
69. Microstructure and property inhomogeneity investigations of bonded Zr/Ti/steel trimetallic sheet fabricated by explosive welding10.1016/j.jallcom.2016.12.213 ↗
70. Fabrication of reinforced Al-Mg composite by TiC particles via FSW: microstructure and tribology study10.1016/j.jmrt.2024.05.066 ↗
71. Study on element mixing of titanium-stainless steel dissimilar metal welding pool and its effect on joint properties in nanosecond laser welding10.1016/j.jmatprotec.2025.118836 ↗
72. Formation of nonequilibrium phases at collision interface in an explosively welded Ti/Ni clad10.2320/matertrans1989.36.1338 ↗
73. Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures10.1016/j.ijplas.2018.10.005 ↗
74. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗