Redesign of maraging steel: Realization of lightweightness and cost-efficiency without sacrificing mechanical properties
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Progress on improving strength-toughness of ultra-high strength martensitic steels for aerospace applications: a review10.1016/j.jmrt.2022.12.177 ↗
2. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
3. Current state of Fe-Mn-Al-C low density steels10.1016/j.pmatsci.2017.05.002 ↗
4. The physical metallurgy of maraging steels10.1179/imr.1968.13.1.115 ↗
5. Maraging steels: making steel strong and cheap10.1038/nmat4949 ↗
6. Fracture characteristics of a burst tested maraging steel rocket motor case10.1007/BF01026331 ↗
7. Mouritz · 2012
8. 2021
9. Clustering, nano-scale precipitation and strengthening of steels10.1016/j.pmatsci.2020.100764 ↗
10. Progress in understanding the metallurgy of 18% nickel maraging steels10.1515/ijmr-2006-0248 ↗
11. Microstructure and mechanical properties of a 2000 MPa Co-free maraging steel after aging at 753 K10.1007/s11661-004-0221-6 ↗
12. Development of new low nickel, cobalt free maraging steel10.1179/mst.1991.7.12.1082 ↗
13. Tensile and impact properties of low nickel maraging steel10.1016/j.msea.2013.08.076 ↗
14. Microstructure evolution and strengthening mechanisms of Fe–23Mn–0.3C–1.5Al TWIP steel during cold rolling10.1016/j.msea.2014.08.051 ↗
15. Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel10.1016/j.actamat.2016.02.001 ↗
16. Precise calculation of crystallite size of nanomaterials: a review10.1016/j.jallcom.2023.171914 ↗
17. Dislocation density-based fatigue approach for structural steel details10.1016/j.istruc.2023.105825 ↗
18. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
19. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
20. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
21. The study on 9% nickel low carbon steels—the precipitation of austenite and the microstructure
22. The microstructure of lath martensite in quenched 9Ni steel10.1016/j.actamat.2014.01.058 ↗
23. Bhadeshia · 2006
24. Extension of the martensite transformation temperature relation to larger alloying elements and contents10.1002/adem.201300116 ↗
25. Phase transformation and mechanical properties of si-free CMnAl transformation-induced plasticity-aided steel10.1007/s11661-002-0378-9 ↗
26. Development of high manganese high nitrogen low activation austenitic stainless steels10.1016/0022-3115(86)90147-9 ↗
27. Driving force for martensitic transformation in steels10.1179/030634581790426714 ↗
28. Effects of cold rolling reduction ratio on microstructures and tensile properties of intercritically annealed medium-Mn steels10.1016/j.msea.2019.02.091 ↗
29. On the selection of the optimal intercritical annealing temperature for medium Mn TRIP steel10.1007/s11661-013-1860-2 ↗
30. Bone-like crack resistance in hierarchical metastable nanolaminate steels10.1126/science.aal2766 ↗
31. A critical review on Medium-Mn steels: mechanical properties governed by microstructural morphology10.1002/srin.202200238 ↗
32. Improving toughness of medium-Mn steels after friction stir welding through grain morphology tuning10.1016/j.jmst.2021.12.023 ↗
33. Transition from diffusive to displacive austenite reversion in low-alloy steel10.2355/isijinternational.53.2275 ↗
34. Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning10.1016/j.actamat.2020.116561 ↗
35. Grain boundary discontinuous precipitation reactions10.1179/imr.1981.26.1.153 ↗
36. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
37. State-of-the-knowledge on TWIP steel10.1179/1743284711Y.0000000095 ↗
38. Comparative study of tensile properties and impact toughness of duplex lightweight steel10.1016/j.msea.2024.147107 ↗
39. Elastic strain energy induced by epsilon martensitic transformation and its contribution to the stacking-fault energy of austenite in Fe–15Mn–xC alloys10.1016/j.jallcom.2014.08.054 ↗
40. Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels10.1007/s11661-009-0050-8 ↗
41. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
42. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel10.1016/j.msea.2006.12.170 ↗
43. Atomic-resolution defect contrast in low angle annular dark-field STEM10.1016/j.ultramic.2012.03.013 ↗
44. Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy10.1038/s41467-023-35863-z ↗
45. Ductile 2-GPa steels with hierarchical substructure
46. Strain rate dependence of strengthening mechanisms in ultrahigh strength lath martensite10.1016/j.ijplas.2022.103495 ↗
47. Simultaneous enhancement of strength and ductility in a medium carbon low-alloy steel induced by secondary martensite and Cu-rich particles10.1016/j.msea.2023.144791 ↗
48. Effect of partitioning treatment on the strengthening and plasticising mechanism of one-step quenching and partitioning steels10.1016/j.jmrt.2024.06.105 ↗
49. Designing new corrosion resistant ferritic heat resistant steel based on optimal solid solution strengthening and minimisation of undesirable microstructural components10.1016/j.commatsci.2013.12.009 ↗
50. Temperature dependence of the flow stress of Fe–18Mn–0.6C–xAl twinning-induced plasticity steel10.1016/j.actamat.2013.07.042 ↗
51. Modelling solid solution hardening in stainless steels10.1016/j.msea.2005.09.031 ↗
52. Precipitation hardening in metals10.1179/026708399773002782 ↗
53. Statistic derivation of Taylor factors for polycrystalline metals with application to pure magnesium10.1016/j.msea.2013.06.025 ↗
54. Enhancement of the tensile properties and impact toughness of a medium-Mn steel through the homogeneous microstrain distribution10.1016/j.matchar.2021.110992 ↗
55. Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel10.1016/j.msea.2009.11.046 ↗
56. Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9 wt.% medium Mn steel10.1016/j.actamat.2014.12.021 ↗