Effects of CuNi addition on melting behavior, microstructure and mechanical properties of Sn solder joints bonded on Cu substrate
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (25)
Show source-provided references
1. Reliability of Ni-modified reduced graphene oxide reinforced Sn-58Bi/Cu solder joints after isothermal aging10.1016/j.matdes.2026.116092 ↗
2. Mechanistic investigation into synergistic effects of Sb and Bi on enhancing properties and solder joint reliability of Sn-3.0Ag-0.5Cu: experiments and first-principles calculations10.1016/j.matchar.2026.116477 ↗
3. Fast formation of AuSn4 intermetallic compound and its influence on the mechanical property of Au/Sn solder joint10.1016/j.msea.2025.149492 ↗
4. Shear strength and fracture mechanism for full Cu-Sn IMCs solder joints with different Cu3Sn proportion and joints with conventional interfacial structure in electronic packaging10.1108/SSMT-06-2018-0018 ↗
5. Effect of CNTs on the intermetallic compound growth between Sn solder and Cu substrate during aging and reflowing10.1007/s10854-020-04755-z ↗
6. Mechanics and thermal behavior of Cu-Sn solder reinforced by skeleton intermetallic compounds: insights from molecular dynamics and experiments
7. Finite element method modeling of temperature gradient-induced Cu atomic thermomigration in Cu/Sn/Cu micro solder joint10.1016/j.microrel.2022.114479 ↗
8. Effect of undercooling on microstructure evolution of Cu based alloys10.1016/j.jallcom.2022.167998 ↗
9. Microstructure evolution and grain refinement mechanism of rapidly solidified single-phase copper based alloys10.1016/j.jmst.2022.04.025 ↗
10. Influence of indium addition on microstructural and mechanical behavior of Sn solder alloys: experiments and first principles calculations10.1016/j.actamat.2023.118853 ↗
11. Interfacial microstructure evolution and tensile behavior of Sn-xAg micro solder joints during aging10.1016/j.jmrt.2025.03.146 ↗
12. Microstructure and mechanical properties of Sn-xGa alloys and solder joints10.1016/j.jmrt.2023.08.151 ↗
13. Interfacial evolution of pure Sn solder bearing silicon carbide nanowires under isothermal aging and thermal cycling10.1016/j.jmrt.2021.10.022 ↗
14. Nonequilibrium solidification, grain refinements, and recrystallization of deeply undercooled Ni-20 at. Pct Cu alloys: effects of remelting and stress10.1007/s11661-017-4194-7 ↗
15. Concentration and fluid flow effects on kinetics, dendrite remelting and stress accumulation upon rapid solidification of deeply undercooled alloys10.1016/j.jallcom.2018.02.065 ↗
16. Observation of dendrite growth velocity and microstructure transition in highly undercooled single phase alloys10.1016/j.matchar.2019.109793 ↗
17. Effect of Cu addition on the microstructure and mechanical properties of In-Sn-based low-temperature alloy10.1016/j.msea.2021.140785 ↗
18. Copper effects in mechanical, thermal and electrical properties of rapidly solidified eutectic Sn-Ag alloy10.1007/s10854-018-8906-6 ↗
19. Microwave hybrid joining of SAC305-Ni@Sn composite solder: heating mechanism, mechanical reliability, and first-principles calculation10.1016/j.msea.2025.149338 ↗
20. First-principles investigation of the structural and electronic properties of Cu6-xNixSn5 (x= 0, 1, 2) intermetallic compounds10.1016/j.intermet.2007.05.005 ↗
21. Interfacial structures and mechanical properties of Cu/Sn/Cu containing SiC nanowires under transient liquid phase bonding
22. Effect of bonding temperature on the microstructure, IMCs growth, and shear property of Cu/Sn-9Zn-30Cu/Cu solder joint by transient liquid phase bonding10.1016/j.intermet.2025.108722 ↗
23. Interfacial reaction and shear strength of ultrasonically-assisted Sn-Ag-Cu solder joint using composite flux10.1016/j.jmapro.2020.12.020 ↗
24. Modification of SAC0307/Cu solder joints by FeCoNiCrCu particles: microstructure, comprehensive properties and aging reliability10.1016/j.jmrt.2026.03.032 ↗
25. Effects of Cu@Sn@Ag core-shell particles on microstructure, corrosion and mechanical properties of SAC305 solder joint