Evolution mechanisms of microstructure and mechanical properties in spray-formed H13 during isothermal quenching near Ms and subsequent tempering
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (47)
Show source-provided references
1. Research on integrated casting and forging process of aluminum automobile wheel10.1155/2014/870182 ↗
2. An integrated framework for die and mold cost estimation using design features and tooling parameters10.1007/s00170-004-2084-9 ↗
3. Effects of spray forming and aging treatment on the microstructures and hardness of H13 tool steel
4. Die steel design for additive manufacturing10.1016/j.actamat.2024.120326 ↗
5. On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties10.1016/j.msea.2020.139764 ↗
6. Improvement in fracture toughness of austempered ductile iron by two-step austempering process10.1179/136404610X12693537270091 ↗
7. Quantitative evaluation of the contribution of carbide-free bainite, lath martensite, and retained austenite on the mechanical properties of C-Mn-Si high-strength steels10.1016/j.matchar.2023.112802 ↗
8. Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature10.1016/j.matchar.2017.04.007 ↗
9. Effect of prior martensite formation on the bainite transformation kinetics in high-strength 3% Mn multiphase steel10.1007/s10973-022-11729-2 ↗
10. Influence of martensite/austenite interfaces on bainite formation in low-alloy steels below Ms10.1016/j.actamat.2020.02.003 ↗
11. Roles of pre-formed martensite in below-Ms bainite formation, microstructure, strain partitioning and impact absorption energies of low-carbon bainitic steel10.1016/j.jmst.2021.05.002 ↗
12. Effect of bainite isothermal quenching on microstructure and thermal fatigue performance of H13 hot working die steel
13. Effect of ultra-fine martensite and retained austenite induced by slow quenching on the mechanical properties of 9Cr 1.5Mo1Co(FB2) steel10.1016/j.matchar.2021.111452 ↗
14. Enabling strong and formable advanced high-strength steels through inherited homogeneous microstructure10.1016/j.scriptamat.2025.116560 ↗
15. The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels10.1016/j.wear.2019.02.032 ↗
16. C and Mn elements characterization and stability of retained austenite in different locations of quenching and partitioning bainite steels
17. Effects of short-time tempering on impact toughness, strength, and phase evolution of 4340 steel within the tempered martensite embrittlement regime10.1007/s11661-019-05271-4 ↗
18. Studying on tempering transformation and internal friction for low carbon bainitic steel10.1016/j.msea.2016.10.053 ↗
19. Limiting retained austenite decomposition in quenched and tempered steels: influences of rapid tempering and silicon10.2355/isijinternational.ISIJINT-2020-263 ↗
20. Evolution of microstructure and mechanical properties during tempering of M50 steel with bainite/martensite duplex structure10.1016/j.jmrt.2020.04.075 ↗
21. The tempering behavior of martensite/austenite islands on the mechanical properties of a low alloy Mn-Ni-Mo steel with granular bainite
22. Microstructure and high-temperature tensile behavior of spray-formed modified 2000MPa H13 hot work die steel with 0.5wt % carbon10.1016/j.msea.2022.143102 ↗
23. A dilatometric analysis of inverse bainite transformation10.1007/s10853-017-1752-8 ↗
24. 28-Formation of bainite below the MS temperature: kinetics and crystallography10.1016/j.actamat.2015.12.027 ↗
25. Effect of NbC and VC carbides on microstructure and strength of high-strength low-alloyed steels for oil country tubular goods10.1016/j.msea.2021.141845 ↗
26. Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels10.1016/j.actamat.2014.10.010 ↗
27. Effect of prior austenite grain size on isothermal bainite transformation in 65Cr steel10.1016/j.matlet.2020.127495 ↗
28. Effect of precipitation phase morphology on mechanical properties of Ni-Ti shape memory alloy
29. Microstructure and tempering softening mechanism of modified H13 steel with the addition of tungsten, molybdenum, and lowering of chromium10.1016/j.matdes.2022.111317 ↗
30. X-ray evaluation of dislocation density in ODS-eurofer steel10.1016/j.msea.2011.11.051 ↗
31. Effect of Ni addition on bainite transformation and properties in a 2000MPa grade ultrahigh strength bainitic steel10.1007/s12540-018-0139-y ↗
32. Effect of alloying elements on the high-temperature tempering of Fe-0.3N martensite10.1016/j.actamat.2020.116612 ↗
33. Investigation of the evolution of retained austenite in Fe-13%Cr-4%Ni martensitic stainless steel during intercritical tempering10.1016/j.matdes.2015.06.143 ↗
34. Production of in situ vanadium carbide particulate reinforced iron matrix composite10.5755/j01.ms.20.4.6445 ↗
35. Effect of pre-existing martensite within the microstructure of nano bainitic steel on its mechanical properties10.1016/j.matchemphys.2020.124160 ↗
36. Initial nucleation kinetics of martensite transformation10.1007/s10853-008-2753-4 ↗
37. Crystallography and morphology of chromium rich eutectic carbides in an As-Cast Fe-Cr-C alloy crystallized in non-equilibrium conditions10.12693/APhysPolA.130.1007 ↗
38. Formation of eutectic carbides in Fe-Cr-Mo-C alloy during non-equilibrium crystallization10.1016/j.matdes.2016.01.028 ↗
39. Dickie · 1927
40. Effect of different production technologies on microstructure and properties of tungsten-molybdenum high-speed steel
41. Simulation of dislocation recovery in lath martensite steels using the phase-field method10.1016/j.commatsci.2016.03.044 ↗
42. High strength (∼2000 MPa) or highly ductile (∼11%) additively manufactured H13 by tempering at different conditions10.1016/j.msea.2019.138845 ↗
43. Zhao · 2008
44. Formation behavior of long needle-like M23C6 carbides in a nickel-based alloy without γ′ phase during long time aging10.1016/j.jallcom.2019.153259 ↗
45. Stability of retained austenite and work hardening behavior in ultra-fine medium carbon bainitic steel10.1016/j.jmrt.2022.12.092 ↗
46. M5C2 carbide precipitates in a High-Cr martensitic steel10.1007/s12540-014-3014-5 ↗
47. 50-Modeling the microstructure-mechanical property relationship for a 12Cr-2W-V-Mo-Ni power plant steel10.1016/S0921-5093(03)00565-3 ↗