Processing explosively-welded age-hardenable Cu–Ni–Si–Cr alloy composite

1. Aluminium alloys - a century of age hardening

2. Precipitation hardening in metals10.1179/026708399773002782 ↗

3. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗

4. Progress on improving strength-toughness of ultra-high strength martensitic steels for aerospace applications: a review10.1016/j.jmrt.2022.12.177 ↗

5. Research on the inner bore profile detecting system of railgun10.1016/j.measurement.2019.107053 ↗

6. Using big area additive manufacturing to directly manufacture a boat hull mould10.1080/17452759.2018.1532798 ↗

7. Recent research and development on forming for large magnesium alloy components with high mechanical properties10.1016/j.jma.2023.09.038 ↗

8. Accessing enhanced uniformity and property in CuNiSiCr alloy by high-temperature recrystallization10.1016/j.msea.2019.138281 ↗

9. Microstructure refinement and corrosion resistance improvement mechanisms of a novel Al-Si-Fe-Mg-Cu-Zn alloy prepared by ultrasonic vibration-assisted rheological die-casting process10.1016/j.corsci.2020.109180 ↗

10. Modified implementation strategy in explosive welding for joining between precipitate-hardened alloys10.1016/j.jmapro.2018.10.046 ↗

11. Effect of microstructure on mechanical properties of titanium-steel explosive welding interface10.1016/j.msea.2021.142260 ↗

12. Interfacial investigation of explosion-welded Al/steel plate: the microstructure, mechanical properties and residual stresses10.1016/j.msea.2021.142525 ↗

13. Experimental and numerical investigation of interface and mechanical properties of Al0.3CoCrFeNi/304L explosively weld composite plate10.1016/j.jmrt.2023.07.079 ↗

14. Interfacial investigations on the microstructure evolution and thermomechanical behavior of explosive welded CLAM/316L composite10.1016/j.jmrt.2023.06.180 ↗

15. Enhancing explosive weldability of thick precipitate-hardened alloys10.1016/j.jmapro.2022.03.041 ↗

16. Effect and mechanism of cold rolling and aging process on microstructure and properties of columnar grain C70250 copper alloy10.1016/j.msea.2021.142577 ↗

17. Simultaneous enhancement of mechanical and electrical properties of Cu–Ni–Si alloys via thermo-mechanical process10.1016/j.msea.2022.142815 ↗

18. Microstructure and properties of Cu–Ni–Co–Si–Cr–Mg alloys with different Si contents after multi-step thermo-mechanical treatment10.1016/j.msea.2022.143532 ↗

19. Effects of pre-deformation on precipitation behaviors and properties in Cu-Ni-Si-Cr alloy10.1016/j.msea.2018.11.045 ↗

20. Influence of multi-pass rolling and subsequent annealing on the interface microstructure and mechanical properties of the explosive welding Mg/Al composite plates10.1016/j.msea.2018.03.042 ↗

21. Effect of heat treatment on bonding interface in explosive welded copper/stainless steel10.1016/j.matdes.2012.09.037 ↗

22. Improving mechanical properties of an explosive-welded magnesium/aluminum clad plate by subsequent hot-rolling10.1016/j.jallcom.2021.162957 ↗

23. Effect of annealing temperature and time on the microstructure, mechanical properties and conductivity of cold-rolled explosive Cu/Al composite sheets10.1088/2053-1591/abbba9 ↗

24. Parameter-determined interface morphologies and properties of explosively-welded Cu-Ni-Si-Cr alloy composites10.1016/j.jmrt.2024.06.197 ↗

25. Research progress on advanced rail materials for electromagnetic railgun technology10.1016/j.dt.2020.03.014 ↗

26. Deformation-aging behavior and property evolution of Cu–Ti alloys prepared by accumulative roll bonding-deformation diffusion process10.1016/j.msea.2022.143915 ↗

27. Enhancing the comprehensive properties of as-cast Cu–Ni–Si alloys by continuous extrusion combined with subsequent thermomechanical treatment10.1016/j.matdes.2022.111033 ↗

28. Effect of two-step cryorolling and aging on mechanical and electrical properties of a Cu–Cr–Ni–Si alloy for lead frames applications10.1016/j.msea.2020.140521 ↗

29. Bonding and microstructure evolution in electromagnetic pulse welding of hardenable Al alloys10.1016/j.jmatprotec.2020.116965 ↗

30. Effect of impact loading and heat treatment on microstructure and properties of multi-layered AZ31/AA1050 plates fabricated by single-shot explosive welding10.1016/j.matdes.2022.110411 ↗

31. Metallic materials—tensile testing—Part 1: method of test at room temperature

32. Experimental and numerical investigation of microstructure and evolution of TiNi Alloy/Q235 steel interfaces prepared by explosive welding10.1016/j.jmrt.2021.11.044 ↗

33. Comparison of microstructure and mechanical properties of titanium/steel composite plates by two manufacturing processes10.1007/s42243-018-0038-y ↗

34. Interfaces of the 5083Al/1060Al/TA1/Ni/SUS304 five-layer composite plate fabricated by explosive welding10.1016/j.jmrt.2022.04.157 ↗

35. High cooling rates and metastable phases at the interfaces of explosively welded materials10.1016/j.actamat.2017.06.038 ↗

36. Ultrahigh cooling rates at the interface of explosively welded materials and their effect on the formation of the structure of mixing zones10.1134/S0010508218020132 ↗

37. Greenberg · 2019

38. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment10.1016/S1359-6454(02)00594-3 ↗

39. Microstructural evolution and anisotropic mechanical properties of 316L stainless steel induced by tensile straining10.1007/s11665-021-06253-7 ↗

40. Investigation on the explosive welding of 1100 aluminum alloy and AZ31 magnesium alloy10.1007/s11665-016-2088-2 ↗

41. Investigation of interfacial structure and dynamic mechanical behavior of titanium alloy laminated composites10.1016/j.jmrt.2022.11.101 ↗

42. Research on titanium-copper explosive welding interface with different welding parameters10.1007/s00170-022-10102-9 ↗

43. Dissimilar material welding of tantalum foil and Q235 steel plate using improved explosive welding technique10.1016/j.matdes.2019.108348 ↗

44. Improving the precision of orientation measurements from technical materials via EBSD pattern matching10.1016/j.actamat.2018.08.028 ↗

45. Overcoming the drawbacks of plastic strain estimation based on KAM10.1016/j.ultramic.2017.08.013 ↗

46. Wire-arc directed energy deposition of Ti–6Al–4V alloy using CO2 active interpass cooling: phase composition, grain orientation, texture strength, dislocation density and mechanical property10.1016/j.jmrt.2023.12.262 ↗

47. Electron backscatter diffraction study on early recrystallization of ultra-low carbon steel

48. Electron backscatter diffraction investigation of local misorientations and orientation gradients in connection with evolution of grain boundary structures in deformed and annealed zirconium. A new approach in grain boundary analysis10.1107/S0021889812052016 ↗

49. Recrystallization in an Mg-Nd alloy processed by high-pressure torsion: a calorimetric analysis10.1016/j.jmrt.2020.01.035 ↗

50. Stored energy and recrystallization temperature in high purity copper after equal channel angular pressing10.1007/s10853-008-2903-8 ↗

51. Microstructure evolution, grain refinement, and mechanical properties of a metastable β titanium alloy during cold rolling and recrystallization annealing10.1016/j.matchar.2024.113632 ↗

52. Electron backscatter diffraction study on microstructure, texture, and strain evolution in Armco iron severely deformed by the differential speed rolling method10.1007/s11661-015-2760-4 ↗

53. Interfacial microstructure and mechanical properties of explosively welded Mg/Al alloy plates10.1007/s11665-022-06843-z ↗

54. Fine structure characterization of an explosively-welded GH3535/316H bimetallic plate interface10.1007/s12613-020-2128-7 ↗

55. Precipitation behavior in boundaries and its influence on impact toughness in 22Cr25Ni3W3CuCoNbN steel during short-term ageing10.1016/j.msea.2021.140924 ↗

56. Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: role of grain boundaries10.1016/j.actamat.2021.117470 ↗

57. Control of dislocation density maximizing precipitation strengthening effect10.1016/j.jmst.2022.03.010 ↗

58. A new ultrahigh strength Cu–Ni–Si alloy10.1016/j.intermet.2013.05.013 ↗

59. P. Villars, K. Cenzual, Cr3Si crystal structure: datasheet from "PAULING FILE multinaries edition – 2022" in SpringerMaterials springer-verlag Berlin heidelberg & material phases data system (MPDS), Switzerland & National Institute for Materials Science (NIMS), Japan.

60. Severe plastic deformation of commercial purity aluminum by rotary swaging: microstructure evolution and mechanical properties10.1016/j.msea.2012.12.046 ↗

61. Strain hardening and softening in a nanocrystalline Ni–Fe alloy induced by severe plastic deformation10.1016/j.msea.2011.01.017 ↗

62. Correlations between microstructures and properties of Cu-Ni-Si-Cr alloy10.1016/j.msea.2018.06.075 ↗

63. Effect of temperature on mechanical behavior of Cu–Cr–Co–Ti alloys10.1016/j.matchar.2023.112904 ↗

64. Effects of pre-aging on microstructure and properties of Cu-Ni-Si alloys10.1016/j.jallcom.2023.169033 ↗

65. Microstructure and properties of Cu-Cr-Zr (Mg) alloys subjected to cryorolling and aging treatment10.1016/j.jallcom.2022.168656 ↗

66. The comprehensive performance and strengthening mechanism of the columnar crystal Cu-Ni-Si alloy after two large deformation rates of cryogenic rolling-aging10.1016/j.jallcom.2022.168281 ↗

67. Study on the microstructure and mechanical properties of explosive welded 2205/X65 bimetallic sheet10.1016/j.matdes.2014.08.013 ↗

68. Effect of inert gas-shielding on the interface and mechanical properties of Mg/Al explosive welding composite plate10.1016/j.jmapro.2019.07.007 ↗

69. Kusner · 2007 · 1

70. Humphreys · 2017

71. Design of uniform nano α precipitates in a pre-deformed β-Ti alloy with high mechanical performance10.1016/j.jmrt.2018.06.006 ↗

72. Effect of cold rolling on the corrosion behavior of Ta-4W alloy in sulphuric acid10.1016/j.corsci.2020.108924 ↗

73. Enhancing pitting corrosion resistance of severely cold-worked high nitrogen austenitic stainless steel by nitric acid passivation10.1149/2.0211913jes ↗

74. Correlation between evolving microstructures and mechanical properties of served inconel 783 superalloys10.1016/j.jallcom.2020.156921 ↗

75. Experiment and multiscale modeling of the coupled influence of constituents and precipitates on the ductile fracture of heat-treatable aluminum alloys10.1016/j.actamat.2005.04.002 ↗

76. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗

77. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗

78. Improvement of strength – ductility balance of B2-strengthened lightweight steel10.1016/j.actamat.2020.03.022 ↗

79. Effects of Fe content on properties and microstructure of Cu–Ti alloys during aging10.1016/j.jmrt.2023.10.211 ↗

80. Improved mechanical strength, ductility, and electrical conductivity of Cu–Ni–Si alloys after multi-pass continuous extrusion and aging processes10.1016/j.matchar.2024.113681 ↗

81. Coarsening mechanism of over-aged δ-Ni2Si nanoscale precipitates in Cu-Ni-Si-Cr-Mg alloy10.1016/j.matchar.2024.113693 ↗

82. Synergistic effects of trace silicon, calcium and cerium on the microstructure and properties of a novel Cu–Cr–Nb–Si–Ca–Ce alloy10.1016/j.msea.2024.146419 ↗

83. Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels10.1016/j.msea.2020.139039 ↗

84. Fatigue of precipitate strengthened Cu–Ni–Si alloy10.1179/026708399101505194 ↗

85. Davis · 2001

86. Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu–Nb alloys10.1016/j.actamat.2006.03.021 ↗

87. Modeling the electrical resistivity of deformation processed metal–metal composites10.1016/j.actamat.2014.06.013 ↗

88. The structure of Ni2Si10.1107/S0365110X52001003 ↗

89. Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers10.1016/j.actamat.2021.116627 ↗

90. Development of a new thermo-mechanical processing route for Nb-5Mo-1Zr-0.1C (wt%) alloy10.1016/j.jallcom.2023.168860 ↗

91. The effect of rolling temperature on the microstructure and properties of multi pass rolled 7A04 aluminum alloy10.1016/j.jmrt.2023.06.123 ↗

92. Atomistic simulation on the formation mechanism of bonding interface in explosive welding10.1063/5.0069720 ↗

93. Study on explosive welding of Ta2 titanium to Q235 steel using colloid water as a covering for explosives10.1016/j.jmrt.2019.09.025 ↗

94. Influence of structure formation and properties of bimetal produced by ultrasound-assisted explosive welding10.1016/j.jmapro.2021.10.006 ↗