Revealing interfacial properties and agglomeration characteristic of rare earth aluminate inclusion in molten steel

1. Contact angle and detachment energy of shape anisotropic particles at fluid-fluid interfaces10.1016/j.jcis.2016.05.060 ↗

2. Transient evolution of inclusions during calcium modification in linepipe steels10.2355/isijinternational.54.2772 ↗

3. Formation and thermodynamics of Mg-Al-Ti-O complex inclusions in mg-al-ti-deoxidized steel10.1007/s11663-014-0121-0 ↗

4. Effects of rare-earth micro-alloying on microstructures, carbides, and internal friction of 51CrV4 steels10.1016/j.jallcom.2020.153849 ↗

5. Effects of iron oxide on crystallization behavior and spatial distribution of spinel in stainless steel slag10.1007/s12613-023-2713-7 ↗

6. Effect of rare earth element yttrium addition on microstructures and properties of a 21Cr-11Ni austenitic heat-resistant stainless steel10.1016/j.matdes.2010.11.022 ↗

7. Influence of La addition on non-metallic inclusions of electrothermal FeCrAl alloy10.1016/j.jallcom.2024.177594 ↗

8. In situ studies of misch-metal particle behavior on a molten stainless steel surface10.1016/j.msea.2007.12.051 ↗

9. Tian C, Yu JK, Weng TP, Jia DB, Liu ZL, Fu PX, et al. Effect of interfacial reaction behaviour on the clogging of SEN in the continuous casting of bearing steel containing rare earth elements. J Alloys Compd 219; 792: 1-7. https://doi.org/10.1016/j.jallcom.2019.04.010.10.1016/j.jallcom.2019.04.010 ↗

10. In-situ observation of collision and agglomeration of La2O3-La2S3 inclusions on surface of molten 304 stainless steels10.1007/s11663-024-03095-1 ↗

11. Three dimensional evaluations of REM clusters in stainless steel10.2355/isijinternational.54.1266 ↗

12. Formation and growth mechanism of clusters in liquid REM-alloyed stainless steels10.2355/isijinternational.ISIJINT-2015-293 ↗

13. Agglomeration of non-metallic inclusions at steel/Ar interface: in-situ observation experiments and model validation10.1007/s11663-017-1027-4 ↗

14. Characteristics of agglomeration of various inclusion particles on molten steel surface10.2355/isijinternational.37.946 ↗

15. “In-situ’’ observation of collision, agglomeration and cluster formation of alumina inclusion particles on steel melts10.2355/isijinternational.37.936 ↗

16. Observation on physical growth of nonmetallic inclusion in liquid steel during ladle treatment10.1007/s11663-011-9497-2 ↗

17. Behavior of alumina-magnesia complex inclusions and magnesia inclusions on the surface of molten low-carbon steels10.1007/s11663-001-0010-1 ↗

18. Effect of magnesium addition on behavior of collision and agglomeration between solid inclusion particles on H13 steel melts10.1002/srin.201600185 ↗

19. In situ studies of agglomeration between Al2O3-CaO inclusions at metal/gas, metal/slag interfaces and in slag10.1179/174328108X284589 ↗

20. Agglomeration mechanism of complex Ti-Al oxides in liquid ferrous alloys considering high-temperature interfacial phenomenon10.1007/s11663-019-01686-x ↗

21. Capillary interaction between inclusion particles on the 16Cr stainless steel melt surface10.1007/s11663-001-0118-3 ↗

22. Agglomeration characteristics of various oxide inclusions in molten steel containing rare earth element under different deoxidation conditions10.2355/isijinternational.ISIJINT-2020-684 ↗

23. Agglomeration characteristics of various inclusions in Al-killed molten steel containing rare earth element10.1007/s11663-020-01938-1 ↗

24. Energetical and force approaches to the capillary interactions between particles attached to a liquid-fluid interface10.1006/jcis.1993.1056 ↗

25. Lateral capillary forces between floating submillimeter particles10.1006/jcis.1993.1163 ↗

26. Mechanism of alumina adhesion to continuous caster nozzle with reoxidation of molten steel10.2355/isijinternational.41.1331 ↗

27. Direct measurement of agglomeration force exerted between alumina particles in molten steel10.2355/isijinternational.54.2780 ↗

28. Effect of alumina morphology on the clustering of alumina inclusions in molten iron10.2355/isijinternational.ISIJINT-2015-561 ↗

29. Effect of diameter and contact angle on initial aggregation of solid inclusions in molten steels10.1007/s11663-021-02284-6 ↗

30. Evaluation of inclusion agglomeration behavior in molten steel based on the modified model of cavity bridge force10.1016/j.jmrt.2024.06.055 ↗

31. Capillary interaction between micron-sized Ce2O3 inclusions at the Ar gas/liquid steel interface10.1007/s11663-022-02486-6 ↗

32. Effect of cerium on the wettability between 304 stainless steel and MgO-Al2O3-based lining refractory10.1016/j.ceramint.2020.03.118 ↗

33. Wettability and interfacial behavior between cerium containing stainless steel and MgO-Cr2O3-based lining refractory10.1016/j.jallcom.2020.155877 ↗

34. Wettability of Al2O3, MgO and Ti2O3 by liquid iron and steel10.2355/isijinternational.ISIJINT-2014-820 ↗

35. Interaction between alumina inclusions in molten steel due to cavity bridge force10.2355/isijinternational.ISIJINT-2016-038 ↗

36. The effect of surface roughening of polymers on measured contact angles of liquids10.1016/0166-6622(84)80175-4 ↗

37. An experimental study of contact angle hysteresis10.1006/jcis.1997.4935 ↗

38. Characterization of SiO2 surface treatments using AFM, contact angles and a novel dewpoint technique10.1016/S0927-7757(98)00907-8 ↗

39. Surface tensions of silicates10.1007/BF03377643 ↗

40. The surface tension and density of molten Sc2O3, La2O3, Y2O3, Al2O3, and MgO measured via a pendant droplet method10.1007/s11663-022-02508-3 ↗

41. Effect of oxygen on the wettability of solid oxide with molten iron10.2355/tetsutohagane1955.59.10_1380 ↗

42. Role of interfacial properties in the evolution of Non-metallic inclusions in liquid steel10.2355/isijinternational.ISIJINT-2022-079 ↗

43. Agglomeration of non-metallic inclusions at the steel/Ar interface: model application10.1007/s11663-017-0998-5 ↗

44. MgAl2O4 inclusion agglomeration on the surface of liquid steel10.1007/s11663-019-01688-9 ↗

45. In situ observation of the agglomeration of MgO-Al2O3 inclusions on the surface of a molten GCr15-bearing steel10.1007/s11663-023-02751-2 ↗

46. Degree of undercooling and wettability behavior of liquid steel on single-crystal Al2O3 and MgO substrate under controlled oxygen partial pressure10.2355/isijinternational.ISIJINT-2015-729 ↗

47. Degree of undercooling and contact angle of pure iron at 1933 K on single-crystal Al2O3, MgO and MgAl2O4 under argon atmosphere with controlled oxygen partial pressure10.2355/isijinternational.49.985 ↗

48. Villars