Research on functionally graded bimetallic material of nickel-aluminum bronze/Hastelloy C-276 fabricated via cold metal transfer additive manufacturing

1. Effect of solution aging treatment on corrosion resistance and erosion resistance of laser metal deposition 17-4PHss10.1016/j.engfailanal.2024.109167 ↗

2. Effects of location on the microstructure and mechanical properties of Cu-8Al-2Ni-2Fe-2Mn alloy produced through wire arc additive manufacturing10.1007/s11665-020-04955-y ↗

3. Tribological properties and sulfuric acid corrosion resistance of laser clad CoCrFeNi high entropy alloy coatings with different types of TiC reinforcement10.1016/j.triboint.2023.108870 ↗

4. Microstructural study of additively-manufactured carbon steel-stainless steel 316L - Inconel 625 functionally graded material: simulation and experimental approaches10.1016/j.jmrt.2024.06.123 ↗

5. Effect of Cr additions on the microstructure and corrosion resistance of Diode laser clad CuAl10 coating10.1016/j.surfcoat.2019.125215 ↗

6. Dual Ni/Ni-Co electrodeposited coatings for improved erosion-corrosion behaviour10.1016/j.surfcoat.2019.02.061 ↗

7. Microstructure, wear and corrosion performance of cold metal transfer additive manufactured (Ni, Ti)-Modified nickel aluminum bronze alloy

8. Influence of rare earth metals addition on the corrosion behaviour of copper in alkaline environment10.1016/j.corsci.2012.01.022 ↗

9. Effect of Hf addition on microstructural evolution and corrosion behavior of nickel-based alloys in hydrochloric acid10.1016/j.corsci.2023.111507 ↗

10. Formation and long-time exposure aging of oxides on Ni-Cr and Ni-Cr-X (X=Mo, W) alloys in acidic chloride solutions: Ramifications towards corrosion resistance10.1016/j.apsusc.2024.159998 ↗

11. Achieving high-quality copper alloy to nickel-based superalloy joint by isostatic high-pressure solid-state diffusion bonding10.1016/j.jmatprotec.2025.118747 ↗

12. Copper-nickel functionally magnetic gradient material fabricated via directed energy deposition

13. Messler · 1999

14. Porous functionally graded material based on a new Ti‐25Nb‐5Zr‐(2Sn) alloy produced using the powder metallurgy technique10.1016/j.jallcom.2024.173779 ↗

15. Design of functionally graded Fe-based composites from iron to iron borides (Fe2B/FeB) by in-situ powder metallurgy and evaluation of the post-thermal shock behavior

16. Inconel 625/NiCrWMo functionally graded materials manufactured by direct laser deposition10.1016/j.matchar.2025.114862 ↗

17. Effect of Mg and Cu on microstructure, hardness and wear on functionally graded Al-19Si alloy prepared by centrifugal casting10.1016/j.jmrt.2020.11.050 ↗

18. Additive manufacturing of functionally graded material objects: a review10.1115/1.4039683 ↗

19. Influence of solid solution time on microstructure and precipitation strengthening of novel maraging steels10.1016/j.msea.2024.147535 ↗

20. Research on plasma arc additive manufacturing of Inconel 625 Ni-Cu functionally graded materials10.1016/j.msea.2022.143796 ↗

21. Microstructure and mechanical properties of functionally graded materials alloy 82/AISI 304L by employing WAAM

22. A Novel preparation approach of aluminum-based functionally graded material: auxiliary wire filling gas metal arc directed energy deposition10.1016/j.jallcom.2024.177500 ↗

23. Microstructure and mechanical properties of Ti60-Ti2AlNb functionally graded materials fabricated by laser directed energy deposition10.1016/j.jmrt.2024.10.019 ↗

24. Simulation of residual stress and distortion evolution in dual-robot collaborative wire-arc additive manufactured Al-Cu alloys10.1080/17452759.2024.2409390 ↗

25. Microstructure and mechanical properties of 2319 aluminum alloy deposited by laser and cold metal transfer hybrid additive manufacturing10.1016/j.jmrt.2023.08.312 ↗

26. Effect of path strategy on residual stress and distortion in laser and cold metal transfer hybrid additive manufacturing

27. A two-stage unsupervised approach for surface anomaly detection in wire and arc additive manufacturing10.1016/j.compind.2023.103994 ↗

28. R Zhang, XP Tao, XG Wang, R Zhang, JL Zhou, CH Zhang, S Zhang, XF Sun, YZ Zhou, CY Cui. Effect of tempering temperature on the microstructure, mechanical and wear failure behaviours of a novel high vanadium high-speed steel, Steel Res. Int. 10.1002/srin.202500070.

29. Design, microstructure, wear and corrosion behaviors of laser clad FeNiCoCrMo0.3Nbx hypoeutectic high entropy alloys coatings10.1016/j.matchar.2024.114277 ↗

30. Effect of aging treatment on cavitation erosion resistance and slurry erosion resistance of laser directed energy deposition martensitic aging steel

31. Microstructure evolution, corrosion and corrosive wear properties of NbC-reinforced FeNiCoCr-based high entropy alloys coatings fabricated by laser cladding10.1016/j.engfailanal.2025.109352 ↗

32. An investigation on the wear resistance and mechanism of Fe60-xCo20MoxNi20 (x=10, 15, 20) high-entropy alloy reinforced by μ-phase10.1016/j.wear.2024.205463 ↗

33. The welding metallurgy of HASTELLOY alloys C-4, C-22, and C-27610.1007/BF02645001 ↗

34. First-principles theoretical and experimental studies of effects of ruthenium on precipitation behavior of μ phase and μ/matrix interface stability in Ni-based single crystal superalloys10.1016/j.intermet.2019.106556 ↗

35. Effects of high-temperature aging on precipitation and corrosion behavior of a Ni-Cr-Mo-based Hastelloy C276 superalloy10.1007/s11665-020-04723-y ↗

36. Effects of chromium addition on microstructure and properties of TiC-VC reinforced Fe-based laser cladding coatings10.1016/j.jallcom.2014.06.073 ↗

37. Effects of grain size and orientation on mechanical and tribological characterizations of nanocrystalline nickel films10.1016/j.wear.2013.02.019 ↗

38. Characterization of wire arc additively manufactured titanium aluminide functionally graded material: microstructure, mechanical properties and oxidation behaviour10.1016/j.msea.2018.07.097 ↗

39. Single-crystal laser deposition of superalloys: processing microstructure maps10.1016/S1359-6454(00)00367-0 ↗

40. Wear anisotropy of selective laser melted 316 stainless steel10.1016/j.wear.2019.04.001 ↗

41. Removal of boron from silicon by solvent refining using ferrosilicon alloys10.1007/s11663-014-0236-3 ↗

42. Distribution coefficient of copper in different soils from Egypt and Greece10.1080/00103620802625625 ↗

43. In-situ measurements of solute partition coefficients between solid and liquid phases in Fe-Cr-Ni-Mo-Cu alloys during solidification10.2355/isijinternational.ISIJINT-2019-444 ↗

44. Revealing the influence of high magnetic field on the solute distribution during directional solidification of Al-Cu alloy10.1016/j.jmst.2021.01.058 ↗

45. Evolution of new topologically close-packed phases P and R upon long-term isothermal aging of laser powder bed fusion processed Hastelloy X10.1016/j.jallcom.2024.177597 ↗

46. Effect of Mo addition on microstructure and mechanical properties of Cu-12.5Ni-5Sn alloy

47. P phase precipitation and strengthening behavior of a novel polycrystalline Ni3Al-based intermetallic alloy at 1100 °C10.1016/j.actamat.2023.119601 ↗

48. Porter · 2021

49. Kinetics of the topological inversion of the γ/γ′-microstructure during creep of a nickel-based superalloy10.1016/S1359-6454(01)00290-7 ↗

50. Effect of Mo nanoparticles on microstructure and mechanical properties of Cu alloys by self-propagating and spark plasma sintering10.1016/j.msea.2024.147305 ↗

51. A bimodal and heterogeneous laminate structure with alternately distributed copper-base and nickel-base alloys via multi-material laser powder bed fusion (MM-LPBF) additive manufacturing10.1016/j.matlet.2024.137494 ↗

52. The Interdependence Theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗

53. Microstructure and corrosion behaviour of laser-cladding Al-Ni-TiC-CeO2 composite coatings on S355 offshore steel10.1016/j.jallcom.2018.08.058 ↗

54. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting10.1016/j.actamat.2016.06.009 ↗

55. Normalizing temperature dependence on microstructure, mechanical and wear properties of a novel high-vanadium high-speed steel10.1016/j.matchar.2025.115047 ↗

56. Effects of post heat treatment on the microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy10.1016/j.matchar.2021.111158 ↗

57. Microstructural, mechanical, and corrosion behaviour analysis of Monel 400 fabricated using CMT-WAAM

58. Effects of welding current on microstructure evolution and mechanical behavior of WC-Co/X32 steel joints by resistance spot welding

59. Influence of various heat treatment processes behavior of a novel maraging steel coating process on the microstructure, nanoindentation pattern, and wear10.1016/j.surfcoat.2024.130984 ↗

60. Modulating Heat Input to Optimize Corrosion Resistance of Nickel–Aluminum Bronze Manufactured by Cold Metal Transfer Additive Manufacturing10.3390/ma18102205 ↗

61. Kinetics of phase change. I General theory10.1063/1.1750380 ↗

62. Kinetics of phase change. II transformation-time relations for random distribution of nuclei10.1063/1.1750631 ↗

63. Thermal analysis of non-isothermal crystallization kinetics in glass forming liquids10.1016/0022-3093(79)90169-8 ↗

64. The use of site saturation and Arrhenius assumptions in the interpretation of non-isothermal DTA/DSC crystallization experiments10.1016/0040-6031(92)80008-K ↗

65. Christian · 2002

66. The growth activation energy of sigma phase in nonequal molar CoCrFeNiV low entropy and high entropy alloys10.1016/j.jallcom.2025.178863 ↗

67. Mutation in TCP phases and superior stress rupture life led by W/Mo ratio in Ni-based single crystal superalloys10.1016/j.matlet.2022.131656 ↗

68. The improved physically-mechanism constitutive model for a Ni-Mo-Cr-based superalloy with the pre-precipitation of μ phase in hot forming10.1016/j.jallcom.2024.174934 ↗

69. Local plastic deformation in the vicinity of topologically close-packed phases in a Ni-based single crystal superalloy10.1016/j.matdes.2025.113600 ↗

70. Effects of solutioning and ageing treatments on properties of Inconel-713C nickel-based superalloy under creep loading10.1016/j.msea.2017.11.038 ↗

71. Effects of Ni and Mn contents on precipitation and strengthening behavior in Cu-Ni-Mn ternary alloys

72. Superior hardness–corrosion-resistance combination in a Co-, Cu-modified Ni–Cr–Mo alloy via multiple nanoscale segregation Mechanisms10.1016/j.scriptamat.2021.114389 ↗

73. Laser surface alloying of FeCoCrAlNiTi high entropy alloy composite coatings reinforced with TiC on 304 stainless steel to enhance wear behavior10.1016/j.ceramint.2022.04.049 ↗

74. Cavitation erosion performance and damage mechanism of FeNiCoCrMo0. 3Nb0. 5 hypoeutectic high entropy alloy coatings

75. Electrochemical corrosion behavior in sulfuric acid solution and dry sliding friction and wear properties of laser-cladded CoCrFeNiNbx high entropy alloy coatings10.1016/j.surfcoat.2023.129425 ↗

76. Investigation of microscopic residual stress and its effects on stress corrosion behavior of NiAl bronze alloy using in situ neutron diffraction/EBSD/tensile corrosion experiment10.1016/j.matchar.2020.110351 ↗

77. Aluminium bronze-steel sliding contact in packaging applications: failure analysis and lab-scale tribological tests10.1016/j.engfailanal.2020.104528 ↗

78. Galvanic corrosion characteristics of aluminum alloyed with group IV metals10.1149/1.2426735 ↗

79. Impedance spectroscopy: a powerful tool for Rapid biomolecular screening and cell culture monitoring10.1002/elan.200503371 ↗

80. Corrosion studies on pulse reverse Ni–Mo coatings electrodeposited on Cu substrate10.1016/j.electacta.2024.143828 ↗

81. Multieffects of Mo on enhancement of wear and corrosion resistances of FeCoNiCrMox high entropy alloys coatings prepared by laser powder directed energy deposition10.1016/j.surfcoat.2024.130378 ↗

82. Elucidating different microbiologically influenced corrosion behavior of copper, 90/10 Cu-Ni alloy, 70/30 Cu-Ni alloy and nickel from the perspective of element content10.1016/j.bioelechem.2024.108854 ↗

83. Seawater corrosion resistance of a novel Cu-Ni/γ-Al2O3&CeO2 composite coating on H64 brass10.1016/j.matlet.2023.135642 ↗

84. Effect of temperature gradient on the formed corrosion products films of 70/30 Cu-Ni alloy immersed in 3.5 % NaCl solution10.1016/j.corsci.2025.112715 ↗

85. Corrosion behavior and strengthening mechanism of Ni-Cu alloy coating on NdFeB magnets10.1680/jsuin.24.00025 ↗

86. Effects of pH and Cr content of materials on flow-accelerated corrosion and their prediction10.1016/j.corsci.2024.112632 ↗

87. Corrosion behavior of aluminum bronze under thin electrolyte layers containing artificial seawater10.1016/S1452-3981(23)11160-6 ↗

88. New studies on wear and corrosion behavior of laser cladding FeNiCoCrMox high entropy alloy coating: the role of Mo10.1016/j.ijrmhm.2021.105721 ↗

89. Investigation into the intergranular corrosion behaviour of electron beam welded Hastelloy C-276 sheet using laser displacement sensor10.1016/j.measurement.2019.05.016 ↗