Mechanical performance enhancement of wire-arc directed energy deposited tungsten/steel multi-material structures through heat treatments
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Additive manufacturing of tungsten, tungsten-based alloys, and tungsten matrix composites10.1007/s42864-022-00153-6 ↗
2. Test methods and properties of powder metallurgical materials nature of the low-temperature brittleness of a W-Ni-Fe alloy10.1007/BF00798160 ↗
3. Overview of challenges and developments in joining tungsten and steel for future fusion reactors
4. Investigation on the diffusion bonding of tungsten and EUROFER9710.1016/j.jnucmat.2010.12.121 ↗
5. Interfacial microstructures, residual stress and mechanical analysis of hot isostatic pressing diffusion bonded joint of 93W–4.9Ni–2.1Fe alloy and 30CrMnSiNi2A steel10.1016/j.fusengdes.2020.111602 ↗
6. Wire-arc directed energy deposition of steel onto tungsten substrate: fabricability and mechanical performance of synergistic structures10.1080/17452759.2024.2443578 ↗
7. Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer10.1016/j.msea.2009.04.043 ↗
8. Multi-material additive manufacturing of metals: a review of structures and mechanical characteristics
9. Multi-material structures of Ti6Al4V and Ti6Al4V-B4C through directed energy deposition-based additive manufacturing10.36922/msam.3571 ↗
10. Laser powder bed fusion of 316L stainless steel and K220 copper multi-material10.1080/17452759.2024.2356078 ↗
11. On the relation between microstructure and elastic constants of tungsten/steel composites fabricated by spark plasma sintering10.1016/j.fusengdes.2018.05.056 ↗
12. Abnormal interfacial bonding mechanisms of multi-material additive-manufactured tungsten-stainless steel sandwich structure10.1088/2631-7990/ac5f10 ↗
13. Additive manufacturing of tungsten using directed energy deposition for potential nuclear fusion application10.1016/j.surfcoat.2021.126884 ↗
14. Additive manufacturing of W–Fe composites using laser metal deposition: microstructure, phase transformation, and mechanical properties10.1016/j.msea.2021.141036 ↗
15. Materials characterization of Ti6Al4V to NbZr1 bimetallic structure fabricated by wire arc additive manufacturing
16. Trailblazing multi-material structure: niobium alloy to tungsten–copper composite using wire-arc additive manufacturing
17. Experimental and numerical analysis of residual stress relief mechanisms of local postweld heat treatment in pressure vessels10.1016/j.tws.2024.112487 ↗
18. The effect of cold swaging of tungsten heavy alloy with the composition W91-6Ni-3Co on the mechanical properties10.3390/ma14237300 ↗
19. Effect of alloy composition on the mechanical properties and fracture behavior of tungsten heavy alloys10.15623/ijret.2017.0601026 ↗
20. Heat-treatment effects on a bimetallic additively-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel
21. Tungsten heavy alloy: an alternative plasma-facing material in terms of hydrogen isotope retention10.1088/1741-4326/abb890 ↗
22. Mechanical, materials, and physicochemical effects on the high-temperature tribological behaviour of laser additive manufacturing AlCoCrFeNi2.1 eutectic high-entropy alloys10.1080/17452759.2024.2355640 ↗
23. Microstructure and wear characteristics of austenitic stainless steel coatings fabricated through various directed energy deposition10.36922/msam.4974 ↗
24. Investigating stainless steel/aluminum bimetallic structures fabricated by cold metal transfer (CMT)-Based wire-arc directed energy deposition
25. Wire directed energy deposition of steel-aluminum structures using cold metal transfer process10.1016/j.jmrt.2024.02.110 ↗
26. Pulsed laser generation of ultrasound in a metal plate between the melting and ablation thresholds10.1063/1.4914749 ↗
27. Variation of the mechanical properties of tungsten heavy alloys tested at different temperatures10.1007/s12598-011-0402-6 ↗
28. Finite element modeling of residual stress at joint interface of titanium alloy and 17-4PH stainless steel
29. Characterization of residual stress in a 316H stainless steel weld by neutron diffraction and finite element modeling10.1016/j.jmrt.2025.03.111 ↗
30. Investigation of residual stress distribution in wire-arc directed energy deposited refractory molybdenum alloy utilizing numerical thermo-mechanical analysis and neutron diffraction method10.1016/j.ijrmhm.2025.107149 ↗
31. Residual stress measurements via X-Ray diffraction Cos-α method on various heat-treated inconel 625 specimens fabricated via laser-powder bed fusion
32. The cosα method for X-ray residual stress measurement using two-dimensional detector10.1299/mer.18-00378 ↗
33. Thermal stress relaxation in shot peened and laser peened nickel-based superalloy10.1016/j.jmst.2020.03.059 ↗
34. Bimetallic structure of TZM and NbZr1 fabricated by wire-based directed energy deposition10.1016/j.matlet.2023.135605 ↗
35. Dependence of spin pumping in W/CoFeB heterostructures on the structural phase of tungsten10.1103/PhysRevB.99.014430 ↗
36. Nanostructured tungsten Trioxide (WO 3): synthesis, structural and morphological investigations10.1088/1742-6596/1292/1/012014 ↗
37. HRTEM microstructural characterization of β-WO3 thin films deposited by reactive RF magnetron sputtering
38. Study on hot deformation behavior and strengthening mechanism of Inconel 625 deposited metal at high temperature10.1007/s10853-021-06357-4 ↗
39. The existence of P phase and Ni2Cr superstructure in ni-al-cr-mo system10.1016/S1359-6462(98)00277-2 ↗
40. Effect of heat treatment on bend stress relaxation of pure tungsten10.1016/j.fusengdes.2013.05.052 ↗
41. Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments10.1016/j.ijrmhm.2017.06.001 ↗
42. Corrosion characteristics of heat-treated biomedical grade 316L stainless steel in simulated body fluids
43. Understanding the role of microstructure on creep anisotropy in additively manufactured IN71810.1016/j.matchar.2025.114935 ↗
44. A comprehensive review of residual stresses in carbon steel welding: formation mechanisms, mitigation strategies, and advanced post-weld heat treatment techniques10.1007/s00170-025-15088-8 ↗
45. Microstructural characteristics and mechanical performance of WAAM fabricated LCS–SS 316L bimetallic structure under forced cooling10.1007/s11665-025-10765-x ↗
46. Laser powder bed fusion of inconel 718: residual stress analysis before and after heat treatment10.3390/met9121290 ↗
47. Micro-crack formation and controlling of Inconel625 parts fabricated by selective laser melting
48. Microstructure and mechanical properties of fine-grained W–7Ni–3Fe heavy alloy by spark plasma sintering10.1016/j.msea.2012.04.099 ↗
49. Heat treatment effects on Inconel 625 components fabricated by wire + arc additive manufacturing (WAAM)—Part 1: microstructural characterization10.1007/s00170-019-03828-6 ↗
50. Inconel 625/NiCrWMo functionally graded materials manufactured by direct laser deposition10.1016/j.matchar.2025.114862 ↗
51. Super-hard refractory high entropy alloy film with spinodal decomposition10.1016/j.jmst.2024.06.028 ↗
52. A comparative X-ray diffraction analysis of Sr2+substituted hydroxyapatite from sand lobster shell waste using various methods10.1016/j.heliyon.2025.e41781 ↗
53. Variations of lattice constants and thermal expansion coefficients of indium at high pressure and high temperature10.1080/08957959.2018.1499903 ↗
54. Instantaneous and residual stresses developed in hot isostatic pressing of metals and ceramics10.1007/BF02661100 ↗
55. The effects of film surface roughness on x-ray diffraction of nonpolar gallium nitride films10.1088/0022-3727/42/13/135407 ↗
56. Microstructure and mechanical properties of W/steel joints diffusion bonded with Nb and Nb/Ni interlayers by spark plasma sintering10.1080/01694243.2020.1781353 ↗
57. Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 62510.1016/j.jmst.2020.10.001 ↗
58. The role of grain size in achieving excellent properties in structural materials10.1016/j.jmrt.2024.04.059 ↗
59. Microstructural and mechanical characterizations of W/CuCrZr and W/steel joints brazed with Cu-22TiH2 filler10.1016/j.jmatprotec.2017.11.056 ↗
60. Microstructural characteristics, mechanical properties and interfacial formation mechanism of tungsten alloy/steel composite structure fabricated by HIP co-sintering10.1016/j.matdes.2021.110127 ↗
61. Achieving enhanced strength and ductility in 316L stainless steel via wire arc additive manufacturing using pulsed arc plasma10.1016/j.msea.2023.144711 ↗
62. Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing10.1016/j.surfcoat.2019.05.079 ↗
63. Microstructure and strengthening mechanisms of 90W–7Ni–3Fe alloys prepared using laser melting deposition10.1016/j.jallcom.2020.155545 ↗
64. Effect of hot isostatic pressing process parameters on properties and fracture behavior of tungsten alloy powders and sintered bars10.3390/ma15238647 ↗