Bio-inspired involute groove pad textures for enhanced material removal and surface quality in SiC chemical mechanical polishing

1. Approaches to sustainability in chemical mechanical polishing (CMP): a review10.1007/s40684-021-00406-8 ↗

2. Origins of wear-induced tungsten corrosion defects in semiconductor manufacturing during tungsten chemical mechanical polishing10.1016/j.apsusc.2022.153767 ↗

3. Modeling and simulation for the distribution of slurry particles in chemical mechanical polishing10.1007/s00170-014-6132-9 ↗

4. Polishing performance and material removal mechanism in the solid-phase fenton reaction based polishing process of SiC wafer using diamond gel disc10.1016/j.jmatprotec.2024.118486 ↗

5. Investigation of green alkaline pH regulators on sapphire UV-CMP10.1016/j.triboint.2022.108047 ↗

6. Temperature distribution in polishing pad during CMP process: effect of retaining ring10.1007/s12541-012-0004-8 ↗

7. Machine vision-based recognition of elastic abrasive tool wear and its influence on machining performance10.1007/s10845-023-02256-4 ↗

8. Compound mechanical and chemical-mechanical polishing processing technique for single-crystal silicon carbide10.1016/j.precisioneng.2023.12.002 ↗

9. Precision and ultra-precision machining with elastic polishing tools: a review10.1007/s44251-024-00071-4 ↗

10. Design of surface grooves on a polishing pad based on slurry uniform flow10.1007/s00170-019-04026-0 ↗

11. Analyses and experimental confirmation of removal performance of silicon oxide film in the chemical–mechanical polishing (CMP) process with pattern geometry of concentric groove pads10.1016/j.wear.2010.10.057 ↗

12. Jeong · 2025

13. Research on composite pattern design and lapping performance of fixed abrasive pads controlled by multi-physical fields10.1016/j.precisioneng.2024.08.015 ↗

14. Retention and interfacial failure mechanism of single diamond grains in resin-bonded grinding tools10.1016/j.diamond.2024.111681 ↗

15. A numerical study on slurry flow with CMP pad grooves10.1016/j.mee.2020.111437 ↗

16. Study on geometrical patterns of textured fixed-abrasive pads in sapphire lapping based on trajectory analysis10.1016/j.precisioneng.2018.03.008 ↗

17. Distribution of polishing times for a wafer with different patterned polishing pads during CMP and CCMP10.1016/j.surfcoat.2010.01.051 ↗

18. Effect of groove pattern of chemical mechanical polishing pad on slurry flow behavior10.1143/JJAP.51.05EF03 ↗

19. Effect of pad groove geometry on material removal characteristics in chemical mechanical polishing10.1007/s12541-012-0038-y ↗

20. Design and evaluation of pad grooves for copper CMP

21. Design and experimental study of double-pattern nonuniform coupling fixed-abrasive pads

22. Effect of radial grooves pads on copper chemical mechanical polishing10.1016/j.mssp.2022.106968 ↗

23. Mean residence time and removal rate studies in ILD CMP10.1149/1.1731539 ↗

24. Levenspiel O, Wiley. Chemical reaction engineering. New York. 578 pages. https://sc.panda985.com/extdomains/books.google.com/books/about/Chemical_Reaction_Engineering.html?hl=zh-CN&id=vw48EAAAQBAJ (accessed July 22, 2024).

25. Investigation of abrasive behavior between pad asperity and oxide thin film in chemical mechanical planarization10.1016/j.mssp.2021.106280 ↗

26. Study on the groove geometry of pad in water dissolution polishing of soft brittle materials based on trajectory analysis10.1016/j.precisioneng.2024.09.017 ↗

27. On the relationship of CMP wafer nanotopography to groove-scale slurry transport10.1557/PROC-867-W5.7 ↗

28. Morphological structure design and performance research of planar abrasive tools based on bionics of ruminant molar teeth

29. Modification of the Preston equation for the chemical–mechanical polishing of copper10.1016/S0040-6090(98)00896-7 ↗

30. A material removal model for CMP based on the contact mechanics of pad, abrasives, and wafer10.1149/1.3231691 ↗

31. Effect of pad groove width on slurry mean residence time and slurry utilization efficiency in CMP10.1016/j.mee.2016.02.035 ↗