Experimental Investigation of Shear Strength Parameters of Rubber-Coated Ballast

1. 10.1016/j.enggeo.2022.10678610.1016/j.enggeo.2022.106786 ↗

2. 10.1007/s11440-021-01342-210.1007/s11440-021-01342-2 ↗

3. ASTM. 1997. Standard test method for clay lumps and friable particles in aggregates. ASTM C142: 1997. West Conshohocken PA: ASTM.

4. ASTM. 2001. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39: 2001. West Conshohocken PA: ASTM.

5. ASTM. 2009. Standard test method for bulk density (‘unit weight’) and voids in aggregate. ASTM C29: 2009. West Conshohocken PA: ASTM.

6. ASTM. 2010. Standard test method for elastic moduli of intact rock core specimens in uniaxial compression. ASTM D3148: 2010. West Conshohocken PA: ASTM.

7. ASTM. 2011. Direct shear test. ASTM D3080: 2011. West Conshohocken PA: ASTM.

8. ASTM. 2012a. Standard test method for density relative density (specific gravity) and absorption of coarse aggregate. ASTM C127: 2012. West Conshohocken PA: ASTM.

9. ASTM. 2012b. Standard test method for resistance to degradation of large-size coarse aggregate by abrasion and impact in the Los Angeles machine. ASTM C535: 2012. West Conshohocken PA: ASTM.

10. ASTM. 2013. Standard test method for materials finer than 75-μm (No. 200) sieve in mineral aggregates by washing. ASTM C117: 2013. West Conshohocken PA: ASTM.

11. ASTM. 2018. Standard test method for flash and fire points by Cleveland open cup tester. ASTM D92: 2018. West Conshohocken PA: ASTM.

12. Australian Standard. 1996. Aggregates and rock for engineering purposes. AS 2758.7: 1996. Sydney Australia: Australian Standard.

13. BSI (British Standards Institution). 2000. Method for determination of particle shape. BS EN 812-105: 2000. London: BSI.

14. Danesh, A., M. Palassi, and A. A. Mirghasemi. 2018. “Effect of sand and clay fouling on the shear strength of railway ballast for different ballast gradations.” Granular Matter 20 (Aug): 1–14. https://doi.org/10.1007/s10035-018-0824-z.10.1007/s10035-018-0824-z ↗

15. 10.1016/j.conbuildmat.2021.12610610.1016/j.conbuildmat.2021.126106 ↗

16. 10.1016/j.conbuildmat.2022.12749110.1016/j.conbuildmat.2022.127491 ↗

17. 10.1016/j.soildyn.2020.10626510.1016/j.soildyn.2020.106265 ↗

18. 10.1177/168781401664024510.1177/1687814016640245 ↗

19. 10.1061/(ASCE)MT.1943-5533.000170210.1061/(ASCE)MT.1943-5533.0001702 ↗

20. 10.1016/j.trpro.2016.05.15110.1016/j.trpro.2016.05.151 ↗

21. Ghahremani, S., J.-A. Zakeri, F. Samimi, M. M. Rad, R. E. Mehni, M. Esmaeili, and F. Astaraki. 2022. “Ballast stabilization with polyurethane for use in desert areas.” Period. Polytech., Civ. Eng. 66 (3): 853–865. https://doi.org/10.3311/PPci.19968.

22. 10.1016/j.conbuildmat.2018.11.28410.1016/j.conbuildmat.2018.11.284 ↗

23. 10.3390/su1207283610.3390/su12072836 ↗

24. 10.1016/j.conbuildmat.2019.03.31510.1016/j.conbuildmat.2019.03.315 ↗

25. 10.1016/j.proeng.2016.06.10310.1016/j.proeng.2016.06.103 ↗

26. 10.1016/j.conbuildmat.2011.11.04710.1016/j.conbuildmat.2011.11.047 ↗

27. 10.1680/tgasm.2013910.1680/tgasm.20139 ↗

28. Sol-Sánchez, M., F. Moreno-Navarro, M. Rubio-Gámez, N. Manzo, and V. Fontseré. 2018. “Full-scale study of Neoballast section for its application in railway tracks: Optimization of track design.” Mater. Struct. 51 (Apr): 1–11. https://doi.org/10.1617/s11527-018-1167-2.10.1617/s11527-018-1167-2 ↗

29. 10.1016/j.conbuildmat.2014.10.04510.1016/j.conbuildmat.2014.10.045 ↗

30. 10.1177/036119811983934510.1177/0361198119839345 ↗

31. 10.1680/jgeen.17.0010710.1680/jgeen.17.00107 ↗

32. Tutumluer E. W. Dombrow and H. Huang. 2008. “Laboratory characterization of coal dust fouled ballast behavior.” In Proc. AREMA 2008 Annual Conf. & Exposition. Lanham MD: American Railway Engineering and Maintenance-of-Way Association.

33. 10.3390/pr908133110.3390/pr9081331 ↗

34. 10.1016/j.conbuildmat.2023.13097510.1016/j.conbuildmat.2023.130975 ↗