Mechanical Behavior in Concrete with Recycled Glass Fiber Powder Using a Finite Element Numerical Model
Source abstract
Abstract
Abstract Waste management and the second-life utilization of components have attracted significant interest over the past few decades. This study examines the mechanical behavior of concrete modified with recycled wind turbine blade (RWTB) powder used as a partial supplementary material. COMSOL Multiphysics was employed to simulate the response of the modified concrete under loading, using a linear elastic material model. The model investigates the initial mechanical performance and stress distribution. Key mechanical properties have been compared with available experimental literature; however, different powder properties and preparation methods are considered. The results indicate that incorporating small percentages of RWTB powder can improve certain mechanical characteristics, such as stress distribution efficiency, stiffness, and elastic strain energy capacity. The mechanical behavior as an indicative response has been presented. This trend confirms the existence of an optimal powder content that enhances structural performance. In addition, the work underscores the environmental value of integrating RWTB powder into concrete, supporting waste reduction and circular economy practices. The non-linear relationship between the related parameters has been confirmed.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. L. Mishnaevsky, K. Branner, H. Petersen, J. Beauson, M. McGugan, and B. Sørensen, Materials for Wind Turbine Blades: An Overview, Materials, 2017, 10(11), p 1285. https://doi.org/10.3390/ma1011128510.3390/ma10111285 ↗
2. A. Hasheminezhad, Z. Nazari, B. Yang, H. Ceylan, and S. Kim, A Comprehensive Review of Sustainable Solutions for Reusing Wind Turbine Blade Waste Materials, J. Environ. Manage., 2024, 366, p 121735. https://doi.org/10.1016/j.jenvman.2024.12173510.1016/j.jenvman.2024.121735 ↗
3. B. Zhou, M. Zhang, G. Ma, and R. Zhang, Evaluation of Mechanical Properties, Durability, and Sustainability of Concrete Reinforced with Recycled GFRP Fibers: Experiments and Optimization, J. Build. Eng., 2025, 111, p 113111. https://doi.org/10.1016/j.jobe.2025.11311110.1016/j.jobe.2025.113111 ↗
4. V. Revilla-Cuesta, A.B. Espinosa, R. Serrano-López, M. Skaf, and J.M. Manso, Mechanical Properties of Concrete Mixes with Selectively Crushed Wind Turbine Blade: Comparison with Raw-Crushing, Materials, 2024, 17(24), p 6299. https://doi.org/10.3390/ma1724629910.3390/ma17246299 ↗
5. C. Wang, J. Xiao, W. Liu, and Z. Ma, Unloading and reloading Stress-Strain Relationship of Recycled Aggregate Concrete Reinforced with Steel/Polypropylene Fibers Under Uniaxial Low-Cycle Loadings, Cem. Concr. Compos., 2022, 131, p 104597. https://doi.org/10.1016/j.cemconcomp.2022.10459710.1016/j.cemconcomp.2022.104597 ↗
6. C. Wang, J. Guo, F. Li, Y. Zhang, and Z. Ma, Characterization of Failure Modes and Mechanical Behavior of Micro-Fiber-Reinforced Recycled Aggregate Concrete Under Hopkinson Pressure Bar and in-situ CT Techniques, Constr. Build. Mater., 2025, 458, p 139726. https://doi.org/10.1016/j.conbuildmat.2024.13972610.1016/j.conbuildmat.2024.139726 ↗
7. A. Saribiyik and G. Gurbuz, Department of Civil Engineering, Sakarya University of Applied Sciences, Sakarya (Turkey), “Effects of Glass Fiber Reinforced Polymer Pipe Waste Powder Usage on Concrete Properties,” Rev. Constr., 2021, 20(3), p 463–478. https://doi.org/10.7764/RDLC.20.3.46310.7764/RDLC.20.3.463 ↗
8. M. Priyanka, V. D. Sri, and P. Student, “Experimental Study on Combined Effect of Glass Powder and Glass Fibres as Partial Replacement of Fine Aggregates and Concrete,” 9(10), (2021)
9. T. Zhao et al., Effect of Glass Fiber-Reinforced Plastic Waste on the Mechanical Properties of Concrete and Evaluation of Its Feasibility for Reuse in Concrete Applications, Materials, 2023, 16(20), p 6772. https://doi.org/10.3390/ma1620677210.3390/ma16206772 ↗
10. M.W. Kaboré et al., Insights into the Effect of Recycled Glass Fiber Reinforced Polymer on the Mechanical Strengths of Cement Mortar, Eng, 2024, 5(4), p 2966–2977. https://doi.org/10.3390/eng504015410.3390/eng5040154 ↗
11. F.-F. Gao, S.-Y. Duan, W.-D. Wang, and Y.-L. Shi, Mechanical Properties and Microscopic Mechanism of Concrete Incorporation of Recycled GFRP Fiber with Different Sizes Recovered from Ex-Service Wind Turbine Blades, Constr. Build. Mater., 2025, 491, p 142833. https://doi.org/10.1016/j.conbuildmat.2025.14283310.1016/j.conbuildmat.2025.142833 ↗
12. P.K. Mehta, Concrete: microstructure, properties, and materials, 4th ed. McGraw-Hill’s AccessEngineering, New York McGraw-Hill, 2014.
13. M. Thomas, Supplementary cementing materials in concrete, CRC Press, 2013.10.1201/b14493 ↗
14. COMSOL Multiphysics® v. 6.4. COMSOL AB, Stockholm, Sweden.
15. W. Kępys, B. Tora, V. Václavík, and J. Jaskowska-Lemańska, The Effect of Recycled Wind Turbine Blade GFRP on the Mechanical and Durability Properties of Concrete, Sustainability, 2025, 17(18), p 8201. https://doi.org/10.3390/su1718820110.3390/su17188201 ↗
16. J. Wang, C. Wang, Y. Ji, R. Qie, D. Wang, and G. Liu, Mechanical Properties and Microscopic Study of Recycled Fibre Concrete Based on Wind Turbine Blades, Materials, 2024, 17(14), p 3565. https://doi.org/10.3390/ma1714356510.3390/ma17143565 ↗
17. V. Revilla-Cuesta, J. Manso-Morato, N. Hurtado-Alonso, M. Skaf, and V. Ortega-López, Mechanical and Environmental Advantages of the Revaluation of Raw-Crushed Wind-Turbine Blades as a Concrete Component, J. Build. Eng., 2024, 82, p 108383. https://doi.org/10.1016/j.jobe.2023.10838310.1016/j.jobe.2023.108383 ↗
18. P. Asokan, M. Osmani, and A. Price, Improvement of the Mechanical Properties of Glass Fibre Reinforced Plastic Waste Powder Filled Concrete, Constr. Build. Mater., 2010, 24(4), p 448–460. https://doi.org/10.1016/j.conbuildmat.2009.10.01710.1016/j.conbuildmat.2009.10.017 ↗
19. J. Wang, C. Zheng, L. Mo, H. GangaRao, and R. Liang, Assessment of Recycling Use of GFRP Powder as Replacement of Fly Ash in Geopolymer Paste and Concrete at Ambient and High Temperatures, Ceram. Int., 2022, 48(10), p 14076–14090. https://doi.org/10.1016/j.ceramint.2022.01.29310.1016/j.ceramint.2022.01.293 ↗