Tribocorrosion Behavior of AISI 304 Stainless Steels for Different Friction Pairs in 0.5 mol/L H2SO4

1. H. Wu, Y. Li, Y. Lu, Z. Li, X.W. Cheng, M. Hasan, H.M. Zhang, and Z.Y. Jiang, Influences of Load and Microstructure on Tribocorrosion Behaviour of High Strength Hull Steel in Saline Solution, Tribol. Lett., 2019. https://doi.org/10.1007/s11249-019-1237-910.1007/s11249-019-1237-9 ↗

2. Z. Dai, M. Liu, S. Jiang, M. Li, S. Li, and D. Duan, Effects of Different Cathodic Reactions on Tribocorrosion Behavior of AISI 430 in 0.5 mol/L Sulfuric Acid, J. Mater. Eng. Perform., 2022, 31(4), p 2708–2714. https://doi.org/10.1007/s11665-021-06342-710.1007/s11665-021-06342-7 ↗

3. Y.X. Qiao, S. Wang, B. Liu, Y.G. Zheng, H.B. Li, and Z.H. Jiang, Synergistic Effect of Corrosion and Cavitation Erosion of High Nitrogen Stainless Steel, Acta Metall. Sin., 2016, 52(2), p 233–240.

4. S. Bao, L. Zhang, H. Peng, Q. Fan, and Y. Wen, Effects of Heat Treatment on Martensitic Transformation and Wear Resistance of as-cast 60NiTi Alloy, Mater. Res. Express, 2019, 6(8), 086573. https://doi.org/10.1088/2053-1591/ab1b7a10.1088/2053-1591/ab1b7a ↗

5. J. Perret, E. Boehm-Courjault, M. Cantoni, S. Mischler, A. Beaudouin, W. Chitty, and J.P. Vernot, EBSD SEM and FIB Characterisation of Subsurface Deformation during Tribocorrosion of Stainless Steel in Sulphuric Acid, Wear, 2010, 269(5–6), p 383–393. https://doi.org/10.1016/j.wear.2010.04.02310.1016/j.wear.2010.04.023 ↗

6. A. Stachowiak and W. Zwierzycki, Tribocorrosion Modeling of Stainless Steel in a Sliding Pair of Pin-on-Plate Type, Tribol. Int., 2011, 44(10), p 1216–1224. https://doi.org/10.1016/j.triboint.2011.05.02010.1016/j.triboint.2011.05.020 ↗

7. A. Stachowiak, P. Tyczewski, and W. Zwierzycki, The Application of Wear Maps for Analyzing the Results of Research into Tribocorrosion, Wear, 2016, 352–353, p 146–154. https://doi.org/10.1016/j.wear.2016.02.00910.1016/j.wear.2016.02.009 ↗

8. A. Stachowiak and W. Zwierzycki, Analysis of the Tribocorrosion Mechanisms in a Pin-on-Plate Combination on the Example of AISI304 Steel, Wear, 2012, 294–295, p 277–285. https://doi.org/10.1016/j.wear.2012.07.01310.1016/j.wear.2012.07.013 ↗

9. Y. Zhang, J.Z. Wang, X.Y. Yin, and F.Y. Yan, Tribocorrosion Behaviour of 304 Stainless Steel in Different Corrosive Solutions, Mater. Corros., 2016, 67(7), p 769–777. https://doi.org/10.1002/maco.20150864110.1002/maco.201508641 ↗

10. M. Liu, D.L. Duan, S.L. Jiang, and M.Y. Li, Tribocorrosion Behavior of 304 Stainless Steel in 0.5 mol/L Sulfuric Acid, Acta Metall. Sin. Engl. Lett., 2018, 31(10), p 1049–1058. https://doi.org/10.1007/s40195-018-0773-x10.1007/s40195-018-0773-x ↗

11. P.J. Blau, J.-P. Celis, and D. Drees, Tribo-Corrosion: Research, Testing, and Applications, ASTM International, 2013.10.1520/STP1563-EB ↗

12. F. Lou, Z. Ma, S. Nie, H. Ji, and F. Yin, A Bidirectional Wear Model Based on Inverse Gaussian (IG) Process for PEEK against AISI630 Stainless Steel in Seawater Hydraulic Components, Tribol. Int., 2022, 175, 107815. https://doi.org/10.1016/j.triboint.2022.10781510.1016/j.triboint.2022.107815 ↗

13. Z. Guan, D. Wu, Q. Cheng, Z. Wang, M. Tang, and Y. Liu, Friction and Wear Characteristics of CF/PEEK Against 431 Stainless Steel under High Hydrostatic Pressure Water Lubrication, Mater. Des., 2020, 196, 109057. https://doi.org/10.1016/j.matdes.2020.10905710.1016/j.matdes.2020.109057 ↗

14. J. Zhang, J. Liu, Z. Wang, W. Chen, B. Hu, Y. Zhang, H. Liao, and S. Ma, Tribological Behavior and Lubricating Mechanism of Si3N4 in Artificial Seawater, Ceram. Int., 2020, 46(10, Part A), p 14361–14368. https://doi.org/10.1016/j.ceramint.2020.02.17110.1016/j.ceramint.2020.02.171 ↗

15. N. Liu, J. Wang, B. Chen, and F. Yan, Tribochemical Aspects of Silicon Nitride Ceramic Sliding Against Stainless Steel under the Lubrication of Seawater, Tribol. Int., 2013, 61, p 205–213. https://doi.org/10.1016/j.triboint.2013.01.01110.1016/j.triboint.2013.01.011 ↗

16. G.B. Olson and M.A. Cohen, Stress-Assisted Isothermal Martensitic Transformation: Application to TRIP Steels, Metall. Trans. A, 1982, 13, p 1907–1914.10.1007/BF02645934 ↗

17. G.L. Huang, D. Matlock, and G. Krauss, Martensite Formation, Strain Rate Sensitivity, and Deformation Behavior of Type 304 Stainless Steel Sheet, Metall. Trans. A, 1989, 20, p 1239–1246.10.1007/BF02647406 ↗

18. B. Mao, S. Chu, and S. Wang, Effect of Grain Size on the Friction-Induced Martensitic Transformation and Tribological Properties of 304 Austenite Stainless Steel, Metals, 2020, 10, 1246.10.3390/met10091246 ↗

19. Z. Dai, S. Jiang, B. Wu, L. Ning, S. Li, and D. Duan, Synergism between Wear and Corrosion of Cr26Mo1 Ferrite Stainless Steels in 0.5 mol/L of Sulfuric Acid, Tribol. Int., 2023, 178, 108007.10.1016/j.triboint.2022.108007 ↗

20. G. Tatsumi, M. Ratoi, Y. Shitara, S. Hasegawa, K. Sakamoto, and B.G. Mellor, Mechanism of Oil-Lubrication of PEEK and Its Composites with Steel Counterparts, Wear, 2021, 486–487, 204085. https://doi.org/10.1016/j.wear.2021.20408510.1016/j.wear.2021.204085 ↗

21. H. Kong, H.-G. Han, E.-S. Yoon, O.-K. Kwon, and N.K. Myshkin, Evaluation of the Wear Life of MoS2-Bonded-Films in Tribo-Testers with Different Contact Configuration, Wear, 1998, 215(1), p 25–33. https://doi.org/10.1016/S0043-1648(97)00288-310.1016/S0043-1648(97)00288-3 ↗

22. N.K. Myshkin, M.I. Petrokovets, and A.V. Kovalev, Tribology of Polymers: Adhesion, Friction, Wear, and Mass-Transfer, Tribol. Int., 2005, 38(11), p 910–921. https://doi.org/10.1016/j.triboint.2005.07.01610.1016/j.triboint.2005.07.016 ↗

23. S.-W. Zhang, Tribology of Elastomers, Elsevier, 2004.

24. G. Liu, L. Zhang, G. Li, F. Zhao, and G. Zhang, BN–SiC Ensembles to Form Tribofilm with Excellent Shielding Effects in PEEK- Stainless Steel Contacts for Artificial Joint, Tribol. Int., 2021, 156, 106834. https://doi.org/10.1016/j.triboint.2020.10683410.1016/j.triboint.2020.106834 ↗

25. S. Zhiqiang, Z. Di, and L. Guobin, Evaluation of Dry Sliding Wear Behavior of Silicon Particles Reinforced Aluminum Matrix Composites, Mater. Des., 2005, 26(5), p 454–458. https://doi.org/10.1016/j.matdes.2004.07.02610.1016/j.matdes.2004.07.026 ↗

26. B. Bhushan, Introduction to Tribology, John Wiley & Sons, 2013.10.1002/9781118403259 ↗

27. Y. Qiao, Z. Tian, X. Cai, J. Chen, Y. Wang, Q. Song, and H. Li, Cavitation Erosion Behaviors of a Nickel-Free High-Nitrogen Stainless Steel, Tribol. Lett., 2018, 67(1), p 1–9. https://doi.org/10.1007/s11249-018-1118-710.1007/s11249-018-1118-7 ↗

28. K.L. Johnson, Contact Mechanics, Cambridge University Press, 1987.

29. W. Cai and W.D. Nix, Imperfections in Crystalline Solids, Cambridge University Press, 2016.10.1017/CBO9781316389508 ↗

30. T.H. Courtney, Mechanical Behavior of Materials, Waveland Press, 2005.

31. H. Gao and Y. Huang, Geometrically Necessary Dislocation and Size-Dependent Plasticity, Scr. Mater., 2003, 48(2), p 113–118. https://doi.org/10.1016/S1359-6462(02)00329-910.1016/S1359-6462(02)00329-9 ↗

32. Y. Ohno, J. Inotani, Y. Kaneko, and S. Hashimoto, Subsurface Microstructure Induced by Sliding Wear in a Copper Single Crystal. In: 6th Pacific Rim International Conference on Advanced Materials and Processing, (Cheju Isl, SOUTH KOREA), 2007, pp. 2407-241010.4028/0-87849-462-6.2407 ↗

33. C. Li, X. Deng and Z. Wang, Friction Behaviour and Self-Lubricating Mechanism of Low Alloy Martensitic Steel during Reciprocating Sliding, Wear, 2021, 482(483), 203972. https://doi.org/10.1016/j.wear.2021.20397210.1016/j.wear.2021.203972 ↗

34. W. Liu, Y.G. Zheng, C.S. Liu, Z.M. Yao, and W. Ke, Cavitation Erosion Behavior of Cr–Mn–N Stainless Steels in Comparison with 0Cr13Ni5Mo Stainless Steel, Wear, 2003, 254(7), p 713–722. https://doi.org/10.1016/S0043-1648(03)00128-510.1016/S0043-1648(03)00128-5 ↗

35. F. Weng, Y. Chew, W.K. Ong, Y. Man, S. Sui, C. Tan, F.L. Ng, M.H. Goh, and G. Bi, Enhanced Corrosion Resistance of Laser Aided Additive Manufactured CoCrNi Medium Entropy Alloys with Oxide Inclusion, Corros. Sci., 2022, 195, 109965. https://doi.org/10.1016/j.corsci.2021.10996510.1016/j.corsci.2021.109965 ↗

36. K.D. Ralston and N. Birbilis, Effect of Grain Size on Corrosion: A Review, Corrosion, 2010, 66(7), p 075005–1. https://doi.org/10.5006/1.346291210.5006/1.3462912 ↗

37. W.S. Labiapari, M.A.N. Ardila, H.L. Costa, and J.D.B. de Mello, Micro Abrasion-Corrosion of Ferritic Stainless Steels, Wear, 2017, 376(377), p 1298–1306. https://doi.org/10.1016/j.wear.2017.01.08310.1016/j.wear.2017.01.083 ↗

38. K. Miyoshi, Studies of Mechanochemical Interactions in the Tribological Behavior of Materials, Surf. Coat. Technol., 1990, 43–4(1–3), p 799–812. https://doi.org/10.1016/0257-8972(90)90022-510.1016/0257-8972(90)90022-5 ↗

39. M. Tian et al., Discovering the Nanoscale Origins of Localized Corrosion in Additive Manufactured Stainless Steel 316L by Liquid Cell Transmission Electron Microscopy, Corros. Sci., 2022, 208, 110659. https://doi.org/10.1016/j.corsci.2022.11065910.1016/j.corsci.2022.110659 ↗

40. V.N. Chuvil’Deev et al., Effect of Severe Plastic Deformation Realized by Rotary Swaging on the Mechanical Properties and Corrosion Resistance of Near-α-Titanium Alloy Ti-2.5 Al-2.6 Zr, J. Alloys. Compd., 2019, 785, p 1233–1244. https://doi.org/10.1016/j.jallcom.2019.01.26810.1016/j.jallcom.2019.01.268 ↗

41. M. Li et al., Stochastic Local Breakdown of Oxide Film on Ni from Identical-Location Imaging: One Single Site at a Time, Nano Lett., 2022, 22(15), p 6313–6319. https://doi.org/10.1021/acs.nanolett.2c0201810.1021/acs.nanolett.2c02018 ↗

42. M. Makuch et al., A Microstructure-Sensitive Electro-Chemo-Mechanical Phase-Field Model of Pitting and Stress Corrosion Cracking, Corros. Sci., 2024, 232, 112031. https://doi.org/10.1016/j.corsci.2024.11203110.1016/j.corsci.2024.112031 ↗