Evolution of Microstructure and Mechanical Properties of a Mg-Gd Alloy during Rolling with Inter-Pass Annealing

1. G. Li, J. Zhang, R. Wu, Y. Feng, S. Liu, X. Wang, Y. Jiao, Q. Yang, and J. Meng, Development of High Mechanical Properties and Moderate Thermal Conductivity Cast Mg Alloy with Multiple RE Via Heat Treatment, J. Mater. Sci. Technol., 2018, 34(7), p 1076–1084.10.1016/j.jmst.2017.12.011 ↗

2. J. Li, Z. He, P. Fu, Y. Wu, L. Peng, and W. Ding, Heat Treatment and Mechanical Properties of a High-Strength Cast Mg-Gd-Zn Alloy, Mater. Sci. Eng. A, 2016, 651, p 745–752.10.1016/j.msea.2015.11.021 ↗

3. P. Cheng, Y. Zhao, R. Lu, H. Hou, Z. Bu, and F. Yan, Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys, Mater. Sci. Eng. A, 2017, 708, p 482–491.10.1016/j.msea.2017.10.006 ↗

4. Y. Gao, Q.D. Wang, J.H. Gu, Y. Zhao, and Y. Tong, Behavior of Mg-15Gd-5Y-0.5Zr Alloy During Solution Heat Treatment from 500 to 540℃, Mater. Sci. Eng. A, 2007, 459(1–2), p 117–123.10.1016/j.msea.2007.01.057 ↗

5. K. Luo, L. Zhang, G. Wu, W. Liu, and W. Ding, Effect of Y and Gd Content on the Microstructure and Mechanical Properties of Mg-Y-RE Alloys, J. Magnes. Alloys, 2019, 7(2), p 345–354.10.1016/j.jma.2019.03.002 ↗

6. Y. Wan, B. Tang, Y. Gao, L. Tang, G. Sha, B. Zhang, N. Liang, C. Liu, S. Jiang, Z. Chen, X. Guo, and Y. Zhao, Bulk Nanocrystalline High-Strength Magnesium Alloys Prepared Via Rotary Swaging, Acta Mater., 2020, 200, p 274–286.10.1016/j.actamat.2020.09.024 ↗

7. Y. Yang, X. Xiong, J. Chen, X. Peng, D. Chen, and F. Pan, Research Advances in Magnesium and Magnesium Alloys Worldwide in 2020, J. Magnesium Alloys, 2023, 11(8), p 2611–2654.10.1016/j.jma.2023.07.011 ↗

8. Q.-k Li, H. Yan, and R.-s Chen, Effect of Rolling Reduction on Deformation Mechanism and Twinning Behavior of WE43 Magnesium Alloy, Trans. Nonferrous Met. Soc. China, 2022, 32(12), p 3901–3913.10.1016/S1003-6326(22)66066-7 ↗

9. R.K. Sabat, P.K. Samal, and M. Ahamed S, Effect of Strain Path on the Evolution of Microstructure, Texture and Tensile Properties of WE43 Alloy, Mater. Sci. Eng. A, 2018, 715, p 348–358.10.1016/j.msea.2018.01.018 ↗

10. B. Li, B. Teng, and E. Wang, Effects of Accumulative Rolling Reduction on the Microstructure Characteristic and Mechanical Properties of Mg-Gd-Y-Zn-Zr Sheets Processed by Hot Rolling, Mater. Sci. Eng. A, 2019, 765, 138317.10.1016/j.msea.2019.138317 ↗

11. J. Sun, B. Li, J. Yuan, X. Li, B. Xu, Z. Yang, J. Han, J. Jiang, G. Wu, and A. Ma, Developing a High-Performance Mg-5.7Gd-1.9Ag Wrought Alloy Via Hot Rolling and Aging, Mater. Sci. Eng. A, 2021, 803, 140707.10.1016/j.msea.2020.140707 ↗

12. S. Wang, J. Ma, J. Yang, W. Zhang, Y. Sun, J. Pan, H. Wang, and W. Chen, Improving the Ductility of Mg-2.5Nd-0.5Zn-0.5Zr Alloy by Multi-Pass Hot Rolling, J. Mater. Res. Technol., 2021, 14, p 2124–2130.10.1016/j.jmrt.2021.07.124 ↗

13. Z.B. Chen, C.M. Liu, H.C. Xiao, J.K. Wang, Z.Y. Chen, S.N. Jiang, and Z.J. Su, Effect of Rolling Passes on the Microstructures and Mechanical Properties of Mg-Gd-Y-Zr Alloy Sheets, Mater. Sci. Eng. A, 2014, 618(nov.17), p 232–237.10.1016/j.msea.2014.09.018 ↗

14. Z. Yan, Y. Yu, Y. Sang, Y. Yao, and J. Qian, Processing of High Strength Mg-9Gd-3Nd-1Sn-1Zn-0.6Zr Alloy by Hot Rolling and Subsequent Aging, Mater. Express, 2020, 10(7), p 1020–1031.10.1166/mex.2020.1716 ↗

15. K. Wang, J. Wang, X. Peng, S. Gao, H. Hu, L. Zeng, and F. Pan, Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Mn Alloy Sheets Processed by Large-Strain High-Efficiency Rolling, Mater. Sci. Eng. A, 2019, 748, p 100–107.10.1016/j.msea.2019.01.080 ↗

16. Y. Liu, N. Long, and D. Zhang, Effects of Hot Rolling Reduction and Intermediate Annealing on Microstructure and Mechanical Properties of Mg-Gd-Y-Zr Plates, J. Alloys Compd., 2025, 1039, 183177.10.1016/j.jallcom.2025.183177 ↗

17. W. Duan, S. Fang, Z. Shao, X. Xu, Y. Dai, J. Lv, and G. Yu, Microstructure and Texture Evolution Characteristics of Mg-6Gd-1Y-0.3Zr Alloy During Multi-pass Hot Rolling, J. Mater. Eng. Perform., 2026 https://doi.org/10.1007/s11665-026-13518-610.1007/s11665-026-13518-6 ↗

18. X. Li, J. Zhao, Z. Zhao, H. Shi, X. Li, C. Xu, X. Hu, and X. Wang, Fabrication of High-Strength and High-Thermal-Conductivity Mg-Zn-Gd-Y Alloy Rolled Sheets Via Synergistic Modulation of Dislocation and Recrystallization, J. Mater. Eng. Perform., 2025, 34(20), p 23817–23832.10.1007/s11665-025-11019-6 ↗

19. K. Wang, X. Wang, C. Dang, P. Zhao, C. Wang, Z. Zhang, M. Liu, and J. Wang, Microstructure Evolution and Mechanical Properties of High-Strength Mg-Gd-Y-Zn-Mn Alloy Processed by Asymmetric Hot Rolling, J. Mater. Res. Technol., 2023, 24, p 2907–2917.10.1016/j.jmrt.2023.03.187 ↗

20. D. Wang, Y. Jing, Y. Gao, J. Li, Y. Shi, and R.D.K. Misra, Enhanced Mechanical Properties of AZ91 Magnesium Alloy by Asynchronously Large-Strain High-Efficiency Rolling with Bimodal Grain Structure, J. Mater. Res. Technol., 2023, 27, p 4430–4439.10.1016/j.jmrt.2023.10.205 ↗

21. Y. Han, S. Chen, Y. Wan, C. Liu, and Z. Chen, Microstructure, Texture Evolution and Mechanical Anisotropy of Mg-Gd-Y-Zn-Zr Alloy Sheets Produced by Unidirectional and Cross Rolling, Mater. Sci. Eng. A, 2024, 893, 146127.10.1016/j.msea.2024.146127 ↗

22. C. Tang, X. Wang, W. Liu, D. Feng, K. Wu, C. Zhang, G. Miao, W. Liang, J. Li, X. Liu, and Q. Li, Effects of Thermomechanical Processing on the Microstructure, Texture and Mechanical Properties of a Mg-Gd-Based Alloy, Mater. Sci. Eng. A, 2019, 759, p 172–180.10.1016/j.msea.2019.05.010 ↗

23. S. Pan, X. Huang, Y. Xin, G. Huang, Q. Li, C. Tan, and Q. Liu, The Effect of Hot Rolling Regime on Texture and Mechanical Properties of an As-Cast Mg-2Zn-2Gd Plate, Mater. Sci. Eng. A, 2018, 731, p 288–295.10.1016/j.msea.2018.06.046 ↗

24. S.M. Fatemi, S. Aliyari, and S.M. Miresmaeili, Dynamic Precipitation and Dynamic Recrystallization During Hot Deformation of a Solutionized WE43 Magnesium Alloy, Mater. Sci. Eng. A, 2019, 762, 138076.10.1016/j.msea.2019.138076 ↗

25. J.P. Hadorn, K. Hantzsche, S.B. Yi, J. Bohlen, D. Letzig, and S.R. Agnew, Effects of Solute and Second-Phase Particles on the Texture of Nd-Containing Mg Alloys, Metall. Mater. Trans. A, 2012, 43A(4), p 1363–1375.10.1007/s11661-011-1018-z ↗

26. S. Tighiouaret, A. Hanna, H. Azzeddine, L. Rabahi, A. Dakhouche, F. Brisset, A.-L. Helbert, T. Baudin, and D. Bradai, On the Evolution of Microstructure, Texture and Corrosion Behavior of a Hot-Rolled and Annealed AZ31 Alloy, Mater. Chem. Phys., 2021, 267, 124598.10.1016/j.matchemphys.2021.124598 ↗

27. X. Yang, Y. Okabe, H. Miura, and T. Sakai, Annealing of a Magnesium Alloy AZ31 After Interrupted Cold Deformation, Mater. Des., 2012, 36, p 626–632.10.1016/j.matdes.2011.12.001 ↗

28. S.W. Lee, S.-H. Kim, and S.H. Park, Microstructural Characteristics of AZ31 Alloys Rolled at Room and Cryogenic Temperatures and their Variation During Annealing, J. Magnesium Alloys, 2020, 8(2), p 537–545.10.1016/j.jma.2020.03.003 ↗