Mechanics of Anisotropic Strain Localization in High-Strength Aluminum Sheets under Uniaxial Tension

1. Y. Xu, X. Zhuang, W. Zhang, Q. Li, and Z. Zhao, Mechanical Behaviors and Microstructure Characteristics of W-Tempered and Peak-Aged 7075 Alloy Sheets under Low Frequency Vibration–Assisted Tension, Mater. Sci. Eng. A, 2021 https://doi.org/10.1016/j.msea.2021.14233810.1016/j.msea.2021.142338 ↗

2. B. Tang, H. Li, N. Guo, H. Zhang, G. Liu, X. Li, and Y. Zuo, Revealing Ductile/Quasi-Cleavage Fracture and DRX-Affected Grain Size Evolution of AA7075 Alloy during Hot Stamping Process, Int. J. Mech. Sci., 2021, 212, p 106843.10.1016/j.ijmecsci.2021.106843 ↗

3. T. Xu, D. Zuo, T. Ye, G. Zhang, and Y. Zhang, Numerical Investigation on Bending Characteristic and Ductile Fracture of AA7075 Thin-Walled Beam using Advanced Orthotropic Plasticity and Fracture Models, Eng. Fail. Anal., 2025, 168, p 109122.10.1016/j.engfailanal.2024.109122 ↗

4. A.A. Benzerga, N. Thomas, and J.S. Herrington, Plastic Flow Anisotropy Drives Shear Fracture, Sci. Rep., 2019, 9, p 1425.10.1038/s41598-018-38437-y ↗

5. B. Revil-Baudard, O. Cazacu, and E. Massoni, Room-Temperature Plastic Behavior and Formability of a Commercially Pure Titanium: Mechanical Characterization, Modeling, and Validation, Int. J. Solids Struct., 2021, 228, p 111121.10.1016/j.ijsolstr.2021.111121 ↗

6. M. Baral, P.W. Ripley, Y. Lou, and Y.P. Korkolis, Anisotropic Ductile Fracture of a Stainless Steel under Biaxial Loading: Experiments and Predictions, Int. J. Plast., 2024, 175, p 103927.10.1016/j.ijplas.2024.103927 ↗

7. X. Yan, Y. Yuan, Y. Zhao, and R. Chen, Rotor Cross-Tilt Optimization for Yaw Control Improvement of Multi-rotor eVTOL Aircraft, Chin. J. Aeronaut., 2024, 37, p 153–167.10.1016/j.cja.2023.09.016 ↗

8. Y. Choi, J. Lee, S.S. Panicker, H.K. Jin, S.K. Panda, and M.G. Lee, Mechanical Properties, Springback, and Formability of W-Temper and Peak Aged 7075 Aluminum Alloy Sheets: Experiments and Modeling, Int. J. Mech. Sci., 2020, 170, p 105344.10.1016/j.ijmecsci.2019.105344 ↗

9. H. Rong, P. Hu, L. Ying, W. Hou, and M. Dai, Modeling the Anisotropic Plasticity and Damage of AA7075 Alloy in Hot Forming, Int. J. Mech. Sci., 2022, 215, p 106951.10.1016/j.ijmecsci.2021.106951 ↗

10. M. Fourmeau, T. Borvik, A. Benallal, O.G. Lademo, and O.S. Hopperstad, On the Plastic Anisotropy of an Aluminium Alloy and its Influence on Constrained Multiaxial Flow, Int. J. Plast., 2011, 27, p 2005–2025.10.1016/j.ijplas.2011.05.017 ↗

11. R. Esmaeilpour, H. Kim, T. Park, F. Pourboghrat, Z. Xu, B. Mohammed, and F. Abu-Farha, Calibration of Barlat Yld 2004-18P Yield Function using CPFEM and 3D RVE for the Simulation of Single Point Incremental Forming (SPIF) of 7075-O Aluminum Sheet, Int. J. Mech. Sci., 2018, 145, p 24–41.10.1016/j.ijmecsci.2018.05.015 ↗

12. S.A. Nazari Tiji, T. Park, A. Asgharzadeh, H. Kim, M. Athale, J.H. Kim, and F. Pourboghrat, Characterization of Yield Stress Surface and Strain-Rate Potential for Tubular Materials using Multiaxial Tube Expansion Test Method, Int. J. Plast., 2020, 133, p 102838.10.1016/j.ijplas.2020.102838 ↗

13. T. Rahmaan, J. Noder, A. Abedini, P. Zhou, C. Butcher, and M.J. Worswick, Anisotropic Plasticity Characterization of 6000- and 7000-Series Aluminum Sheet Alloys at Various Strain Rates, Int. J. Impact Eng, 2020, 135, p 103390.10.1016/j.ijimpeng.2019.103390 ↗

14. Y. Choi, J. Ha, M.-G. Lee, and Y.P. Korkolis, Effect of Plastic Anisotropy and Portevin-Le Chatelier Bands on Hole-Expansion in AA7075 Sheets in -T6 and -W Tempers, J. Mater. Process. Technol., 2021, 296, p 117211.10.1016/j.jmatprotec.2021.117211 ↗

15. R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proc. R. Soc. Lond. A, 1948, 193, p 281–297.10.1098/rspa.1948.0045 ↗

16. F. Barlat and K. Lian, Plastic Behavior and Stretchability of Sheet Metals. Part I: A Yield Function for Orthotropic Sheets under Plane Stress Conditions, Int. J. Plast., 1989, 5, p 51–66.10.1016/0749-6419(89)90019-3 ↗

17. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourgoghrat, S.H. Choi, and E. Chu, Plane Stress Yield Function for Aluminum Alloy Sheets—Part 1: Theory, Int. J. Plast., 2003, 19, p 1297–1319.10.1016/S0749-6419(02)00019-0 ↗

18. F. Barlat, H. Aretz, J.W. Yoon, M.E. Karabin, J.C. Brem, and R.E. Dick, Linear Transfomation-Based Anisotropic Yield Functions, Int. J. Plast., 2005, 21, p 1009–1039.10.1016/j.ijplas.2004.06.004 ↗

19. Y.S. Lou and J.W. Yoon, Anisotropic Yield Function Based on Stress Invariants for BCC and FCC Metals and its Extension to Ductile Fracture Criterion, Int. J. Plast., 2018, 101, p 125–155.10.1016/j.ijplas.2017.10.012 ↗

20. Y. Lou and J.W. Yoon, Lode-Dependent Anisotropic-Asymmetric Yield Function for Isotropic and Anisotropic Hardening of Pressure-Insensitive Materials. Part I: Quadratic Function under Non-associated Flow Rule, Int. J. Plast., 2023, 166, p 103647.10.1016/j.ijplas.2023.103647 ↗

21. W. Julsri, A. Sanrutsadakorn, and V. Uthaisangsuk, An Integrated Experimental–Numerical Approach for Characterizing Deformation Behavior of High-Strength Steels, J. Metals Mater. Miner., 2026, 36, e2518.10.55713/jmmm.v36i2.2518 ↗

22. S. Panich and C. Amree, Ductile Fracture Criteria Assessment on AA2024-T3 Aluminum Alloys Sheet using Digital Image Correlation Technique and Analytical Calculation, J. Strain Anal. Eng. Des., 2026, 61, p 93–110.10.1177/03093247251387970 ↗

23. T. Jantarasricha, K. Chongbunwatana, and S. Panich, Comparative Study of Fracture Criteria through Bona Fide Experimental–Numerical Examinations on AA2024-T3, Int. J. Adv. Manuf. Technol., 2022, 119, p 7685–7710.10.1007/s00170-022-08742-y ↗

24. T. Jantarasricha, K. Chongbunwatana, and S. Panich, Fracture Analysis of Sheet Aluminum Alloy AA2024-T3 through a Complex-Loading Cross-Die Test, Int. J. Appl. Mech., 2023, 15, p 2250093.10.1142/S1758825122500934 ↗

25. A. Nakwattanaset, S. Panich, and S. Suranuntchai, Formability Prediction of High-Strength Steel Sheet using Experimental, Analytical and Theoretical Analysis Based on Strain and Stress Forming Limit Curves and its Application to Automotive Forming Parts, Materialwiss. Werkstofftech., 2023, 54, p 1122–1137.10.1002/mawe.202200323 ↗

26. S. Panich, W. Polpruk, and V. Uthaisangsuk, Comparative Wrinkle Assessments for Cup Drawing of Aluminum Alloy Sheets by Analytical, Experimental and Numerical Approaches, Int. J. Adv. Manuf. Technol., 2026, 142, p 4821–4847.10.1007/s00170-025-17330-9 ↗

27. S. Panich and V. Uthaisangsuk, Wrinkling Limit Curves with Consideration of Anisotropic Behaviour for the Deep Drawing of Aluminium Sheet Alloys, Proc. Ins. Mech. Eng. Part L: J. Mater. Des. Appl., 2023, 237, p 592–615.

28. H. Aretz and F. Barlat, New Convex Yield Functions for Orthotropic Metal Plasticity, Int. J. Non-Linear Mech., 2013, 51, p 97–111.10.1016/j.ijnonlinmec.2012.12.007 ↗

29. N. Hosseini and J.A. Rodríguez-Martínez, A Simple and Computationally Efficient Stress Integration Scheme Based on Numerical Approximation of the Yield Function Gradients: Application to Advanced Yield Criteria, Finite Elem. Anal. Des., 2021, 192, p 103538.10.1016/j.finel.2021.103538 ↗

30. S. Panich, J. Sawangpan, and A. Khantachawana, Enhancement of Mechanical Forming Properties Related in Formability for AA2024-T3 Sheet using Shot Peening Process, Int. J. Lightweight Mater. Manuf., 2026 https://doi.org/10.1016/j.ijlmm.2026.01.00710.1016/j.ijlmm.2026.01.007 ↗

31. C. Amree, T. Jantarasricha, and S. Panich, Formability and Fracture Prediction using Polar Effective Plastic Strains and Fracture Loci with Application in Multi-step Forming Processes, Int. J. Adv. Manuf. Technol., 2025, 140, p 3099–3141.10.1007/s00170-025-16425-7 ↗

32. J.C. Stinville, M.A. Charpagne, R. Maass, H. Proudhon, W. Ludwig, P.G. Callahan, F. Wang, I.J. Beyerlein, M.P. Echlin, and T.M. Pollock, Insights into Plastic Localization by Crystallographic Slip from Emerging Experimental and Numerical Approaches, Annu. Rev. Mater. Res., 2023, 53, p 275–317.10.1146/annurev-matsci-080921-102621 ↗

33. A. Needleman and V. Tvergaard, Analyses of Plastic Flow Localization in Metals, Appl. Mech. Rev., 1992, 45, p 3–18.10.1115/1.3121390 ↗

34. N. Yan, Z. Li, Y. Xu, and M.A. Meyers, Shear Localization in Metallic Materials at High Strain Rates, Prog. Mater. Sci., 2021, 119, p 100755.10.1016/j.pmatsci.2020.100755 ↗

35. R. Hill, On Discontinuous Plastic States, with Special Reference to Localized Necking in Thin Sheets, J. Mech. Phys. Solids, 1952, 1, p 19–30.10.1016/0022-5096(52)90003-3 ↗

36. R. Hill and J.W. Hutchinson, Bifurcation Phenomena in the Plane Tension Test, J. Mech. Phys. Solids, 1975, 23, p 239–264.10.1016/0022-5096(75)90027-7 ↗

37. J.R. Rice, Plane Strain Slip Line Theory for Anisotropic Rigid/Plastic Materials, J. Mech. Phys. Solids, 1973, 21, p 63–74.10.1016/0022-5096(73)90030-6 ↗

38. M.K. Neilsen and H.L. Schreyer, Bifurcations in Elastic-Plastic Materials, Int. J. Solids Struct., 1993, 30, p 521–544.10.1016/0020-7683(93)90185-A ↗

39. V. Tvergaard, A. Needleman, and K.K. Lo, Flow Localization in the Plane Strain Tensile Test, J. Mech. Phys. Solids, 1981, 29, p 115–142.10.1016/0022-5096(81)90019-3 ↗

40. S.D. Antolovich and R.W. Armstrong, Plastic Strain Localization in Metals: Origins and Consequences, Prog. Mater. Sci., 2014, 59, p 1–160.10.1016/j.pmatsci.2013.06.001 ↗

41. M. Cervera, J.-Y. Wu, S. Kim, and M. Chiumenti, On the Mechanics of Strain Localization in Plasticity: Isotropic and Orthotropic, Elasto- and Rigid-Plastic, Associated and Non-associated Models, Acta Mech., 2022, 233, p 1513–1542.10.1007/s00707-022-03184-9 ↗

42. F. Körber and H. Hoff, Ueber die Festigkeitseigenschaften und den Reisswinkel kaltgewalzter Metalle, Mitteilungen aus dem Kaiser-Wilhelm-Institut für Eisenforschung zu Düsseldorf. Verlag Stahleisen, 1928, p 175–189

43. A.M. Habraken, Modelling the Plastic Anisotropy of Metals, Arch. Comput. Methods Eng., 2004, 11, p 3–96.10.1007/BF02736210 ↗

44. R. Hill, On the Mechanics of Localized Necking in Anisotropic Sheet Metals, J. Mech. Phys. Solids, 2001, 49, p 2055–2070.10.1016/S0022-5096(01)00031-X ↗

45. L. Corallo, B. Revil-Baudard, O. Cazacu, and P. Verleysen, Role of Anisotropy on Strain Localization at High-Strain Rates in Ti6Al4V, Eur. J. Mech. A. Solids, 2023, 97, p 104856.10.1016/j.euromechsol.2022.104856 ↗

46. O. Cazacu and J.A. Rodríguez-Martínez, Effects of Plastic Anisotropy on Localization in Orthotropic Materials: New Explicit Expressions for the Orientation of Localization Bands in Flat Specimens Subjected to Uniaxial Tension, J. Mech. Phys. Solids, 2019, 126, p 272–284.10.1016/j.jmps.2019.03.002 ↗

47. T. Xu, F. Li, and X. Wang, A User-Friendly Anisotropic Yield Function for Modeling Anisotropy of BCC and FCC Sheet Metals, J. Mater. Eng. Perform., 2023, 32, p 2370–2391.10.1007/s11665-022-07275-5 ↗

48. T. Xu, F. Li, X. Wang, and G. Zhang, Characterization of Anisotropic Fracture Behavior of 7075-T6 Aluminum Alloy Sheet under Various Stress States, J. Mater. Eng. Perform., 2023, 32, p 3230–3252.

49. J.W. Yoon, Y. Lou, J. Yoon, and M.V. Glazoff, Asymmetric Yield Function Based on the Stress Invariants for Pressure Sensitive Metals, Int. J. Plast., 2014, 56, p 184–202.10.1016/j.ijplas.2013.11.008 ↗

50. M. Cervera, J.-Y. Wu, M. Chiumenti, and S. Kim, Strain Localization Analysis of Hill’s Orthotropic Elastoplasticity: Analytical Results and Numerical Verification, Comput. Mech., 2020, 65, p 533–554.10.1007/s00466-019-01782-4 ↗

51. E. Daxin, Y. Wang, W. Zhang, and Z. Fan, Research on the Effect of the Derived Transverse Stress during Instability Processes in the Sheet Metal’s Uniaxial Tensile Test, J. Alloys Compd., 2018, 748, p 418–429.10.1016/j.jallcom.2018.03.144 ↗

52. R. Hill, Theoretical Plasticity of Textured Aggregates, Math. Proc. Cambridge Philos. Soc., 1979, 85, p 179–191.10.1017/S0305004100055596 ↗

53. N. Park, H. Huh, and J.W. Yoon, Anisotropic Fracture Forming Limit Diagram Considering Non-directionality of the Equi-Biaxial Fracture Strain, Int. J. Solids Struct., 2018, 151, p 181–194.10.1016/j.ijsolstr.2018.01.009 ↗

54. N. Park, H. Huh, S.J. Lim, Y.S. Lou, Y.S. Kang, and M.H. Seo, Fracture-Based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming, Int. J. Plast., 2017, 96, p 1–35.10.1016/j.ijplas.2016.04.014 ↗

55. N. Hosseini, J.C. Nieto-Fuentes, M. Dakshinamurthy, J.A. Rodríguez-Martínez, and G. Vadillo, The Effect of Material Orientation on Void Growth, Int. J. Plast., 2022, 148, p 103149.10.1016/j.ijplas.2021.103149 ↗

56. K.E. N’souglo, J.A. Rodríguez-Martínez, A. Vaz-Romero, and O. Cazacu, The Combined Effect of Plastic Orthotropy and Tension-Compression Asymmetry on the Development of Necking Instabilities in Flat Tensile Specimens Subjected to Dynamic Loading, Int. J. Solids Struct., 2019, 159, p 272–288.10.1016/j.ijsolstr.2018.10.006 ↗

57. N. Srinivasan, R. Velmurugan, L.K. Bhaskar, S.K. Singh, B. Pant, and R. Kumar, The Role of Brass Texture on the Deformation Response of 7075-T651 Aluminum Alloy under Equi-Biaxial Tension, Mater. Sci. Eng. A, 2021, 812, p 141133.10.1016/j.msea.2021.141133 ↗

58. R. Hill, Constitutive Dual Potentials in Classical Plasticity, J. Mech. Phys. Solids, 1987, 35, p 23–33.10.1016/0022-5096(87)90025-1 ↗

59. T. Kuwabara, T. Mori, M. Asano, T. Hakoyama, and F. Barlat, Material Modeling of 6016-O and 6016-T4 Aluminum Alloy Sheets and Application to Hole Expansion Forming Simulation, Int. J. Plast., 2017, 93, p 164–186.10.1016/j.ijplas.2016.10.002 ↗

60. A. Brosius, N. Küsters, and M. Lenzen, New Method for Stress Determination Based on Digital Image Correlation Data, CIRP Ann., 2018, 67, p 269–272.10.1016/j.cirp.2018.04.026 ↗

61. C. Butcher and A. Abedini, On Anisotropic Plasticity Models using Linear Transformations on the Deviatoric Stress: Physical Constraints on Plastic Flow in Generalized Plane Strain, Int. J. Mech. Sci., 2019, 161, p 105044.10.1016/j.ijmecsci.2019.105044 ↗

62. J. Ha, M.G. Lee, and F. Barlat, Strain Hardening Response and Modeling of EDDQ and DP780 Steel Sheet under Non-linear Strain Path, Mech. Mater., 2013, 64, p 11–26.10.1016/j.mechmat.2013.04.004 ↗

63. P. Lequeu, P. Gilormini, F. Montheillet, B. Bacroix, and J.J. Jonas, Yield Surfaces for Textured Polycrystals—II. Analytical Approach, Acta Metall., 1987, 35, p 1159–1174.10.1016/0001-6160(87)90063-0 ↗

64. M. Rabahallah, T. Balan, S. Bouvier, B. Bacroix, F. Barlat, K. Chung, and C. Teodosiu, Parameter Identification of Advanced Plastic Strain Rate Potentials and Impact on Plastic Anisotropy Prediction, Int. J. Plast., 2009, 25, p 491–512.10.1016/j.ijplas.2008.03.006 ↗

65. F. Barlat, K. Chung, and O. Richmond, Strain Rate Potential for Metals and its Application to Minimum Plastic Work Path Calculations, Int. J. Plast., 1993, 9, p 51–63.10.1016/0749-6419(93)90013-G ↗

66. D. Kim, F. Barlat, S. Bouvier, M. Rabahallah, T. Balan, and K. Chung, Non-quadratic Anisotropic Potentials Based on Linear Transformation of Plastic Strain Rate, Int. J. Plast., 2007, 23, p 1380–1399.10.1016/j.ijplas.2007.01.006 ↗

67. J.-Y. Wu and M. Cervera, A Thermodynamically Consistent Plastic-Damage Framework for Localized Failure in Quasi-Brittle Solids: Material Model and Strain Localization Analysis, Int. J. Solids Struct., 2016, 88–89, p 227–247.10.1016/j.ijsolstr.2016.03.005 ↗

68. P. Bésuelle and J.W. Rudnicki, Chapter 5 ▸ - Localization: Shear Bands and Compaction Bands, International Geophysics. Y. Guéguen, M. Boutéca Ed., Academic Press, 2004, p 219–321

69. G. Han, J. He, S. Li, and Z. Lin, Simple Shear Methodology for Local Structure–Property Relationships of Sheet Metals: State-of-the-Art and Open Issues, Prog. Mater. Sci., 2024, 143, p 101266.10.1016/j.pmatsci.2024.101266 ↗

70. G. Han, J. He, and S. Li, Simple Shear Deformation of Sheet Metals: Finite Strain Perturbation Analysis and High-Resolution Quasi-In-Situ Strain Measurement, Int. J. Plast., 2022, 150, p 103194.10.1016/j.ijplas.2021.103194 ↗

71. Q. Xie, K. Feng, W. Wang, J. Zhu, S. Yin, M. Liu, X. Yan, and J. Lian, Correlation Between Macroscopic Necking and Microscopic Kink Bands during Quasi-Static Tension for a Selective Laser Melted β-Ti Alloy, Mater. Sci. Eng. A, 2025, 920, p 147550.10.1016/j.msea.2024.147550 ↗

72. C. Li, E. Daxin, and N. Yi, Analysis on Fracture Initiation and Fracture Angle in Ductile Sheet Metal under Uniaxial Tension by Experiments and Finite Element Simulations, J. Mater. Res., 2016, 31, p 3991–3999.10.1557/jmr.2016.412 ↗

73. Y.S. Lou, S.J. Zhang, and J.W. Yoon, Strength Modeling of Sheet Metals from Shear to Plane Strain Tension, Int. J. Plast., 2020, 134, p 102813.10.1016/j.ijplas.2020.102813 ↗

74. Z. Yang, C. Zhao, G. Dong, and Z. Chen, Experimental Calibration of Ductile Fracture Parameters and Forming Limit of AA7075-T6 Sheet, J. Mater. Process. Technol., 2021, 291, p 117044.10.1016/j.jmatprotec.2021.117044 ↗

75. J.-H. Kim, H.-N. Choi, K.-J. Lee, J.-h Shin, N.-h Seo, J.-G. Jung, S.-J. Lee, and S.-J. Lee, Effect of Welding Speed on Microstructural Evolution and Strengthening Mechanism of Friction-Stir Welded 7075 Aluminum, Mater. Sci. Eng. A, 2024, 908, p 146695.10.1016/j.msea.2024.146695 ↗

76. H. Kim, H. Choi, J. Oh, S. Lee, H. Kwon, E.S. Park, S. Lee, G.-D. Lee, M. Kim, and H.N. Han, Elucidating the Role of a Unique Step-Like Interfacial Structure of η4 Precipitates in Al-Zn-Mg Alloy, Sci. Adv., 2023, 9, p eadf7426.10.1126/sciadv.adf7426 ↗

77. O. Cazacu, N. Chandola, B. Revil-Baudard, B.H. Frodal, T. Børvik, and O.S. Hopperstad, Modeling the Effect of Notch Geometry on the Deformation of a Strongly Anisotropic Aluminum Alloy, Eur. J. Mech. A. Solids, 2020, 82, p 104004.10.1016/j.euromechsol.2020.104004 ↗

78. H. Traphöner, T. Clausmeyer, and A.E. Tekkaya, Methods for Measuring Large Shear Strains in In-Plane Torsion Tests, J. Mater. Process. Technol., 2021, 287, p 116516.10.1016/j.jmatprotec.2019.116516 ↗

79. Y. Lou and H. Huh, Prediction of Ductile Fracture for Advanced High Strength Steel with a New Criterion: Experiments and Simulation, J. Mater. Process. Technol., 2013, 213, p 1284–1302.10.1016/j.jmatprotec.2013.03.001 ↗

80. F. Khameneh, A. Abedini, and C. Butcher, Lengthscale Effects in Optical Strain Measurement for Fracture Characterization in Simple Shear, Int. J. Fract., 2021, 232, p 153–180.10.1007/s10704-021-00598-9 ↗

81. B. Jordan, V. Grolleau, and D. Mohr, Using Surround DIC to Extract True Stress–Strain Curve from Uniaxial Tension Experiments, Int. J. Solids Struct., 2023, 268, p 112171.10.1016/j.ijsolstr.2023.112171 ↗

82. R. Hill, The Mathematical Theory of Plasticity, Oxford University Press, 1998.10.1093/oso/9780198503675.001.0001 ↗

83. F. Barlat, S. Panchanadeeswaran, and O. Richmond, Earing in Cup Drawing Face-Centered Cubic Single Crystals and Polycrystals, Metall. Trans. A, 1991, 22, p 1525–1534.10.1007/BF02667366 ↗

84. J.W. Yoon, R.E. Dick, and F. Barlat, A New Analytical Theory for Earing Generated from Anisotropic Plasticity, Int. J. Plast., 2011, 27, p 1165–1184.10.1016/j.ijplas.2011.01.002 ↗

85. H. Aretz and O. Engler, Accuracy Analysis of Earing Compensation Procedures, Int. J. Solids Struct., 2020, 191, p 418–433.10.1016/j.ijsolstr.2020.01.007 ↗

86. H. Aretz and O. Engler, Accuracy Assessment of Analytical Earing Models, Eur. J. Mech. A. Solids, 2019, 78, p 103839.10.1016/j.euromechsol.2019.103839 ↗