Parametric Study on Vibration Analysis and Surface Roughness of Fused Deposition Modeling-Printed Parts under Multi-material Dampers for Additive Manufacturing Applications

1. I. Gibson, D. Rosen and B. Stucker, Additive Manufacturing Technologies, 3rd ed. Springer, 2021.10.1007/978-3-030-56127-7 ↗

2. K. Rajan, M. Samykano, K. Kadirgama et al., Fused Deposition Modeling: Process, Materials, Parameters, Properties, and Applications, Int. J. Adv. Manuf. Technol., 2022, 120, p 1531–1570. https://doi.org/10.1007/s00170-022-08860-710.1007/s00170-022-08860-7 ↗

3. A. Cano-Vicent, M.M. Tambuwala, S.S. Hassan, D. Barh, A.A.A. Aljabali, M. Birkett, A. Arjunan and Á. Serrano-Aroca, Fused Deposition Modelling: Current Status, Methodology, Applications and Future Prospects, Addit. Manuf., 2021, 47, p 102378. https://doi.org/10.1016/j.addma.2021.10237810.1016/j.addma.2021.102378 ↗

4. M. Montez, K. Willis, H. Rendler, C. Marshall, E. Rubio, D.K. Rajak, M.H. Rahman, and P.L. Menezes, Fused Deposition Modeling (FDM): Processes, Material Properties, and Applications, Tribology of Additively Manufactured Materials: Fundamentals, Modeling, and Applications. P.L. Menezes, M. Nosonovsky, S.P. Ingole, S.V. Kailas Ed., Elsevier Series on Tribology and Surface Engineering, 2022, p 137–163. https://doi.org/10.1016/B978-0-12-821328-5.00005-610.1016/B978-0-12-821328-5.00005-6 ↗

5. M.J. Lin and D.R. Li, In Situ Optical Monitoring for Geometric Accuracy and Error Detection in Extrusion-Based Additive Manufacturing, Int. J. Adv. Manuf. Technol., 2025, 139, p 1791–1814. https://doi.org/10.1007/s00170-025-15988-910.1007/s00170-025-15988-9 ↗

6. Q. Zhang, J. Wang, Z. Zhao et al., Evaluation of Open-Source Robotic-Assisted Additive Manufacturing Equipment for Additively Manufactured Three-Dimensional Curved Structure, Sci. Rep., 2026 https://doi.org/10.1038/s41598-026-46136-210.1038/s41598-026-46136-2 ↗

7. G. Phan, Advanced Quality Assessment and Damage Monitoring in 3D-Printed Plastic and Composite Beams Using Machine Learning, Prog. Addit. Manuf., 2026, 11, p 3169–3206. https://doi.org/10.1007/s40964-025-01514-610.1007/s40964-025-01514-6 ↗

8. C.-F. Bănică, A. Sover and D.-C. Anghel, Printing the Future Layer by Layer: A Comprehensive Exploration of Additive Manufacturing in the Era of Industry 4.0, Appl. Sci., 2024, 14(21), p 9919. https://doi.org/10.3390/app1421991910.3390/app14219919 ↗

9. I. Fidan, O. Huseynov, M.A. Ali, S. Alkunte, M. Rajeshirke, A. Gupta, S. Hasanov, K. Tantawi, E. Yasa, O. Yilmaz et al., Recent Inventions in Additive Manufacturing: Holistic Review, Inventions, 2023, 8, p 103.10.3390/inventions8040103 ↗

10. R. Mishra, W.B. Powers and K. Kate, Comparative Study of Vibration Signatures of FDM 3D Printers, Prog. Addit. Manuf., 2023, 8, p 205–209. https://doi.org/10.1007/s40964-022-00323-510.1007/s40964-022-00323-5 ↗

11. M. Baechle-Clayton, E. Loos, M. Taheri and H. Taheri, Failures and Flaws in Fused Deposition Modeling (FDM) Additively Manufactured Polymers and Composites, J. Compos. Sci., 2022, 6(7), p 202. https://doi.org/10.3390/jcs607020210.3390/jcs6070202 ↗

12. F. Alhadar, A. Kessentini, H. Jamhour et al., Mechanical Properties Investigations of PLA Products Made by FDM under Controlled Vibration, J. Mech. Sci. Technol., 2025, 39, p 4009–4016. https://doi.org/10.1007/s12206-025-0624-410.1007/s12206-025-0624-4 ↗

13. A.G. Pereira, G.F. Barbosa, M.G. Filho, S.B. Shiki and ALd. Silva, Quality Control in Extrusion-Based Additive Manufacturing: A Review of Machine Learning Approaches, IEEE Trans. Cybern., 2025, 55(6), p 2522–2534. https://doi.org/10.1109/TCYB.2025.355851510.1109/TCYB.2025.3558515 ↗

14. A. Isiani, K. Crittenden, L. Weiss, O. Odirachukwu, R. Jha, O. Johnson and O. Abika, In-Situ Monitoring and Process Control in Material Extrusion Additive Manufacturing: A Comprehensive Review, J. Exp. Theor. Anal., 2025, 3(3), p 21. https://doi.org/10.3390/jeta303002110.3390/jeta3030021 ↗

15. S.C. Ekerer, C. Boğa, M. Seyedzavvar, T. Koroglu and T. Farsadi, Optimizing Parameters for Additive Manufacturing: A Study on the Vibrational Performance of 3D Printed Cantilever Beams Using Material Extrusion, Rapid Prototyp. J., 2025, 31(1), p 218–230. https://doi.org/10.1108/RPJ-03-2024-014610.1108/RPJ-03-2024-0146 ↗

16. R. Chand, V.S. Sharma, R. Trehan et al., Investigating the Dimensional Accuracy and Surface Roughness for 3D Printed Parts Using a Multi-jet Printer, J. Mater. Eng. Perform., 2023, 32, p 1145–1159. https://doi.org/10.1007/s11665-022-07153-010.1007/s11665-022-07153-0 ↗

17. A.P. Golhin, R. Tonello, J.R. Frisvad et al., Surface Roughness of As-Printed Polymers: A Comprehensive Review, Int. J. Adv. Manuf. Technol., 2023, 127, p 987–1043. https://doi.org/10.1007/s00170-023-11566-z10.1007/s00170-023-11566-z ↗

18. J. Jedelský, M. Malý, M. Bělka, A. Polzer, V. Sámelová, O. Cejpek and G. Wigley, Effect of Fabrication Method and Surface Roughness on Spray Characteristics for Small Pressure-Swirl Atomizers, J. Manuf. Process., 2023, 85, p 166–178. https://doi.org/10.1016/j.jmapro.2022.11.03110.1016/j.jmapro.2022.11.031 ↗

19. M. Ren, P. He, X. Xie and Z. Zhang, Active/Passive Vibration Isolation With Multi-axis Transmission Control: Analysis and Experiment, J. Vib. Control, 2023, 29(21–22), p 5090–5106. https://doi.org/10.1177/1077546322113091910.1177/10775463221130919 ↗

20. R. Zu, W. Chen, Y. Huang, Y. Chen, C. Du, Q. Fan, H. Li and H. Liu, Tailor-Made 3D Printing TPU/PLA Composites for Damping and Energy Absorption, Mater. Des., 2025 https://doi.org/10.1016/j.matdes.2025.11375210.1016/j.matdes.2025.113752 ↗

21. F. Xue, H. Boudaoud, G. Robin, F.A. Cruz Sanchez and E.M. Daya, Enhancing Vibration Damping Properties of Additively Manufactured Viscoelastic Structures through Process Parameter Optimization, Mech. Adv. Mater. Struct., 2024, 31(25), p 7515–7525. https://doi.org/10.1080/15376494.2023.224582710.1080/15376494.2023.2245827 ↗

22. C. Kreide, E. Koricho and K. Kardel, Energy Absorption of 3D Printed Multi-material Elastic Lattice Structures, Prog. Addit. Manuf., 2023, 9(6), p 1653–1665.10.1007/s40964-023-00529-1 ↗

23. M. Palmieri, G. Zucca, G. Morettini, L. Landi and F. Cianetti, Vibration Fatigue of FDM 3D Printed Structures: The Use of Frequency Domain Approach, Materials, 2022, 15(3), p 854. https://doi.org/10.3390/ma1503085410.3390/ma15030854 ↗

24. M. M. Islam, S. Bosak, K. A. Al Goni, T. B. A. Akib, and A. T. Ritu, Design and Implementation of a Cost-Effective & Low Power Consuming 3D Printer with Reduced Vibration of Printing Bed. 2024 IEEE International Women in Engineering (WIE) Conference on Electrical and Computer Engineering (WIECON-ECE), Chennai, India, 077–082 2024 https://doi.org/10.1109/WIECON-ECE64149.2024.10915071.10.1109/WIECON-ECE64149.2024.10915071 ↗

25. J. Ramos-Grez, M. Sen and M. Ramos-Cahis, Theoretical Study of the Interactions Between Vibrations of Large Numbers of FDM 3D Printers, Prog. Addit. Manuf., 2024, 9, p 135–149. https://doi.org/10.1007/s40964-023-00438-310.1007/s40964-023-00438-3 ↗

26. Z. Gou, S. Zhang, W. Zhu, T. Zhang, J. Yan, J. Fei, Q. Fu and H. Li, Improving Friction Vibration and Noise Characteristics of Carbon Fiber-Reinforced Resin Composites by Utilizing Polyurethane’s Enhanced Damping Capacity, Compos. Commun., 2025, 57, p 102492. https://doi.org/10.1016/j.coco.2025.10249210.1016/j.coco.2025.102492 ↗

27. D. Rodríguez-Flores, H. Cervantes-Culebro, J.E. Chong-Quero and C.A. Cruz-Villar, Flexible Joints Performance Assessment of Additive Manufacturing FDM 3D Printed TPU, PLoS ONE, 2025, 20(11), p e0336401. https://doi.org/10.1371/journal.pone.033640110.1371/journal.pone.0336401 ↗

28. S.M. Desai, R.Y. Sonawane and A.P. More, Thermoplastic Polyurethane for Three-Dimensional Printing Applications: A Review, Polym. Adv. Technol., 2023, 34(7), p 2061–2082. https://doi.org/10.1002/pat.604110.1002/pat.6041 ↗

29. B.B. Fraj and Z. Ahmed, Thermal, Structural, and Mechanical Properties of Carbon Fiber Reinforced PLA Composites: Influence of FDM Print Speed and Comprehensive Analysis, Polym. Compos., 2025, 46(18), p 17229–17239. https://doi.org/10.1002/pc.7010710.1002/pc.70107 ↗

30. L. Emmanual, V.R.S. Narayanan, G. Mukesh et al., Evaluation of Complaint Damper for Assessing Its Effectiveness and Efficiency through the Utilization of Topology Optimization, Interactions, 2024, 245, p 305. https://doi.org/10.1007/s10751-024-02154-y10.1007/s10751-024-02154-y ↗

31. A. Yadav, B.P. Prakash, K.S. Dileep, S.A. Rao and G.B.V. Kumar, An Experimental Examination on Surface Finish of FDM 3D Printed Parts, Mater. Today Proc., 2024 https://doi.org/10.1016/j.matpr.2023.07.08810.1016/j.matpr.2023.07.088 ↗

32. D.A. Rade, R. Pirk, I. Regiani, R.A.S. Moreira, M.F. Oliveira and L.M.R. Machado, Design of Improved Viscoelastic Dampers Exploring 3D Printing Technology, Mech. Syst. Signal Process., 2025, 237, p 112923. https://doi.org/10.1016/j.ymssp.2025.11292310.1016/j.ymssp.2025.112923 ↗

33. J. Xu, S. Chen, T. Yuan, T. Guo and A. Li, Investigation into the Dynamic Characteristics and Energy Dissipation Mechanism of an Additively Manufactured Dual-Phase Lattice Metamaterial Damper (DLMD), Eng. Struct., 2026, 352, p 122123. https://doi.org/10.1016/j.engstruct.2026.12212310.1016/j.engstruct.2026.122123 ↗

34. K. Ouazzani, M. El Jai, I. Akhrif et al., An Experimental Study of FDM Parameter Effects on ABS Surface Quality: Roughness Analysis, Int. J. Adv. Manuf. Technol., 2023, 127, p 151–178. https://doi.org/10.1007/s00170-023-11435-910.1007/s00170-023-11435-9 ↗

35. K. Yadav, S. Rohilla, A. Ali et al., Effect of Speed, Acceleration, and Jerk on Surface Roughness of FDM-Fabricated Parts, J. Mater. Eng. Perform., 2024, 33, p 6998–7007. https://doi.org/10.1007/s11665-023-08476-210.1007/s11665-023-08476-2 ↗

36. M. Charekhli-Inanllo, M. Mohammadimehr and F. Bargozini, Buckling and Vibration Analysis of Composite Sandwich Structures with Various Shape Cores Manufactured by FDM: Theoretical and Experimental Results, Prog. Addit. Manuf., 2025, 10, p 8321–8343. https://doi.org/10.1007/s40964-025-01121-510.1007/s40964-025-01121-5 ↗

37. M. Kam, H. Saruhan and A. İpekçi, Experimental Investigation of Vibration Damping Capabilities of 3D Printed Metal/Polymer Composite Sleeve Bearings, J. Thermoplast. Compos. Mater., 2023, 36(6), p 2505–2522. https://doi.org/10.1177/0892705722109498410.1177/08927057221094984 ↗

38. E. Taşcıoğlu, Ö. Kıtay, A.Ö. Keskin et al., Effect of Printing Parameters and Post-process on Surface Roughness and Dimensional Deviation of PLA Parts Fabricated by Extrusion-Based 3D Printing, J. Braz. Soc. Mech. Sci. Eng., 2022, 44, p 139. https://doi.org/10.1007/s40430-022-03429-710.1007/s40430-022-03429-7 ↗