Comprehensive Evaluation of Double-Wire Narrow Gap GMAW Process and Dissimilar Joint for Chute Structure
Source abstract
Abstract
Abstract Chute structures are critical components for transporting mined coal in coal machinery, and their manufacturing involves welding dissimilar thick-plate materials. To achieve efficient and high-quality fabrication of chute structures, double-wire narrow gap gas metal arc welding (GMAW) was utilized to join 40-mm-thick wear-resistant steel NM450 and cast steel ZG30SiMn. A comprehensive evaluation was conducted on the welding process, microstructure, and mechanical properties of the welded joint. Additionally, temperature field simulations were performed to investigate the impact of multi-layer welding thermal cycles on microstructural evolution. The double-wire narrow gap GMAW process demonstrated high stability, yielding a defect-free welded joint. The weld metal (WM) microstructure comprised proeutectoid ferrite, polygonal ferrite, and acicular ferrite, which endowed the WM with better ductility and toughness. Due to the welding-induced multiple thermal cycles, a white band formed between filling layers. In the heat-affected zone (HAZ), the microstructure consisted of martensite and bainite, achieving higher strength and 86-110% toughness values of the base metals. This study successfully implemented double-wire narrow gap GMAW for chute fabrication, enabling high-quality welding of thick-plate dissimilar joint while enhancing welding efficiency without compromising performance. The findings provide actionable insights for optimizing chute manufacturing in heavy machinery industries.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. J. Zhang, D. Cheng, J. Wang, S. Yang, X. Wan, and X. Li Improving recovery in sublevel top coal caving mining by using partially reverse drawing technique. Int. J. Min. Sci. Technol. 2024.10.1016/j.ijmst.2024.11.010 ↗
2. Q. Hao, R. Zhang, M. Gao, J. Xie, L. Ren, A. Zhang, M. Wang, and Z. Zhang, Characterization of Energy-Driven Damage Mechanism and Gas Seepage in Coal Under Mining-Induced Stress Conditions, Int. J. Rock Mech. Min. Sci., 2024, 181, 105834.10.1016/j.ijrmms.2024.105834 ↗
3. Z. Shi and Z. Zhu, Case Study: Wear Analysis of the Middle Plate of a Heavy-Load Scraper Conveyor Chute under a Range of Operating Conditions, Wear, 2017, 380–381, p 36–41.10.1016/j.wear.2017.03.005 ↗
4. J. Li, Z. Zhu, Y. Peng, and G. Shen, Microstructure and Wear Characteristics of Novel Fe-Ni Matrix Wear-Resistant Composites on the Middle Chute of the Scraper Conveyor, J. Mater. Res. Technol., 2020, 9(1), p 935–947.10.1016/j.jmrt.2019.11.033 ↗
5. A. Wang, X. Cheng, G. Meng, L. Wo, and Z. Pang, Experimental Study on the Welding Procedure of the Central Groove of Armored Face Conveyor, Adv. Mech. Eng., 2016 https://doi.org/10.1177/168781401667410110.1177/1687814016674101 ↗
6. A.B. Ozturan, G. Irsel, and B.N. Guezey Study of the Microstructure and Mechanical Property Relationships of Gas Metal Arc Welded Dissimilar Hardox 450 and S355J2C+N Steel Joints. Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 2022, 856.10.1016/j.msea.2022.143486 ↗
7. V. Sharma and A.S. Shahi, Effect of Groove Design on Mechanical and Metallurgical Properties of Quenched and Tempered Low Alloy Abrasion Resistant Steel Welded Joints, Mater. Des., 2014, 53, p 727–736.10.1016/j.matdes.2013.07.043 ↗
8. Z. Gao, Z.R. Chen, Y.H. Wu, J.T. Niu, and J. Brnic, Structure and Properties of Welded Joint of High-Strength Wear-Resistant Steel NM360, Mater. Sci. Technol., 2016, 32(4), p 299–302.10.1080/02670836.2015.1126425 ↗
9. Y. Han, J. Chu, Q. Wang, K. Fu, H. Jin, and Y. Wei, Investigation of Microstructure, Mechanical Properties, Residual Stress, and Distortion in Multi-pass Gas Metal Arc Welding of ZGMn13Mo/a514 Dissimilar Joints, Mater. Chem. Phys., 2025 https://doi.org/10.1016/j.matchemphys.2025.13094110.1016/j.matchemphys.2025.130941 ↗
10. P.K. Taraphdar, R. Kumar, A. Giri, C. Pandey, M.M. Mahapatra, and K. Sridhar, Residual Stress Distribution in Thick Double-V Butt Welds with Varying Groove Configuration, Restraints and Mechanical Tensioning, J. Manuf. Process., 2021, 68, p 1405–1417.10.1016/j.jmapro.2021.06.046 ↗
11. Y. Shin, C. Jung, S. Bae, G. An, M. Son, and Y. Park Characteristics of Microstructure and Fracture Toughness According to the Groove Shape of Submerged Arc Welding. Metals 2025, 15(1).10.3390/met15010010 ↗
12. F. Li, Y. Liu, H. Kong, H. Ren, Y. Tao, Q. Zhang, and Q. Sun, Insight on Microstructure and Mechanical Properties of 40 mm Thick-Walled Ferromagnetic Super-MSS by Magnetic-Field-Assisted Narrow Gap GTAW, J. Mater. Res. Technol., 2023, 24, p 5805–5822.10.1016/j.jmrt.2023.04.117 ↗
13. L. Xia, J. Zhou, R. Xue, X. Li, and H. Liu, Real-Time Seam Tracking During Narrow Gap GMAW Process Based on the Wide Dynamic Vision Sensing Method, J. Manuf. Process., 2023, 101, p 820–834.10.1016/j.jmapro.2023.06.045 ↗
14. G. Zhang, Y. Shi, M. Zhu, and D. Fan, Arc Characteristics and Metal Transfer Behavior in Narrow Gap Gas Metal Arc Welding Process, J. Mater. Process. Technol., 2017, 245, p 15–23.10.1016/j.jmatprotec.2017.02.006 ↗
15. P.H.G. Dornelas, J.D.C. Payão Filho, F.W.C. Farias, V.H.P. Moraes E Oliveira, D.D.O. Moraes, and P. Zumpano Júnior, Influence of the Interpass Temperature on the Microstructure and Mechanical Properties of the Weld Metal (AWS a5.18 ER70S-6) of a Narrow Gap Welded API 5L X70 Pipe Joint, Int. J. Press. Vessels Piping, 2022, 199, 104690.10.1016/j.ijpvp.2022.104690 ↗
16. Z. Ni, B. Dong, Y. Li, X. Cai, and S. Lin, Effects of Processing Parameters on Molten Behavior, Arc Stability, and Defect Forming in Swing-Arc Narrow Gap GMA Vertical Up Welding, J. Mater. Process. Technol., 2023, 321, 118155.10.1016/j.jmatprotec.2023.118155 ↗
17. Z. Yang, Y. Chen, Z. Zhang, C. Fang, K. Xu, P. He, and Z. Zhang, Research on the Sidewall Penetration Mechanisms of Cable-Type Welding Wire Narrow Gap GMAW Process, Int. J. Adv. Manuf. Technol., 2022, 120(3–4), p 2443–2455.10.1007/s00170-022-08866-1 ↗
18. J. Huang, H. Chen, J. He, S. Yu, W. Pan, and D. Fan, Narrow Gap Applications of Swing TIG-MIG Hybrid Weldings, J. Mater. Process. Technol., 2019, 271, p 609–614.10.1016/j.jmatprotec.2019.04.043 ↗
19. J. Wang, Y. Jiang, J. Zhu, D. Liu, G. Xu, and W. Li, Development of Swing Arc Narrow Gap GMAW Process Assisted by Swaying Wire, J. Mater. Process. Technol., 2023, 318, 118004.10.1016/j.jmatprotec.2023.118004 ↗
20. H. Kong, Y. Liu, F. Li, H. Ren, C. Song, K. Kang, and Q. Sun, In-Situ Fabrication of Martensitic Stainless Steel Via Heterogeneous Double-Wire Arc-Directed Energy Deposition, Virtual Phys. Prototyping, 2024 https://doi.org/10.1080/17452759.2024.235061010.1080/17452759.2024.2350610 ↗
21. H. Kong, Y. Liu, H. Ren, F. Li, K. Kang, Y. Tao, and Q. Sun, Surface Modification of Mild Steel Via Heterogeneous double-Wire Arc Directed Energy Deposition: Microstructure and Performance of Cladding Layer, Surf. Coat. Technol., 2024, 482, 130751.10.1016/j.surfcoat.2024.130751 ↗
22. L.F. Scalet Rossini, R.A. Valenzuela Reyes, and J.E. Spinelli, Double-Wire Tandem GMAW Welding Process of HSLA50 Steel, J. Manuf. Process., 2019, 45, p 227–233.10.1016/j.jmapro.2019.07.004 ↗
23. D.H. Kam, T.H. Lee, D.Y. Kim, J. Kim, and M. Kang, Weld Quality Improvement and Porosity Reduction Mechanism of Zinc Coated Steel Using Tandem Gas Metal Arc Welding (GMAW), J. Mater. Process. Technol., 2021, 294, 117127.10.1016/j.jmatprotec.2021.117127 ↗
24. S. Han, J. Li, C. Shao, H. Cui, and X. Tang, Numerical Evaluation of Interwire Angle Influence on Molten Pool Fluid Dynamics and Weld Defects in Tandem NG-GMAW of 5083 Aluminum Alloy, J. Manuf. Process., 2024, 124, p 1112–1123.10.1016/j.jmapro.2024.07.005 ↗
25. X. Cai, C. Fan, S. Lin, C. Yang, X. Ji, and L. Hu, Effects of Shielding Gas Composition on Arc Characteristics and Droplet Transfer in Tandem Narrow Gap GMA Welding, Sci. Technol. Weld. Join., 2017, 22(5), p 446–453.10.1080/13621718.2016.1253535 ↗
26. W. Zhou, J. Yue, S. Liu, P. Zhong, H. Zhou, and Z. Wang, Research on Fusion Regulation Mechanism of Dissimilar Steel Welds Based on Compound Magnetic Field, Int. J. Press. Vessels Piping, 2025 https://doi.org/10.1016/j.ijpvp.2025.10546410.1016/j.ijpvp.2025.105464 ↗
27. C. Lee and K. Chang, Temperature Fields and Residual Stress Distributions in Dissimilar Steel Butt Welds Between Carbon and Stainless Steels, Appl. Therm. Eng., 2012, 45, p 33–41.10.1016/j.applthermaleng.2012.04.007 ↗
28. N. Xiao, H. Kong, Q. Sun, and N. Ma, Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel, Materials, 2024, 17(24), 6183.10.3390/ma17246183 ↗
29. W. Zhang, X. Shang, S. Chen, and L. Zhang, Comparison of Microstructural Characteristics and Mechanical Properties of the High-Strength Low-Alloy Steels Fabricated by Wire Arc Additive Manufacturing Versus Conventional Casting, Mater. Sci. Eng. A, 2023, 885, 145593.10.1016/j.msea.2023.145593 ↗
30. A. Babu, A. Ebrahimi, K. Wu, I.M. Richardson, and M.J.M. Hermans, Local Control of Microstructure and Mechanical Properties of High-Strength Steel in Electric Arc-Based Additive Manufacturing, J. Mater. Res. Technol., 2023, 26, p 1508–1526.10.1016/j.jmrt.2023.07.262 ↗
31. Y. Zhang, Z. Liu, Y. Wang, Z. Chen, H. Liu, and X. Wang Study On Microstructure and Sliding Wear Behavior of Similar and Dissimilar Welded Joints Produced by Laser-Arc Hybrid Welding of Wear-Resistant Steels. Wear 2025, 562.10.1016/j.wear.2024.205643 ↗
32. Q. Zhang, L. You, Y. Yu, Z. Chen, W. Wang, M. Anyakin, and J. Yao, Preparation of Bainite Phase Microstructure by Laser-Electromagnetic Induction Hybrid Solid-State Phase Transformation, J. Mater. Res. Technol., 2024, 33, p 526–534.10.1016/j.jmrt.2024.08.135 ↗
33. M. Darivandpour, R. Dehmolaei, K. Ranjbar, and H. Naseri, Selecting the Appropriate Filler Metal to Join HSLA-100 Steel by Gas Tungsten Arc Welding Process, J. Mater. Eng. Perform., 2023, 32(23), p 10503–10513.10.1007/s11665-023-07887-5 ↗
34. S. Lv, H. Wu, K. Wang, S. Wang, G. Wu, J. Gao, X. Yang, J. Zhu, and X. Mao, The Microstructure Evolution and Influence Factors of Acicular Ferrite in Low Alloy Steels, Comput. Mater. Sci., 2023, 218, 111989.10.1016/j.commatsci.2022.111989 ↗
35. Y. Shao, C. Liu, Z. Yan, H. Li, and Y. Liu, Formation Mechanism and Control Methods of Acicular Ferrite in HSLA Steels: A Review, J. Mater. Sci. Technol., 2018, 34(5), p 737–744.10.1016/j.jmst.2017.11.020 ↗
36. A. Sauraw, A.K. Sharma, D. Fydrych, S. Sirohi, A. Gupta, A. Swierczynska, C. Pandey, and G. Rogalski, Study on Microstructural Characterization, Mechanical Properties and Residual Stress of GTAW Dissimilar Joints of P91 and P22 Steels, Materials, 2021, 14(21), p 6591.10.3390/ma14216591 ↗
37. A.H. Saedi, E. Hajjari, and S.M. Sadrossadat, Microstructural Characterization and Mechanical Properties of TIG-Welded API 5L X60 HSLA Steel and AISI 310S Stainless Steel Dissimilar Joints, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2018, 49A(11), p 5497–5508.10.1007/s11661-018-4890-y ↗
38. T. Sonar, M. Ivanov, E. Trofimov, K. Liu, I. Shcherbakov, N. Shaburova, and P. Samoilovskikh, A Critical Review on Dissimilar Welding of Ferritic-Martensitic Steel and Austenitic Stainless Steel Using Gas Tungsten Arc Welding Process: Weldability Issues, Processing, and Performance Characteristics of Joints, J. Manuf. Process., 2025, 133, p 811–864.10.1016/j.jmapro.2024.11.081 ↗
39. Z. Dhib, N. Guermazi, M. Gasperini, and N. Haddar, Cladding of Low-Carbon Steel to Austenitic Stainless Steel by Hot-Roll Bonding: Microstructure and Mechanical Properties Before and After Welding, Mater. Sci. Eng. A, 2016, 656, p 130–141.10.1016/j.msea.2015.12.088 ↗
40. N. Jousset, M. Gaume, F. Bridier, J. Beaudet, J. Heuze, and A. Gourgues-Lorenzon, Effect of the Thermal History on Macrostructure and Microstructure Development in High-Strength Steel Welds, Metall. Mater. Trans. A, 2022, 53(7), p 2561–2576.10.1007/s11661-022-06686-2 ↗
41. T.A. Rodrigues, V. Duarte, J.A. Avila, T.G. Santos, R.M. Miranda, and J.P. Oliveira, Wire and Arc Additive Manufacturing of HSLA Steel: Effect of Thermal Cycles on Microstructure and Mechanical Properties, Addit. Manuf., 2019, 27, p 440–450.
42. J. Mohammadi, I. Dashtgerd, R. Riahi, and A. Mostafaei, Pulsed Gas Metal Arc Additive Manufacturing of Low-Carbon Steel: Microstructure Observations and Mechanical Properties, Mater. Today Commun., 2024, 38, p 107637.10.1016/j.mtcomm.2023.107637 ↗
43. C. Wang, X. Di, L. Dai, Y. Ma, J. Han, X. Yang, S. Cui, Y. Yu, W. Hu, and C. Li, Correlation Between Heterogeneous Micromechanical Properties and Fracture Toughness in X80 Girth Weld, Mater. Today Commun., 2024 https://doi.org/10.1016/j.mtcomm.2024.11058910.1016/j.mtcomm.2024.110589 ↗
44. J. Xue, Y. Zhang, W. Guo, M. Xia, J. Shi, G. Zhao, Q. Jia, and H. Zhang, Significantly Improving Mechanical Properties of Ultra-High Strength Steel Joints via Optimal in-Situ Post-Weld Heat Treatment, J. Mater. Process. Technol., 2025 https://doi.org/10.1016/j.jmatprotec.2025.11874110.1016/j.jmatprotec.2025.118741 ↗
45. V. Sharma and A.S. Shahi, Quenched and Tempered Steel Welded with Micro-Alloyed Based Ferritic Fillers, J. Mater. Process. Technol., 2018, 253, p 2–16.10.1016/j.jmatprotec.2017.10.039 ↗
46. Q. Cong, J. Li, L. Zhou, and M. Li, Simultaneous Improvement of Strength and Uniform Elongation of Ferrite-Bainite Steel with Heterogeneous Networked Microstructure, Mater. Lett., 2024 https://doi.org/10.1016/j.matlet.2024.13681510.1016/j.matlet.2024.136815 ↗
47. Q. Fang, L. Zhao, C. Chen, Y. Zhu, Y. Peng, and F. Yin, Effect of Heat Input on Microstructural and Mechanical Properties of High Strength Low Alloy Steel Block Parts Fabricated by Wire Arc Additive Manufacturing, Mater. Today Commun., 2023 https://doi.org/10.1016/j.mtcomm.2022.10514610.1016/j.mtcomm.2022.105146 ↗
48. Z. Lei, H. Cao, X. Cui, Y. Ma, L. Li, and Q. Zhang, A Novel High Efficiency Narrow-Gap Laser Welding Technology of 120 mm High-Strength Steel, Opt. Lasers Eng., 2024, 178, 108232.10.1016/j.optlaseng.2024.108232 ↗
49. W. Tian, H. Kong, Q. Sun, Y. Liu, C. Wang, and Q. Sun, Thermal History-Tailored Microstructure, Microhardness, and Tensile Properties in Heterogeneous Double-Wire Arc Directed Energy Deposited Martensitic Stainless Steel, J. Mater. Process. Technol., 2025 https://doi.org/10.1016/j.jmatprotec.2025.11890410.1016/j.jmatprotec.2025.118904 ↗
50. W. Bai, X. Xu, Y. Liu, Y. Liang, Y. Shen, Z. Han, Z. Sheng, R. Chen, and M. Zhu, Microstructural Evolutions and Impact Toughness in Simulated Welding Heat Affected Zones for a High-Strength Carbide-Free Bainitic Rail Steel, Mater. Sci. Eng. A, 2023 https://doi.org/10.1016/j.msea.2023.14532510.1016/j.msea.2023.145325 ↗
51. S. Sha, Q. Feng, L. Dai, Z. Li, and B. Gong, The Correlation Between Charpy Impact Energy and Microstructural Heterogeneity in the Vicinity of Fusion Line for X80 Girth Welds at Brittle-to-Ductile Transition Region, Int. J. Press. Vessels Pip., 2025 https://doi.org/10.1016/j.ijpvp.2025.10547810.1016/j.ijpvp.2025.105478 ↗
52. M. Tumer, C. Schneider-Broskamp, and N. Enzinger, Fusion Welding of Ultra-High Strength Structural Steels-A Review, J. Manuf. Process., 2022, 82, p 203–229.10.1016/j.jmapro.2022.07.049 ↗