Analysis of Tool Pin Profile Shape for Three-Layer Laminated AA 6061/TiC/GS Composite Developed by Friction Stir Additive Manufacturing Process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. M. Maurya, S. Kumar and V. Bajpai, Assessment of the Mechanical Properties of Aluminium metal Matrix Composite: A Review, J. Reinf. Plast. Compos., 2019, 38(6), p 267–298. https://doi.org/10.1177/073168441881637910.1177/0731684418816379 ↗
2. M. Maurya, A. Maurya and S. Kumar, Variants of Friction Stir Based Processes: Review on Process Fundamentals, Material Attributes and Mechanical Properties, Mater. Test., 2024, 66(2), p 271–287. https://doi.org/10.1515/mt-2023-019610.1515/mt-2023-0196 ↗
3. R.S. Mishra, R.S. Haridas and P. Agrawal, Friction Stir-Based Additive Manufacturing, Sci. Technol. Weld. Join., 2022, 27(3), p 141–165. https://doi.org/10.1080/13621718.2022.202766310.1080/13621718.2022.2027663 ↗
4. A.K. Srivastava, N. Kumar and A.R. Dixit, Friction Stir Additive Manufacturing-an Innovative Tool to Enhance Mechanical and Microstructural Properties, Mater. Sci. Eng. B, 2021, 263, 114832. https://doi.org/10.1016/j.mseb.2020.11483210.1016/j.mseb.2020.114832 ↗
5. H. Venkit and S.K. Selvaraj, Novel Approach in Manufacturing aluminum-Based Alternate Layered Composite Material Via Friction Stir Additive Manufacturing Route, Mater. Today Commun., 2024, 38, 107839. https://doi.org/10.1016/j.mtcomm.2023.10783910.1016/j.mtcomm.2023.107839 ↗
6. M. Srivastava, S. Rathee, S. Maheshwari, A.N. Siddiquee and T.K. Kundra, A Review on Recent Progress in Solid State Friction-Based Metal Additive Manufacturing: Friction Stir Additive Techniques, Crit. Rev. Solid State Mater. Sci., 2019, 44(5), p 345–377. https://doi.org/10.1080/10408436.2018.149025010.1080/10408436.2018.1490250 ↗
7. A. Hassan, M. Awang, S.R. Pedapati, K. Altaf, R.V. Marode and S.W. Ahmed, Experimental Investigation on Tool Pin Profile for Defect-Free Multi-Layered Laminates Using Friction Stir Additive Manufacturing, Res. Eng., 2023, 20, 101516. https://doi.org/10.1016/j.rineng.2023.10151610.1016/j.rineng.2023.101516 ↗
8. S. Kumar, K. Kumar, M. Maurya, and Vishal, Parametric Optimization of Friction Stir Processing on Micro-Hardness of Al/B4C Composite. Int. J. Mater. Res. 2021, 112(11), 898–909. https://doi.org/10.1515/ijmr-2020-802710.1515/ijmr-2020-8027 ↗
9. S. Palanivel, H. Sidhar and R.S. Mishra, Friction Stir Additive Manufacturing: Route to High Structural Performance, JOM, 2015, 67, p 616–621. https://doi.org/10.1007/s11837-014-1271-x10.1007/s11837-014-1271-x ↗
10. H. Z.Yu, M.E, Jones, G.W. Brady, R.J. Griffiths, D. Garcia, H. A. Rauch, C.D. Cox, and N. Hardwick, Non-beam-Based Metal Additive Manufacturing Enabled by Additive Friction Stir Deposition. Scripta Mater. 2018, 153, 122–110. https://doi.org/10.1016/j.scriptamat.2018.03.02510.1016/j.scriptamat.2018.03.025 ↗
11. S. Kheirkhah, M. Imani, R. Aliramezani, M.H. Zamani and A. Kheilnejad, Microstructure, Mechanical Properties and Corrosion Resistance of Al6061/BN Surface Composite Prepared by Friction Stir Processing, Surf. Topogr. Metrol. Prop., 2019, 7(3), 035002. https://doi.org/10.1088/2051-672X/ab2a4b10.1088/2051-672X/ab2a4b ↗
12. A. Sharma, V.M. Sharma and A.J. Paul, A Comparative Study on Microstructural Evolution and Surface Properties of Graphene/CNT Reinforced Al6061-SiC Hybrid Surface Composite Fabricated Via Friction Stir Processing, Trans. Nonferrous Met. Soc. China, 2019, 29(10), p 2005–2026. https://doi.org/10.1016/S1003-6326(19)65108-310.1016/S1003-6326(19)65108-3 ↗
13. M. Nazari, H. Eskandari and F. Khodabakhshi, Production and Characterization of an Advanced AA6061-Graphene-TiB2 Hybrid Surface Nanocomposite by Multi-Pass Friction Stir Processing, Surf. Coat. Technol., 2019, 377, 124914. https://doi.org/10.1016/j.surfcoat.2019.12491410.1016/j.surfcoat.2019.124914 ↗
14. N. Parumandla and K. Adepu, Effect of Tool Shoulder Geometry on Fabrication of Al/Al2O3 Surface Nano Composite by Friction Stir Processing, Part. Sci. Technol., 2020, 38(1), p 121–130. https://doi.org/10.1080/02726351.2018.149036110.1080/02726351.2018.1490361 ↗
15. X. Yu, H. Wu, L.M. Guo, L.L. Duan and W.C. Xiu, Investigating on Microstructural and Mechanical Properties of Al6061/nanoSiC Composites Fabricated Via Friction Stir Processing, Mater. Res. Express, 2020, 7(2), 026554. https://doi.org/10.1088/2053-1591/ab5dee10.1088/2053-1591/ab5dee ↗
16. M. Srivastava and S. Rathee, Microstructural and Micro Hardness Study on Fabrication of Al 5059/SiC Composite Component Via a Novel Route of Friction Stir Additive Manufacturing, Mater. Today Proc., 2020, 39(1), p 1775–1780. https://doi.org/10.1016/j.matpr.2020.07.13710.1016/j.matpr.2020.07.137 ↗
17. M. Zubcak, J. Soltes, M. Zimina, T. Weinberger, and N. Enzinger, Investigation of al-b4c Metal Matrix Composites Produced by Friction Stir Additive Processing. Metals 2020, 11(12). https://doi.org/10.3390/met1112202010.3390/met11122020 ↗
18. K. K. Jha, R. Kesharwani, and M. Imam, Microstructural and Microhardness Study on the Fabricated Al 5083-O/6061-T6/7075-T6 Gradient Composite Component via a Novel Route of Friction Stir Additive Manufacturing, in Material Today: Proceeding 2022, 56(1), 819–825, https://doi.org/10.1016/j.matpr.2022.02.262.10.1016/j.matpr.2022.02.262 ↗
19. D. Wu, W. Li, K. Liu, Y. Yang and S. Hao, Optimization of Cold Spray Additive Manufactured AA2024/Al2O3 Metal Matrix Composite with Heat Treatment, J. Mater. Sci. Technol., 2022, 106, p 211–224. https://doi.org/10.1016/j.jmst.2021.07.03610.1016/j.jmst.2021.07.036 ↗
20. S.P. Dwivedi, M. Maurya, A. Saxena and S. Sharma, Synthesis and Characterization Of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminium-Based Composite Material, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 2022, 236(10), p 5523–5534. https://doi.org/10.1177/0954406221106145110.1177/09544062211061451 ↗
21. S.P. Dwivedi, P. Pachauri, M. Maurya, A. Saxena, R. Butola, R. Sahu and S. Sharma, Alumina Catalyst Waste Utilization for Aluminum-Based Composites Using the Friction Stir Process, Mater. Test., 2022, 64(4), p 533–540. https://doi.org/10.1515/mt-2021-207410.1515/mt-2021-2074 ↗
22. Ak. Srivastava, M. Maurya, A. Saxena, N.K. Maurya, S.P. Dwivedi and A.R. Dixit, Microstructural and Fractographic Analysis of A359/Si3N4 Surface Composite Produced by Friction Stir Processing, Int. J. Mater. Res., 2021, 112(1), p 68–77. https://doi.org/10.1515/ijmr-2020-7827775310.1515/ijmr-2020-78277753 ↗
23. S.P. Dwivedi, N.K. Maurya, M. Maurya, A. Saxena and A.K. Srivastava, Optimization of Casting Parameters for Improved Mechanical Properties of Eggshell Reinforced Composites, Mater. Test., 2021, 63(11), p 1041–1051. https://doi.org/10.1515/mt-2021-004410.1515/mt-2021-0044 ↗
24. S. Saravanan, P. Senthilkumar, M. Ravichandran and V. Anandakrishnan, Mechanical, Electrical, and Corrosion Behavior of AA6063/TiC Composites Synthesized Via Stir Casting Route, J. Mater. Res., 2017, 33(3), p 606–614. https://doi.org/10.1557/jmr.2016.50310.1557/jmr.2016.503 ↗
25. S. P. Dwivedi, A. K. Srivastava, N. K. Maurya, and M. Maurya. Microstructure and Mechanical Properties of Al 6061/Al2O3/Fly-Ash Composite Fabricated Through Stir Casting. Annales de Chimie: Science des Materiaux 2019, 43(5): 341-348, https://doi.org/10.18280/acsm.43051010.18280/acsm.430510 ↗