Strength–Ductility Synergy Achieved by Single-Step Aging in Inconel 718 by Laser Powder Bed Fusion

1. E. Sadeghi, P. Karimi, R. Esmaeilizadeh, F. Berto, S. Shao, J. Moverare, E. Toyserkani, and N. Shamsaei, A State-of-the-Art Review on Fatigue Performance of Powder Bed Fusion-Built Alloy 718, Prog. Mater. Sci., 2023, 133, p 101066.10.1016/j.pmatsci.2022.101066 ↗

2. S. Chandra, J. Radhakrishnan, S. Huang, S. Wei, and U. Ramamurty, Solidification in Metal Additive Manufacturing: Challenges, Solutions, and Opportunities, Prog. Mater. Sci., 2025, 148, p 101361.10.1016/j.pmatsci.2024.101361 ↗

3. J. Radhakrishnan, P. Kumar, S. Li, Y. Zhao, and U. Ramamurty, Unnotched Fatigue of Inconel 718 Produced by Laser Beam-Powder Bed Fusion at 25 and 600 ℃, Acta Mater., 2022, 225, p 117565.10.1016/j.actamat.2021.117565 ↗

4. D. Herzog, K. Asami, C. Scholl, C. Ohle, C. Emmelmann, A. Sharma, N. Markovic, and A. Harris, Design Guidelines for Laser Powder Bed Fusion in Inconel 718, J. Laser Appl., 2021 https://doi.org/10.2351/7.000050810.2351/7.0000508 ↗

5. M. He, H. Cao, Q. Liu, J. Yi, Y. Ni, and S. Wang, Evolution of Dislocation Cellular Pattern in Inconel 718 Alloy Fabricated by Laser Powder-Bed Fusion, Addit. Manuf., 2022, 55, p 102839.

6. K. Cho, K. Yamashita, S. Kakutani, T. Saito, T. Sasaki, K. Sawaizumi, M. Okugawa, Y. Koizumi, T. Mayama, T. Kikukawa, O. Gokcekaya, T. Ishimoto, H. Kimizuka, W. Gong, T. Kawasaki, S. Harjo, T. Nakano, and H.Y. Yasuda, Effect of Nanoscale Cellular Structure on the Mechanical Properties of Inconel 718 with Unique Hierarchical Structure Fabricated by Laser Powder Bed Fusion, Acta Mater., 2026, 303, p 121696.10.1016/j.actamat.2025.121696 ↗

7. R. Shi, S.A. Khairallah, T.T. Roehling, T.W. Heo, J.T. McKeown, and M.J. Matthews, Microstructural Control in Metal Laser Powder Bed Fusion Additive Manufacturing using Laser Beam Shaping Strategy, Acta Mater., 2020, 184, p 284–305.10.1016/j.actamat.2019.11.053 ↗

8. N. Hasani, C. Dharmendra, M. Sanjari, F. Fazeli, B.S. Amirkhiz, H. Pirgazi, G.D.J. Ram, and M. Mohammadi, Laser Powder Bed Fused Inconel 718 in Stress-Relieved and Solution Heat-Treated Conditions, Mater Charact, 2021, 181, p 111499.10.1016/j.matchar.2021.111499 ↗

9. S. Naskar, S. Suryakumar, and B.B. Panigrahi, Post-processing of Inconel 718 Superalloy by Laser-Based Powder Bed Fusion: Microstructures and Properties Evaluation, Mater. Sci. Eng. A, 2025, 921, p 147601.10.1016/j.msea.2024.147601 ↗

10. J.J. Rindler, C.E. Slone, E.D. Herderick, M.J. Mills, and A.J. Ramirez, Investigation on the Potential Effects of Laser Stitching and Subsequent Heat Treatment on the Microstructure and Mechanical Properties of Nickel Alloy 718 Produced via Laser Powder Bed Fusion (L-PBF), Addit. Manuf., 2022, 57, p 102906.

11. B. Padasale and S.R. Hegde, Influence of δ-Phase on the Grain Shape and Mechanical Properties of Inconel 718, J. Mater. Eng. Perform., 2025, 34(22), p 27102–27115.10.1007/s11665-025-11179-5 ↗

12. W. Huang, J. Yang, H. Yang, G. Jing, Z. Wang, and X. Zeng, Heat Treatment of Inconel 718 Produced by Selective Laser Melting: Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2019, 750, p 98–107.10.1016/j.msea.2019.02.046 ↗

13. S. Azadian, L.-Y. Wei, and R. Warren, Delta Phase Precipitation in Inconel 718, Mater Charact, 2004, 53(1), p 7–16.10.1016/j.matchar.2004.07.004 ↗

14. M. Laleh, E. Sadeghi, R.I. Revilla, Q. Chao, N. Haghdadi, A.E. Hughes, W. Xu, I. De Graeve, M. Qian, I. Gibson, and M.Y. Tan, Heat Treatment for Metal Additive Manufacturing, Prog. Mater. Sci., 2023, 133, p 101051.10.1016/j.pmatsci.2022.101051 ↗

15. E.M. Fayed, M. Saadati, D. Shahriari, V. Brailovski, M. Jahazi, and M. Medraj, Effect of Homogenization and Solution Treatments Time on the Elevated-Temperature Mechanical Behavior of Inconel 718 Fabricated by Laser Powder Bed Fusion, Sci. Rep., 2021, 11(1), p 2020.10.1038/s41598-021-81618-5 ↗

16. G. Kasperovich, J. Gussone, G. Requena, N. Schell, A. Stark, and J. Haubrich, Tailoring the Strength of inconel 718: Insights into LPBF Parameters and Heat Treatment Synergy, Mater. Des., 2025, 250, p 113627.10.1016/j.matdes.2025.113627 ↗

17. B. Liu, Y. Ding, J. Xu, Y. Gao, X. Wang, H. Zhang, Y. Hu, and F. Sun, Outstanding Strength-Ductility Synergy in Inconel 718 Superalloy via Laser Powder Bed Fusion and Thermomechanical Treatment, Additive Manuf., 2023, 67, p 103491.10.1016/j.addma.2023.103491 ↗

18. P.E. May, M. White, A. Bordin, L. Ednie, R. Huff, S. Vunnam, L. Becker, and R.J. Lancaster, Influence of Heat Treatment on the High Temperature Properties of Inconel 718 Fabricated via Laser Beam Powder Bed Fusion, J. Mater. Res. Technol., 2025, 36, p 9881–9897.10.1016/j.jmrt.2025.05.140 ↗

19. S. Dinesh and J. Sahu, Effect of Heat Treatment on Strengthening Kinetics and Microstructural Evolution in Laser Powder Bed Fusion-Processed Inconel 718, J. Mater. Eng. Perform., 2025, 35, p 19520–19540.10.1007/s11665-025-13008-1 ↗

20. A. Dwivedi, M.K. Khurana, Y.G. Bala, and S.B. Mishra, Influence of Modified Heat Treatment on Microstructure, Hardness and Wear Resistance of Inconel 718 Fabricated by Powder Bed Fusion-Laser Beam Additive Manufacturing Process, J. Mater. Eng. Perform., 2025, 34(22), p 27461–27477.10.1007/s11665-025-11290-7 ↗

21. S. Nayir, B. Max, A.D. Iams, S. Perusin, J.S. Zuback, L.A. Giannuzzi, and F. Zhang, Effect of Homogenization Heat Treatment on the Evolution of Carbonitrides in Powder Bed Fusion Processed Inconel 718, Mater Charact, 2025, 227, p 115271.10.1016/j.matchar.2025.115271 ↗

22. Y. Zhao, F. Meng, C. Liu, S. Tan, and W. Xiong, Impact of Homogenization on Microstructure-Property Relationships of Inconel 718 Alloy Prepared by Laser Powder Bed Fusion, Mater. Sci. Eng. A, 2021, 826, p 141973.10.1016/j.msea.2021.141973 ↗

23. S.K. Sahu, S. Mohapatra, B.S. Meher, A. Behera, and R.P. Dalai, Effect of Heat Treatment on the Microstructure and Mechanical Properties of Laser Powder Bed Fusion-Processed Inconel 718 Superalloy, J. Mater. Eng. Perform., 2026 https://doi.org/10.1007/s11665-026-13616-510.1007/s11665-026-13616-5 ↗

24. C. Guo, J. Lu, X. Cheng, S. Huang, T. Wang, Y. Zhang, and Z. Zhang, Effect of Recrystallization on Strength and Plasticity of LPBF Inconel 718 Superalloy, Mater. Today Commun., 2025, 46, p 112775.10.1016/j.mtcomm.2025.112775 ↗

25. R.E. Kubilay and W.A. Curtin, Theory of Twin Strengthening in FCC High Entropy Alloys, Acta Mater., 2021, 216, p 117119.10.1016/j.actamat.2021.117119 ↗

26. K. Lu, L. Lu, and S. Suresh, Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale, Science, 2009, 324(5925), p 349–352.10.1126/science.1159610 ↗

27. D. Jia, X. Cheng, and J. Lu, Effect of Recrystallization on Plastic Deformation of LPBF-Inconel 718 Superalloy: The Role of Annealing Twins, Mater Charact, 2026, 234, p 116199.10.1016/j.matchar.2026.116199 ↗