Effect of Laser Power on the Microstructure and Mechanical Properties of High-Speed Laser-Cladded Coating on 27SiMn Steel

1. B. Jin, M. Han, C. Huang, H.P.H. Arp, and G. Zhang, Towards improved characterization of the fate and impact of hydraulic fracturing chemicals to better secure regional water quality, Environ Sci Process Impacts, 2022, 24(4), p 497–503. https://doi.org/10.1039/D2EM00034B10.1039/D2EM00034B ↗

2. Y.F. Cao, Y. Chen, P.X. Fu, H.W. Liu, and D.Z. Li, The experimental characterization and numerical simulation of A-segregates in 27SiMn steel, Metall. Mater. Trans. A., 2017, 48, p 2260–2273. https://doi.org/10.1007/s11661-017-4006-010.1007/s11661-017-4006-0 ↗

3. X. Zhou and H. Shao, Analysis of piston seal performance of pure water cylinder of hydraulic support, J Phys Confer Ser IOP Publ, 2021, 1985(1), p 012035. https://doi.org/10.1088/1742-6596/1985/1/01203510.1088/1742-6596/1985/1/012035 ↗

4. H. Wang, Y. Wang, Z. Zhang, X. Liu, and S. Xu, Cyclic behavior and hysteresis model of beam-column joint under salt spray corrosion environment, J. Constr. Steel Res., 2021, 183, p 106737. https://doi.org/10.1016/j.jcsr.2021.10673710.1016/j.jcsr.2021.106737 ↗

5. H. Ren, D. Zhang, S. Gong, K. Zhou, C. Xi, M. He, and T. Li, Dynamic impact experiment and response characteristics analysis for 1: 2 reduced-scale model of hydraulic support, Int. J. Min. Sci. Technol., 2021, 31(3), p 347–356. https://doi.org/10.1016/j.ijmst.2021.03.00410.1016/j.ijmst.2021.03.004 ↗

6. Y. Tang, X. Wang, H. Li, C. Gao, and X. Miao, Experimental research on interior field noise and the vibration characteristics of composite reinforced sheet-beam structures, Appl. Acoust., 2020, 160(107154), p 107154. https://doi.org/10.1016/j.apacoust.2019.10715410.1016/j.apacoust.2019.107154 ↗

7. Y. Tang, X. Wang, H. Li, C. Gao, and X. Miao, Experimental research on interior field noise and the vibration characteristics of composite reinforced sheet-beam structures, Appl. Acoust., 2020, 160, p 107154. https://doi.org/10.1016/j.surfcoat.2009.07.03310.1016/j.surfcoat.2009.07.033 ↗

8. S.M. Gateman, S.A. Alidokht, E. Mena-Morcillo, R. Schulz, R.R. Chromik, A.M. Kietzig, and J. Mauzeroll, Wear resistant solid lubricating coatings via compression molding and thermal spraying technologies, Surface Coat Technol, 2021, 426, p 127790. https://doi.org/10.1016/j.surfcoat.2021.12779010.1016/j.surfcoat.2021.127790 ↗

9. D. Fu, T.A. Kurniawan, R. Avtar, P. Xu, and M.H.D. Othman, Recovering heavy metals from electroplating wastewater and their conversion into Zn2Cr-layered double hydroxide (LDH) for pyrophosphate removal from industrial wastewater, Chemosphere, 2021, 271, p 129861. https://doi.org/10.1016/j.chemosphere.2021.12986110.1016/j.chemosphere.2021.129861 ↗

10. S. Sitthipong, P. Towatana, A. Sitticharoenchai, and C. Meengam, Abrasive wear behavior of surface hardfacing on propeller shaftsAISI 4140Alloy steel, Mater Today Proce, 2017, 4(2), p 1492–1499. https://doi.org/10.1016/j.matpr.2017.01.17110.1016/j.matpr.2017.01.171 ↗

11. X. Qiao, Y.M. Wang, W.X. Weng, B.L. Liu, and Q. Li, Influence of pores on mechanical properties of plasma sprayed coatings: case study of YSZ thermal barrier coatings, Ceram. Int., 2018, 44(17), p 21564–21577. https://doi.org/10.1016/j.ceramint.2018.08.22010.1016/j.ceramint.2018.08.220 ↗

12. W. Shang, F. Wu, S. Jiang, Y. Wen, N. Peng, and J. Jiang, Effect of hydrophobicity on the corrosion resistance of microarc oxidation/self-assembly/nickel composite coatings on magnesium alloys, J. Mol. Liq., 2021, 330, p 115606. https://doi.org/10.1016/j.molliq.2021.11560610.1016/j.molliq.2021.115606 ↗

13. T. Yamaguchi, K. Tanaka, and H. Hagino, Porosity reduction in WC-12Co laser cladding by aluminum addition, Int. J. Refract Metal Hard Mater., 2023, 110, p 106020. https://doi.org/10.1016/j.ijrmhm.2022.10602010.1016/j.ijrmhm.2022.106020 ↗

14. B. Wen, J. Zhou, P. Tang, X. Jia, W. Zhou, and J. Huang, Antimony (Sb) isotopic signature in water systems from the world’s largest Sb mine, central China: novel insights to trace Sb source and mobilization, J. Hazard. Mater., 2023, 446, p 130622. https://doi.org/10.1016/j.jhazmat.2022.13062210.1016/j.jhazmat.2022.130622 ↗

15. Q. Zhang, Q. Wang, B. Han, M. Li, C. Hu, and J. Wang, Comparative studies on microstructure and properties of CoCrFeMnNi high entropy alloy coatings fabricated by high-speed laser cladding and normal laser cladding, J. Alloy. Compd., 2023, 947, p 169517. https://doi.org/10.1016/j.jallcom.2023.16951710.1016/j.jallcom.2023.169517 ↗

16. T. Schopphoven, A. Gasser, K. Wissenbach, and R. Poprawe, Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying, J Laser Appl, 2016 https://doi.org/10.2351/1.494391010.2351/1.4943910 ↗

17. R. Zhang, K. Lv, Z. Du, W. Chen, P. Ji, and M. Wang, Effects of graphene on the wear and corrosion resistance of micro-arc oxidation coating on a titanium alloy, Metals, 2021, 12(1), p 70. https://doi.org/10.3390/met1201007010.3390/met12010070 ↗

18. Z. Ning, W. Yu, H.Q. Liu, and Q.W. Cai, Effect of reduction pretreatment process on evolution of micro-porosity in 42CrMo billet, J. Iron. Steel Res. Int., 2021, 28, p 413–423. https://doi.org/10.1007/s42243-020-00434-910.1007/s42243-020-00434-9 ↗

19. A. Meghwal, S. Pinches, A. Anupam, L. Lie, P. Munroe, C.C. Berndt, and A.S.M. Ang, Structure-property correlation of a CoCrFeNi medium-entropy alloy manufactured using extreme high-speed laser material deposition (EHLA), Intermetallics, 2023, 152, p 107769. https://doi.org/10.1016/j.intermet.2022.10776910.1016/j.intermet.2022.107769 ↗

20. W. Yuan, R. Li, Z. Chen, J. Gu, and Y. Tian, A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings, Surf. Coat. Technol., 2021, 405, p 126582. https://doi.org/10.1016/j.surfcoat.2020.12658210.1016/j.surfcoat.2020.126582 ↗

21. Q. Bai, Q. Li, J. Zhang, R. Wang, C. Zhao, and Y. Liu, Effect of power spinning on microstructure and wear resistance of high-speed laser cladding Fe-based coating, Int J Adv Manuf Technol, 2023, 125(7), p 3255–3265. https://doi.org/10.1007/s00170-023-10917-010.1007/s00170-023-10917-0 ↗

22. J.L. Du, X. Xu, H.M. Zhang, M.W. Lu, J.F. Sun, K.Y. Luo, and J.Z. Lu, Microstructure and wear resistance of CoCrFeNiMn coatings prepared by extreme-high-speed laser cladding, Surf. Coat. Technol., 2023, 470, p 129821. https://doi.org/10.1016/j.surfcoat.2023.12982110.1016/j.surfcoat.2023.129821 ↗

23. L. Delai, W. Bo, Z. Panhu et al., Effect of laser power on microstructure and mechanical properties of high-speed laser clad Ni/316L layer, Heat Treat Metals, 2021, 46(5), p 213–218. https://doi.org/10.13251/j.issn.0254-6051.2021.05.03710.13251/j.issn.0254-6051.2021.05.037 ↗

24. Y. Fan, Y. Zhao, Y. Liu, S. Xie, C. Ge, X. Han, and H. Chen, Parameter optimization and mechanical properties of laser cladding of 316L stainless steel powder on G20Mn5QT steel, Coatings, 2023, 13(3), p 481. https://doi.org/10.3390/coatings1303048110.3390/coatings13030481 ↗

25. R.R. Rashid, C.J. Barr, S. Palanisamy, K.A. Nazari, N. Orchowski, N. Matthews, and M.S. Dargusch, Effect of clad orientation on the mechanical properties of laser-clad repaired ultra-high strength 300 M steel, Surf. Coat. Technol., 2019, 380, p 125090. https://doi.org/10.1016/j.surfcoat.2019.12509010.1016/j.surfcoat.2019.125090 ↗

26. L. Shu, Z. Heng, P. Li, H. Wu, J. Li, and J. Feng, Effect of laser powers on the mechanical properties 27SiMn steel with Inconel 718 cladding coatings, Mater Res Express, 2022, 9(9), p 096511. https://doi.org/10.1088/2053-1591/ac8f2110.1088/2053-1591/ac8f21 ↗

27. M. Hoch, Application of the Hoch-Arpshofen model to the thermodynamics of the Cu-Ni-Sn, Cu-Fe-Ni, Cu-Mg-Al, and Cu-Mg-Zn systems, Calphad, 1987, 11(3), p 237–246. https://doi.org/10.1016/0364-5916(87)90042-310.1016/0364-5916(87)90042-3 ↗

28. H.W. Yang, J. Wen, M.X. Quan, and J.Q. Wang, Evaluation of the volume fraction of nanocrystals devitrified in Al-based amorphous alloys, J. Non-Cryst. Solids, 2009, 355(4–5), p 235–238. https://doi.org/10.1016/j.jnoncrysol.2008.12.00110.1016/j.jnoncrysol.2008.12.001 ↗

29. Y. Lee, M. Nordin, S.S. Babu, and D.F. Farson, Effect of fluid convection on dendrite arm spacing in laser deposition, Metall. Mater. Trans. B., 2014, 45, p 1520–1529. https://doi.org/10.1007/s11663-014-0054-710.1007/s11663-014-0054-7 ↗