Influence of Nb Microalloying on the Microstructure and Toughness of 1000 MPa-Grade Deposited Weld Metals
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (27)
Show source-provided references
1. X.Di, M.Tong, C.Li, C.Zhao, and D. Wang, Microstructural Evolution and Its Influence on Toughness in Simulated Inter-Critical Heat Affected Zone of Large Thickness Bainitic Steel, Mater. Sci. Eng. A, 2019, 743, p 67–76.10.1016/j.msea.2018.11.070 ↗
2. Y.Zhou, T.Jia, X.Zhang, Z.Liu, and R.D.K. Misra, Microstructure and Toughness of the CGHAZ of an Offshore Platform Steel, J. Mater. Process. Technol., 2015, 219, p 314–320.10.1016/j.jmatprotec.2014.12.017 ↗
3. S.Zhang, T.Melfi, and B.K.Narayanan, Effects of Precipitates on Mechanical Properties of P91 Submerged Arc Welds, Sci. Technol. Weld. Join., 2016, 21(2), p 147–156.10.1179/1362171815Y.0000000076 ↗
4. D.Fubao, and H.Yue, Progress of the Chinese Shipbuilding Industry and Welding Technology, China Weld., 1994, 2, p 105–114.
5. Xu.Longyun, J.Yang, and R.Wang, Influence of Al Content on the Inclusion-Microstructure Relationship in the Heat-Affected Zone of a Steel Plate with Mg Deoxidation after High-Heat-Input Welding, Metals, 2018, 8(12), p 1027. https://doi.org/10.3390/met812102710.3390/met8121027 ↗
6. Y.Chen, D.Zhang, Y.Liu, H.Li, and D.Xu, Effect of Dissolution and Precipitation of Nb on the Formation of Acicular Ferrite/Bainite Ferrite in Low-Carbon HSLA Steels, Mater Charact, 2013, 84, p 232–239.10.1016/j.matchar.2013.08.005 ↗
7. S.Wei and S.Lu, Effects of Multiple Normalizing Processes on the Microstructure and Mechanical Properties of Low Carbon Steel Weld Metal with and without Nb, Mater. Des., 2012, 35, p 43–54.10.1016/j.matdes.2011.09.065 ↗
8. X.Zhang, D.Li, Y.Li, and S. Lu, Effect of Aging Treatment on the Microstructures and Mechanical Properties Evolution of 25Cr-20Ni Austenitic Stainless Steel Weldments with Different Nb Contents, J. Mater. Sci. Technol., 2019, 35(4), p 520–529.10.1016/j.jmst.2018.10.017 ↗
9. P.Gong, E.J.Palmiere, and W.M. Rainforth, Dissolution and Precipitation Behaviour in Steels Microalloyed with Niobium during Thermomechanical Processing, Acta Mater., 2015, 97, p 392–403.10.1016/j.actamat.2015.06.057 ↗
10. Y.Yang, X.Jia, Y.Ma, P.Wang, F.Zhu, H.Yang, C.Wang, and S.Wang, Effect of Nb on Microstructure and Mechanical Properties between Base Metal and High Heat Input Coarse-Grain HAZ in a Ti-Deoxidized Low Carbon High Strength Steel, J. Mater. Res. Technol., 2022, 18, p 2399–2412.10.1016/j.jmrt.2022.03.150 ↗
11. Y.Q.Zhang, H.Q.Zhang, W.M.Liu, and H.Hou, Effects of Nb on Microstructure and Continuous Cooling Transformation of Coarse Grain Heat-Affected Zone in 610MPa Class High-Strength Low-Alloy Structural Steels, Mater. Sci. Eng. A, 2009, 499(1), p 182–186.10.1016/j.msea.2007.10.118 ↗
12. Y.Yang, X.Jia, Y.Ma, P.Wang, and F.Zhu, Effect of Nb on Inclusions and Phase Transformation in Simulated High Heat Input Coarse-Grain HAZ of Nb/Ti Low Carbon Microalloyed Steel, Mater Charact, 2022, 189, 111966.10.1016/j.matchar.2022.111966 ↗
13. J.Moon, G.Bae, B.-Y.Jeong, C.Shin, M.-J.Kwon, D.-I. Kim, D.-J. Choi, B.H. Lee, C.-H. Lee, H.-U. Hong, D.-W. Suh and D. Ponge, Ultrastrong and Ductile Steel Welds Achieved by Fine Interlocking Microstructures with Film-like Retained Austenite, Nature Communications, 2024 https://doi.org/10.1038/s41467-024-45470-110.1038/s41467-024-45470-1 ↗
14. T. Li, J.Yang, Y.Zhang, Y.Chen, and Y.Zhang, Particles, Microstructures, and Impact Toughness of CGHAZ of Ca Deoxidation Shipbuilding Steel Plates with Different Nb Contents, Steel Res Int, 2023 https://doi.org/10.1002/srin.20230002010.1002/srin.202300020 ↗
15. Y.Zhang, X.Li, Y.Liu, C.Liu, J.Dong, L.Yu, and H. Li, Study of the Kinetics of Austenite Grain Growth by Dynamic Ti-Rich and Nb-Rich Carbonitride Dissolution in HSLA Steel: In-Situ Observation and Modeling, Mater Charact, 2020, 169, 110612.10.1016/j.matchar.2020.110612 ↗
16. A.Di Schino, and P.E Di Nunzio, Effect of Nb Microalloying on the Heat Affected Zone Microstructure of Girth Welded Joints, Mater. Lett., 2017, 186, p 86–89.10.1016/j.matlet.2016.09.092 ↗
17. A.Iza-Mendia and I.Gutiérrez, Generalization of the Existing Relations between Microstructure and Yield Stress from Ferrite-Pearlite to High Strength Steels, Mater. Sci. Eng. A, 2013, 561, p 40–51.10.1016/j.msea.2012.10.012 ↗
18. B.B.Wu, Z.Q.Wang, X.L.Wang, W.S.Xu, C.J.Shang, and R.D.K. Misra, Toughening of Martensite Matrix in High Strength Low Alloy Steel: Regulation of Variant Pairs, Mater. Sci. Eng. A, 2019, 759, p 430–436.10.1016/j.msea.2019.05.030 ↗
19. X.Yang, X. Di, X. Liu, D.Wang, and C. Li, Effects of Heat Input on Microstructure and Fracture Toughness of Simulated Coarse-Grained Heat Affected Zone for HSLA Steels, Mater Charact, 2019, 155, 109818.10.1016/j.matchar.2019.109818 ↗
20. J.Wang, C. Li, D.Wang, and X.Di, Effect of Microalloying with Nb and/or V on the Microstructure and Mechanical Properties of GPa Grade Deposited Metals, Weld. World, 2023, 67(9), p 2107–2122.10.1007/s40194-023-01531-5 ↗
21. H.Wang, Brittle Fracture Behaviors of Large Die Holders Used in Hot Die Forging, Metals, 2018, 7, p 198.
22. Z.Zhang, X.Sun, Q.Yong, Z.Li, Z.Wang, and G.Wang, Precipitation behavior of nanometer-sized carbides in Nb-Mo microalloyed high strength steel and its strengthening mechanism, Acta Met. Sin. -Engl, 2016, 52, p 410–418.
23. J.Moon, S.Kim, H.Jeong, J.Lee, and C.Lee, Influence of Nb Addition on the Particle Coarsening and Microstructure Evolution in a Ti-Containing Steel Weld HAZ, Mater. Sci. Eng. A, 2007, 454–455, p 648–653.10.1016/j.msea.2006.11.125 ↗
24. X.Yang, X.Chen, S.Pan, Z.Wang, K.Chen, D. Li, and J.Qin, Microstructure and Mechanical Properties of Ultralow Carbon High-Strength Steel Weld Metals with or without Cu-Nb Addition, Int. J. Miner. Metall. Mater., 2021, 28(1), p 120–130.10.1007/s12613-020-2159-0 ↗
25. J.Kang, L.Zhao, T. An, Z.Cao, Y.Zuo, and C.Ma, Effect of Carbon Content on Strength and Toughness of Deposited Metal for 1000 MPa-Grade High-Strength Welding Wire, Mater. Today Commun., 2024, 39, 108930.10.1016/j.mtcomm.2024.108930 ↗
26. H.Bhadeshia, Models for the Elementary Mechanical Properties of Steel Welds, Institute of Materials, London, 1997, p 229–284
27. X.Xi, J.Wang, L.Chen, and Z.Wang, On the Role of Cu Addition in Toughness Improvement of Coarse Grained Heat Affected Zone in a Low Carbon High Strength Steel, J. Mater. Sci., 2020, 55(24), p 10863–10877.10.1007/s10853-020-04710-7 ↗