High-Viscosity Silver Nanoink: Direct-Write Processing and Low-Temperature Sintering for Flexible Electronics

1. R.B. Mishra, N. El-Atab, A.M. Hussain et al., Recent Progress on Flexible Capacitive Pressure Sensors: From Design and Materials to Applications, Adv. Mater. Technol., 2021, 6(4), p 2001023.10.1002/admt.202001023 ↗

2. A. Sarycheva, A. Polemi, Y. Liu et al., 2D Titanium Carbide (MXene) for Wireless Communication, Sci. Adv., 2018, 4(9), p eaau0920.10.1126/sciadv.aau0920 ↗

3. H. Wang, S. Li, H. Lu et al., Carbon‐Based Flexible Devices for Comprehensive Health Monitoring, Small Methods, 2023, 7(2), p 2201340.10.1002/smtd.202201340 ↗

4. Y. Yao, W. Huang, J. Chen et al., Flexible and Stretchable Organic Electrochemical Transistors for Physiological Sensing Devices, Adv. Mater., 2023, 35(35), p 2209906.10.1002/adma.202209906 ↗

5. Q. Wang, M. Li, Y. Xie, Y. Ou, and W. Zhou, Direct Writing on Paper Substrate to Prepare Silver Electrode Structures for Flexible Sensors, J. Nanosci. Nanotechnol., 2021, 21(12), p 6048–6053.10.1166/jnn.2021.19523 ↗

6. F.C. Loghin, J.F. Salmerón, P. Lugli, M. Becherer, A. Falco, and A. Rivadeneyra, Optimization of a Handwriting Method by an Automated Ink Pen for Cost-Effective and Sustainable Sensors, Chemosensors, 2021, 9(9), p 264.10.3390/chemosensors9090264 ↗

7. Q. Du, L. Liu, R. Tang, J. Ai, Z. Wang, Q. Fu, C. Li, Y. Chen, and X. Feng, High‐Performance Flexible Pressure Sensor Based on Controllable Hierarchical Microstructures by Laser Scribing for Wearable Electronics, Adv. Mater. Technol., 2021, 6(9), p 2100122.10.1002/admt.202100122 ↗

8. L. Zhao, K. Jiao, C. Li, E. Yin, and W. Zhao, Research of 3D Printing Technology for Silver Paste based on Direct Ink Writing. 2022 23rd International Conference on Electronic Packaging Technology (ICEPT), 1–4 202210.1109/ICEPT56209.2022.9873368 ↗

9. W. Guo, Y. Fu, G. Kumar Dalapati, J. Hu, X. Yan, and S. Ramakrishna, Electrohydrodynamic Direct Writing of Well-Defined and High-Performance Multifunctional Conductive Patterns Towards flexible and Washable E-Textiles Using UV-Curable Silver Ink, Chem. Eng. J., 2024, 500, p 157213.10.1016/j.cej.2024.157213 ↗

10. P. Guo, L. Ma, Q. Ge, J. Shi, S. Li, and S. Ji, Precise Patterning of Flexible Transparent and Conductive Films without Chemical Etchings and Applications in Capacitive Proximity Sensors, Adv. Mater. Technol., 2024, 10(4), p 2400476.10.1002/admt.202400476 ↗

11. Q.J. Liew, N. Abdul Rashid, H.W. Lee, H.F. Hawari, and M.H. Md Khir, Inkjet-Printed Flexible Temperature Sensor Using Hybrid Reduced Graphene Oxide – Silver Nanoparticles(rGO/AgNPs) Conductive Ink and Silver Nanoparticles Ink, J. Phys. Conf. Ser., 2021, 1878(1), p 012059.10.1088/1742-6596/1878/1/012059 ↗

12. N.X. Williams, S. Noyce, J.A. Cardenas, M. Catenacci, B.J. Wiley, and A.D. Franklin, Silver Nanowire Inks for Direct-Write Electronic Tattoo Applications, Nanoscale, 2019, 11(30), p 14294–14302.10.1039/C9NR03378E ↗

13. V.K. Gupta and N. Kumar, Direct Ink Writing of Copper-Based Highly Conductive Tracks on Flexible Substrate for Electronic Applications, Mater. Lett., 2024, 372, p 137008.10.1016/j.matlet.2024.137008 ↗

14. A. Novikovs, T. Tsebriienko, A. Trausa, A. Berzina, G. Chikvaidze, D. Bocharov, M.Y. Mulla, J. Purans, and B. Polyakov, Novel Terpineol-Based Silver Nanoparticle Ink with High Stability for Inkjet Printing, Nanomaterials, 2025, 15(13), p 955.10.3390/nano15130955 ↗

15. D. Zeyu, L. Shuxuan, H. Ruibo, J. Yaxin, X. Shijie, J. Xin, and Z. Wenyan, Preparation of Nano-silver Conductive Ink and its Application in High-Precision Flexible Circuit Printing, Rare. Metal. Mater. Eng., 2023, 52(10), p 3530.

16. A. Boumegnane, S. Douhi, A. Batine, T. Dormois, C. Cochrane, A. Nadi, O. Cherkaoui, and M. Tahiri, Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas, Sensors, 2024, 24(9), p 2938.10.3390/s24092938 ↗

17. S. Li, L. Gao, and H. Liu, Molecular Dynamics Simulation Study on Viscosity of Silver Nanoparticle Printing Ink, IOP Conf. Ser.: Earth Environ. Sci., 2021, 632(5), p 052033.10.1088/1755-1315/632/5/052033 ↗

18. L. Mo, Z. Guo, L. Yang, Q. Zhang, Y. Fang, Z. Xin, Z. Chen, K. Hu, L. Han, and L. Li, Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics, Int. J. Mol. Sci., 2019, 20(9), p 2124.10.3390/ijms20092124 ↗

19. B.F.Y. Rezaga and M.D.L. Balela, Conductive Inks with Chemically Sintered Silver Nanoparticles at Room Temperature for Printable, Flexible Electronic Applications, Key Eng. Mater., 2024, 983, p 9–16.10.4028/p-DAaz5z ↗

20. X. Xie, Z. Wu, D. Pan, and X. Shi, Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink, J. Phys. Conf. Ser., 2024, 2785(1), p 012111.10.1088/1742-6596/2785/1/012111 ↗

21. H.W. Tan, N. Saengchairat, G.L. Goh, J. An, C.K. Chua, and T. Tran, Induction Sintering of Silver Nanoparticle Inks on Polyimide Substrates, Adv. Mater. Technol., 2020, 5(1), p 1900897.10.1002/admt.201900897 ↗

22. J. Xue, D. Yu, Y. Zhao, X. Yue, J. Cai, P. Zhang, and K. Peng, Plasma Jet Printing of Silver Patterns on Flexible Substrates: Conductive Properties and Control Mechanism, Plasma Proc. Polym., 2024, 21(10), p e2400110.10.1002/ppap.202400110 ↗

23. A. Hamad, A. Archacki, and A. Mian, Characteristics of Nanosilver Ink (UTDAg) Microdroplets and Lines on Polyimide during Inkjet Printing at High Stage Velocity, Mater. Adv., 2020, 1(1), p 99–107.10.1039/D0MA00048E ↗

24. P. Naderi, B.R. Sheuten, A. Amirfazli, and G. Grau, Inkjet Printing on Hydrophobic Surfaces: Controlled Pattern Formation Using Sequential Drying, J. Chem. Phys., 2023 https://doi.org/10.1063/5.014966310.1063/5.0149663 ↗

25. K. Sim, S. Chen, Z. Li et al., Three-Dimensional Curvy Electronics Created Using Conformal Additive Stamp Printing, Nat. Electron., 2019, 2(10), p 471–479.10.1038/s41928-019-0304-4 ↗

26. J. Bae, S. Oh, B. Lee et al., High-Performance, Printable Quasi-Solid-State Electrolytes Toward All 3D Direct Ink Writing of Shape-Versatile Li-ion Batteries, Energy Storage Mater., 2023, 57, p 277–288.10.1016/j.ensm.2023.02.016 ↗

27. K. You, Z. Wang, J. Lin et al., On-Demand Picoliter-Level-Droplet Inkjet Printing for Micro Fabrication and Functional Applications, Small, 2024, 20(46), p 2402638.10.1002/smll.202402638 ↗

28. B. Derby, Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution, Annu. Rev. Mater. Res., 2010, 40(1), p 395–414.10.1146/annurev-matsci-070909-104502 ↗

29. S. Hong, J.W. Na, I.S. Lee et al., Simultaneously Defined Semiconducting Channel Layer Using Electrohydrodynamic Jet Printing of a Passivation Layer for Oxide Thin-Film Transistors, ACS Appl. Mater. Interfaces, 2020, 12(35), p 39705–39712.10.1021/acsami.0c07091 ↗

30. X. Zheng, M. Hu, Y. Liu et al., High-Resolution Flexible Electronic Devices by Electrohydrodynamic Jet Printing: From Materials Toward Applications, Sci. China Mater., 2022, 65(8), p 2089–2109.10.1007/s40843-021-1988-8 ↗

31. N. Mkhize and H. Bhaskaran, Electrohydrodynamic Jet Printing: Introductory Concepts and Considerations, Small Sci., 2022, 2(2), p 2100073.10.1002/smsc.202100073 ↗

32. P. Galliker, J. Schneider, H. Eghlidi et al., Direct Printing of Nanostructures by Electrostatic Autofocussing of Ink Nanodroplets, Nat. Commun., 2012, 3(1), p 890.10.1038/ncomms1891 ↗

33. D. Wang, X. Zhao, Y. Lin et al., Nanoscale Coaxial Focused Electrohydrodynamic Jet Printing, Nanoscale, 2018, 10(21), p 9867–9879.10.1039/C8NR01001C ↗

34. K. Sugioka and Y. Cheng, Femtosecond Laser Three-Dimensional Micro- and Nanofabrication, Appl. Phys. Rev., 2014, 1(4), p 041303.10.1063/1.4904320 ↗

35. X. Zhou, W. Guo, Q. Sun et al., Laser Writing of Cu-Ag Alloy Flexible Electrodes with Excellent Oxidation and Electrochemical Migration Resistances, ACS Appl. Electron. Mater., 2023, 5(7), p 3780–3789.10.1021/acsaelm.3c00509 ↗

36. X. Zhou, W. Guo, J. Fu et al., Laser Writing of Cu/Cu O Integrated Structure on Flexible Substrate for Humidity Sensing, Appl. Surf. Sci., 2019, 494, p 684–690.10.1016/j.apsusc.2019.07.159 ↗

37. X. Zhou, W. Guo, Y. Yao et al., Flexible Nonenzymatic glucose Sensing with One‐Step Laser‐Fabricated Cu2O/Cu Porous Structure, Adv. Eng. Mater., 2021, 23(6), p 2100192.10.1002/adem.202100192 ↗

38. A. Hanss, M. Schmid, S.K. Bhogaraju, F. Conti, and G. Elger, G Reliability of Sintered and Soldered High Power Chip Size Packages and Flip Chip LEDs. 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), 2080–2088 201810.1109/ECTC.2018.00312 ↗

39. R.K. Khirotdin, M.F. Suhaimi, O.M.F. Marwah, R.H.A. Haq, M. Ibrahim, S. Hassan, N. Saude, M.S. Wahab, N. Hassan, and L.P. Huat, Investigation of Curing Silver Conductive Ink Printed on Polymer Substrate Using Halogen Lamp, AIP Conf. Proc., 2023, 2808, p 040013.10.1063/5.0121027 ↗