Effect of Hot Stamping Pressure on the Microstructure, Corrosion Resistance, and Wear Resistance of Selective Laser Melting Fabricated Ti6Al4V

1. S. Cao, Y. Zou, C.V.S. Lim, and X. Wu, Review of Laser Powder Bed Fusion (LPBF) Fabricated Ti-6Al-4V: Process, Post-Process Treatment, Microstructure, and Property, Light Adv. Manuf., 2021, 2(3), p 313–332. https://doi.org/10.37188/lam.2021.02010.37188/lam.2021.020 ↗

2. H.D. Nguyen et al., A Critical Review on Additive Manufacturing of Ti-6Al-4V Alloy: Microstructure and Mechanical Properties, J. Mater. Res. Technol., 2022, 18, p 4641–4661. https://doi.org/10.1016/j.jmrt.2022.04.05510.1016/j.jmrt.2022.04.055 ↗

3. F. Yang, J. Li, J. Shi, X. Zhang, and Y. Li, Laser Beam Melting 3D Printing of Ti6Al4V Based Porous Structured Dental Implants: Fabrication, Biocompatibility Analysis and Photoelastic Study, Sci. Rep., 2017, 7, p 45360. https://doi.org/10.1038/srep4536010.1038/srep45360 ↗

4. M. Meng et al., 3D Printing Metal Implants in Orthopedic Surgery: Methods, Applications and Future Prospects, J. Orthop. Transl., 2023, 42, p 94–112. https://doi.org/10.1016/j.jot.2023.08.00410.1016/j.jot.2023.08.004 ↗

5. G.M. Ter Haar and T.H. Becker, Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties, Materials, 2018, 11(1), 146. https://doi.org/10.3390/ma1101014610.3390/ma11010146 ↗

6. E. Marin and A. Lanzutti, Biomedical Applications of Titanium Alloys: A Comprehensive Review, Materials, 2023, 17(1), 114. https://doi.org/10.3390/ma1701011410.3390/ma17010114 ↗

7. F.R. Kaschel, M. Celikin, and D.P. Dowling, Effects of laser power on geometry, microstructure and mechanical properties of printed Ti-6Al-4V parts, Research Repository UCD. Available at: https://researchrepository.ucd.ie/entities/publication/edcb4a8a-9fe2-4ffc-bdb9-f6bbae91873f (2020) Accessed: 1 Dec 2025

8. N. Baskin and C. Yuce, Effect of Process Parameters On The Mechanical Behavior of Ti-6Al-4V Alloys Fabricated By Laser Powder Bed Fusion Method, J. Mater. Res. Technol., 2024, 30, p 7006–7019. https://doi.org/10.1016/j.jmrt.2024.05.08410.1016/j.jmrt.2024.05.084 ↗

9. L. Thijs et al., A study of the Microstructural Evolution during Selective Laser Melting of Ti-6Al-4V, Acta Mater., 2010, 58(9), p 3303–3312. https://doi.org/10.1016/j.actamat.2010.02.00410.1016/j.actamat.2010.02.004 ↗

10. P.A. Kobryn and S.L. Semiatin, The laser Additive Manufacture of Ti-6Al-4V, JOM, 2001, 53(9), p 40–42. https://doi.org/10.1007/s11837-001-0013-x10.1007/s11837-001-0013-x ↗

11. M. Simonelli, Y.Y. Tse, and C. Tuck, Microstructure of Ti-6Al-4V Produced by Selective Laser Melting, J. Phys: Conf. Ser., 2012, 371(1), 012084. https://doi.org/10.1088/1742-6596/371/1/01208410.1088/1742-6596/371/1/012084 ↗

12. S. Li et al., The effect of Laser Scan Strategy on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted Ti-6Al-4V, J. Mater. Process. Technol., 2016, 229, p 128–138. https://doi.org/10.1016/j.jmatprotec.2015.09.00910.1016/j.jmatprotec.2015.09.009 ↗

13. B. Zhang et al., Corrosion Behaviour of Selective Laser Melted Ti-6Al-4V Alloy in NaCl Solution, Corros. Sci., 2019, 157, p 168–182. https://doi.org/10.1016/j.corsci.2019.05.02710.1016/j.corsci.2019.05.027 ↗

14. M. Zhang et al., Effect of Porosity and Surface Defects on the Wear and Corrosion Resistance of Selective Laser Melted Ti-6Al-4V, Tribol. Int., 2022, 168, p 107451. https://doi.org/10.1016/j.triboint.2022.10745110.1016/j.triboint.2022.107451 ↗

15. X. Shen et al., Cecropin B Loaded TiO2 Nanotubes Coated with Hyaluronidase Sensitive Multilayers for Reducing Bacterial Adhesion, Mater. Design, 2016, 92, p 1007–1017. https://doi.org/10.1016/j.matdes.2015.12.08310.1016/j.matdes.2015.12.083 ↗

16. C. Kei, et al. Corrosion and mechanical properties of atomic layer deposited TiO2 coatings on NiTi implants, in 2016 IEEE International conference on industrial technology (ICIT). (Taipei, Taiwan: IEEE), pp. 1328–1332. 2016 Available at: https://doi.org/10.1109/ICIT.2016.7474945.10.1109/ICIT.2016.7474945 ↗

17. D. Bociąga et al., Surface Characterization and Biological Evaluation of Silver-Incorporated DLC Coatings Fabricated by hybrid RF PACVD/MS Method, Mater. Sci. Eng.: C, 2016, 63, p 462–474. https://doi.org/10.1016/j.msec.2016.03.01210.1016/j.msec.2016.03.012 ↗

18. D. Choudhury et al., A Novel Tribological study on DLC-Coated Micro-Dimpled Orthopedics Implant Interface, J. Mech. Behavior Biomed. Mater., 2015, 45, p 121–131. https://doi.org/10.1016/j.jmbbm.2015.01.01810.1016/j.jmbbm.2015.01.018 ↗

19. P. Saravanan et al., Optimization of Wear Parameters And Their Relative Effects on TiN Coated Surface Against Ti6Al4V Alloy, Mater. Design, 2016, 92, p 23–35. https://doi.org/10.1016/j.matdes.2015.12.01210.1016/j.matdes.2015.12.012 ↗

20. P. Saravanan et al., Optimizing Wear behavior of TiN Coated SS 316L Against Ti Alloy Using Response Surface Methodology, Mater. Design, 2015, 67, p 469–482. https://doi.org/10.1016/j.matdes.2014.11.05010.1016/j.matdes.2014.11.050 ↗

21. M. Kot et al., The Tribological Phenomena of a New Type of TiN/a-C: H Multilayer Coatings, Mater. Design, 2013, 51, p 280–286. https://doi.org/10.1016/j.matdes.2013.04.02810.1016/j.matdes.2013.04.028 ↗

22. V. Oliveira et al., Protective Effect of Plasma-Assisted PVD Deposited Coatings on Ti-6Al-4V Alloy in NaCl Solutions, Mater. Design, 2015, 88, p 1334–1341. https://doi.org/10.1016/j.matdes.2015.09.11610.1016/j.matdes.2015.09.116 ↗

23. K.-T. Rie et al., Plasma Surface Treatment and PACVD on Ti Alloys for Surgical Implants, Surf. Coat. Technol., 1995, 74–75, p 973–980. https://doi.org/10.1016/0257-8972(95)02367-410.1016/0257-8972(95)02367-4 ↗

24. C.-H. Hsu, C.-Y. Lin, and J.-X. Chen, Wear and Corrosion Performance of Ti-6Al-4V Alloy Arc-Coated TiN/CrN Nano-Multilayer Film, Metals, 2023, 13(5), 907. https://doi.org/10.3390/met1305090710.3390/met13050907 ↗

25. C. Zheng et al., Great Enhancement in Corrosion Resistance of Ti Alloy by Mo Element Regulating β Grain Boundary and Microstructure, Corros. Sci., 2025, 256, 113237. https://doi.org/10.1016/j.corsci.2025.11323710.1016/j.corsci.2025.113237 ↗

26. Z. Mukhtar, A. Dey, and N. Kundan, Optimized Surface Engineering of Ti-6Al-4V: Comprehensive Coating Evaluation for Biomedical Applications, Surf. Interfaces, 2025, 56, 105735. https://doi.org/10.1016/j.surfin.2024.10573510.1016/j.surfin.2024.105735 ↗

27. A.T. Le et al., Heat Treatment of Ti6Al4V Alloy Fabricated by Selective Laser Melting (SLM) for Medical Implant: a Comprehensive Review, J. Mater. Res. Technol., 2025, 36, p 7643–7665. https://doi.org/10.1016/j.jmrt.2025.04.14310.1016/j.jmrt.2025.04.143 ↗

28. Q. Jiang et al., Effects of Laser Shock Peening on the Ultra-High Cycle Fatigue Performance of Additively Manufactured Ti6Al4V Alloy, Opt. Laser Technol., 2021, 144, 107391. https://doi.org/10.1016/j.optlastec.2021.10739110.1016/j.optlastec.2021.107391 ↗

29. H.S. Liu et al., Effect of Hot Stamping Parameters on the Mechanical Properties and Microstructure of Cold-Rolled 22MnB5 Steel Strips, Int. J. Miner. Metal. Mater., 2014, 21(6), p 544–555. https://doi.org/10.1007/s12613-014-0940-210.1007/s12613-014-0940-2 ↗

30. W. Ma et al., Hot Deformation Behavior and Microstructure Evolution Mechanisms of Ti6Al4V Alloy under Hot Stamping Conditions, Materials, 2024, 17(11), p 2531.10.3390/ma17112531 ↗

31. Y. Liu et al., The Effect of Rapid Resistance Heating on Microstructure and Hydrogen Embrittlement of Ultra-High-Strength Hot Stamping Steel, Mater. Sci. Eng., A, 2025, 947, 149213. https://doi.org/10.1016/j.msea.2025.14921310.1016/j.msea.2025.149213 ↗

32. M. Kopec et al., Formability and Microstructure Evolution Mechanisms of Ti6Al4V Alloy during a Novel Hot Stamping Process, Mater. Sci. Eng.: A, 2018, 719, p 72–81. https://doi.org/10.1016/j.msea.2018.02.04010.1016/j.msea.2018.02.040 ↗

33. W.K. Li, L.H. Zhan, and J. Zhao, Effect of Hot Stamping Process on Forming Quality of 6061 Aluminum alloy U-Shaped Parts, Chin. J. Nonferrous Metals, 2016, 26(6), p 1166–1173.

34. X. Ding et al., Enhancing the Corrosion Resistance of Selective Laser Melting Ti6Al4V Alloy by Hot Stamping Post-Treatment, Mater. Lett., 2025, 397, 138864. https://doi.org/10.1016/j.matlet.2025.13886410.1016/j.matlet.2025.138864 ↗

35. H. Wang et al., Formation of a Transition V-rich Structure during the α’ to α + β Phase Transformation Process in Additively Manufactured Ti-6Al-4 V, Acta Mater., 2022, 235, 118104. https://doi.org/10.1016/j.actamat.2022.11810410.1016/j.actamat.2022.118104 ↗

36. H. Peng et al., Comparative Study of Anti-Corrosion Properties of Different Types of Press-Hardened Steels, Materials, 2024, 17(5), 1022. https://doi.org/10.3390/ma1705102210.3390/ma17051022 ↗

37. M. Najafizadeh et al., Classification and Applications of Titanium and its Alloys: A Review, J. Alloys Comp. Commun., 2024, 3, 100019.