Deposit Formation Characteristics, Microstructure, and Mechanical Properties of the 304 Stainless Steel Fabricated by Activated Two-GTA-based Additive Manufacturing

1. A. Paskual, P. Alvarez, and A. Suarez, Study on Arc Welding Processes for High Deposition Rate Additive Manufacturing, Procedia CIRP, 2018, 68, p 358–362. https://doi.org/10.1016/j.procir.2017.12.09510.1016/j.procir.2017.12.095 ↗

2. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P. Colegrove, Wire and Arc Additive Manufacturing, Mater. Sci. Technol., 2016, 32(7), p 641–647. https://doi.org/10.1179/1743284715y.000000007310.1179/1743284715y.0000000073 ↗

3. C.R. Cunningham, J.M. Flynn, A. Shokrani, V. Dhokia, and S.T. Newman, Invited Review Article: Strategies and Processes for High Quality Wire Arc Additive Manufacturing, Addit. Manuf., 2018, 22, p 672–686. https://doi.org/10.1016/j.addma.2018.06.02010.1016/j.addma.2018.06.020 ↗

4. A. Bandyopadhyay and K.D. Traxel , Invited Review Article: Metal-Additive Manufacturing Modeling Strategies for Application-Optimized Designs. Additive Manufacturing, 2018, 22, p 758–774.10.1016/j.addma.2018.06.024 ↗

5. K.U. Rani, R. Kumar, M.M. Mahapatra et al., Wire Arc Additive Manufactured Mild Steel and Austenitic Stainless Steel Components: Microstructure, Mechanical Properties and Residual Stresses, Materials, 2022, 15(20), 7094. https://doi.org/10.3390/ma1520709410.3390/ma15207094 ↗

6. D.H. Ding, Z.X. Pan, D. Cuiuri, and H. Li, Wire-feed Additive Manufacturing of Metal Components: Technologies, Developments and Future Interests, Int. J. Adv. Manuf. Technol., 2015, 81(1), p 465–481. https://doi.org/10.1007/s00170-015-7077-310.1007/s00170-015-7077-3 ↗

7. C. Shen, Z. Pan, D. Cuiuri, and H. Li, Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-arc Additive Manufacturing Process, Metall. Mater. Trans. B, 2016, 47(1), p 763–772. https://doi.org/10.1007/s11663-015-0509-510.1007/s11663-015-0509-5 ↗

8. F. Wang, S. Williams, P. Colegrove, and A.A. Antonysamy, Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V, Metall. Mater. Trans. A, 2013, 44(2), p 968–977. https://doi.org/10.1007/s11661-012-1444-610.1007/s11661-012-1444-6 ↗

9. J.Y. Bai, C.L. Fan, C.L. Yang, and B.L. Dong, Effects of Thermal Cycles on Microstructure Evolution of 2219-Al During GTA-additive Manufacturing, Int. J. Adv. Manuf. Technol., 2016, 87(9), p 2615–2623. https://doi.org/10.1007/s00170-016-8633-110.1007/s00170-016-8633-1 ↗

10. B. Baufeld, O. Van der Biest, and R. Gault, Additive Manufacturing of Ti–6Al–4V Components by Shaped Metal Deposition: Microstructure and Mechanical Properties, Mater. Des., 2010, 31, p S106–S111. https://doi.org/10.1016/j.matdes.2009.11.03210.1016/j.matdes.2009.11.032 ↗

11. B. Baufeld and O. Van der Biest, Mechanical Properties of Ti-6Al-4V Specimens Produced by Shaped Metal Deposition, Sci. Technol. Adv. Mater., 2009 https://doi.org/10.1088/1468-6996/10/1/01500810.1088/1468-6996/10/1/015008 ↗

12. T. Skiba, B. Baufeld, and O. Van der Biest, Microstructure and Mechanical Properties of Stainless Steel Component Manufactured by Shaped Metal Deposition, ISIJ Int., 2009, 49(10), p 1588–1591. https://doi.org/10.2355/isijinternational.49.158810.2355/isijinternational.49.1588 ↗

13. T. Skiba, B. Baufeld, and O. Van der Biest, Shaped Metal Deposition of 300M Steel, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 2011, 225(6), p 831–839. https://doi.org/10.1177/09544054jem211510.1177/09544054jem2115 ↗

14. L. Zhu, J. Li, Y. Luo, C. Zhang, J. Xu, and D. Chen, Characteristics of Metal Droplet Transfer in Wire-arc Additive Manufacturing of Aluminum Alloy, Int. J. Adv. Manuf. Technol., 2018, 99(5), p 1521–1530. https://doi.org/10.1007/s00170-018-2604-710.1007/s00170-018-2604-7 ↗

15. X.S. Leng, G.J. Zhang, and L. Wu, Experimental Study on Improving Welding Efficiency of Twin Electrode TIG Welding Method, Sci. Technol. Weld. Join., 2006, 11(5), p 550–554. https://doi.org/10.1179/174329306x12278510.1179/174329306x122785 ↗

16. E. Aldalur, F. Veiga, A. Suárez, J. Bilbao and A. Lamikiz, High Deposition Wire Arc Additive Manufacturing of Mild Steel: Strategies and Heat Input Effect on Microstructure and Mechanical Properties, J. Manuf. Process., 2020, 58, p 615–626. https://doi.org/10.1016/j.jmapro.2020.08.06010.1016/j.jmapro.2020.08.060 ↗

17. E. Spaniol, T. Ungethüm, M. Trautmann, K. Andrusch, M. Hertel, and U. Füssel, Development of a Novel TIG Hot-Wire Process for Wire and Arc Additive Manufacturing, Weld. World, 2020, 64(8), p 1329–1340. https://doi.org/10.1007/s40194-020-00871-w10.1007/s40194-020-00871-w ↗

18. N. Rodriguez, L. Vázquez, I. Huarte, E. Arruti, I. Tabernero, and P. Alvarez, Wire and Arc Additive Manufacturing: A Comparison Between CMT and TopTIG Processes Applied to Stainless Steel, Weld. World, 2018, 62(5), p 1083–1096. https://doi.org/10.1007/s40194-018-0606-610.1007/s40194-018-0606-6 ↗

19. X. Zhang, K. Wang, Q. Zhou, J. Ding, S. Ganguly, G. Marzio, D. Yang, X. Xu, P. Dirisu, and S.W. Williams, Microstructure and Mechanical Properties of TOP-TIG-Wire and Arc Additive Manufactured Super Duplex Stainless Steel (ER2594), Mater. Sci. Eng. A, 2019, 762, 138097. https://doi.org/10.1016/j.msea.2019.13809710.1016/j.msea.2019.138097 ↗

20. O. Yilmaz and A.A. Ugla, Microstructure Characterization of SS308LSi Components Manufactured by GTAW-based Additive Manufacturing: Shaped Metal Deposition Using Pulsed Current Arc, Int. J. Adv. Manuf. Technol., 2017, 89(1), p 13–25. https://doi.org/10.1007/s00170-016-9053-y10.1007/s00170-016-9053-y ↗

21. X. Leng, G. Zhang, and L. Wu, The Characteristic of Twin-electrode TIG Coupling Arc Pressure, J. Phys. D Appl. Phys., 2006, 39(6), p 1120. https://doi.org/10.1088/0022-3727/39/6/01710.1088/0022-3727/39/6/017 ↗

22. Q. Han, D. Li, H. Sun, and G. Zhang, Forming characteristics of additive manufacturing process by twin electrode gas tungsten arc, Int. J. Adv. Manuf. Technol., 2019, 104(9), p 4517–4526. https://doi.org/10.1007/s00170-019-04314-910.1007/s00170-019-04314-9 ↗

23. T.C. Nguyen, D.C. Weckman, D.A. Johnson, and H.W. Kerr, High Speed Fusion Weld Bead Defects, Sci. Technol. Weld. Join., 2006, 11(6), p 618–633. https://doi.org/10.1179/174329306X12846410.1179/174329306X128464 ↗

24. J. Zhang, P.Z. Shao, X.X. Wang, and D. Fan, Improving Weld Penetration by Two-TIG Arc Activated Via Mixing Oxygen into Shielding Gas, Int. J. Adv. Manuf. Technol., 2023, 125(1–2), p 169–181. https://doi.org/10.1007/s00170-022-10703-410.1007/s00170-022-10703-4 ↗

25. X. Wang, Y. Deng, J. Zhang, and H. He, Measurement and Analysis of Arc Pressure in Two-TIG Welding, Weld. Int., 2024, 38(3), p 198–210. https://doi.org/10.1080/09507116.2024.231227510.1080/09507116.2024.2312275 ↗

26. P. Sahoo, T. Debroy, and M.J. McNallan, Surface Tension of Binary Metal—Surface Active Solute Systems Under Conditions Relevant to Welding Metallurgy, Metall. Trans. B, 1988, 19, p 483–491. https://doi.org/10.1007/BF0265774810.1007/BF02657748 ↗

27. X. Meng, G. Qin, and Z. Zou, Investigation of Hump Defect in High Speed Gas Tungsten Arc Welding by Numerical Modelling, Mater. Des., 2016, 94, p 69–78.10.1016/j.matdes.2016.01.019 ↗

28. T.L. Le and D.S. Mai, Microstructural and Mechanical Characteristics of 308L Stainless Steel Manufactured by Gas Metal arc Welding-based Additive Manufacturing, Mater. Lett., 2020, 271, 127791. https://doi.org/10.1016/j.matlet.2020.12779110.1016/j.matlet.2020.127791 ↗

29. V. Laghi, M. Palermo, G. Gasparini et al., Experimental Results for Structural Design of Wire-and-arc Additive Manufactured Stainless Steel Members, J. Constr. Steel Res., 2020, 167, 105858. https://doi.org/10.1016/j.jcsr.2019.10585810.1016/j.jcsr.2019.105858 ↗

30. X. Wang, S. Tashiro, M. Tanaka, and N.Q. Trinh, Numerical Investigation of the Arc Behaviour and Air Transport During Pulsed Tungsten Inert Gas Arc-Based Additive manufacturing, Int. J. Adv. Manuf. Technol., 2023, 128(11), p 5385–5403. https://doi.org/10.1007/s00170-023-12233-z10.1007/s00170-023-12233-z ↗

31. S. Kou, Welding Metallurgy, 2nd ed. John Wiley, USA, New Jersey, 2003

32. X. Wang, J. Huang, Y. Huang, D. Fan, and Y. Guo, Investigation of Heat Transfer and Fluid Flow in Activating TIG Welding by Numerical Modeling, Appl. Therm. Eng., 2017, 113, p 27–35.10.1016/j.applthermaleng.2016.11.008 ↗

33. K. Tseng and C. Hsu, Performance of Activated TIG Process in Austenitic Stainless Steel Welds, J. Mater. Process. Technol., 2011, 211(3), p 503–512. https://doi.org/10.1016/j.jmatprotec.2010.11.00310.1016/j.jmatprotec.2010.11.003 ↗

34. J.C. Lippold and D.J. Kotecki Welding Metallurgy and Weldability of Stainless Steel, John Wiley & Sons, 2005

35. C.J. Wang, T.G. Liu, P. Zhu, Y.H. Lu, and T.J. Shoji, Study on Microstructure and Tensile Properties of 316L Stainless Steel Fabricated by CMT Wire and Arc Additive Manufacturing, Mater. Sci. Eng. A, 2020, 796, 140006. https://doi.org/10.1016/j.msea.2020.14000610.1016/j.msea.2020.140006 ↗

36. Q. Wang, S. Zhang, C. Zhang, C. Wu, J. Wang, J. Chen, and Z. Sun, Microstructure Evolution and EBSD Analysis of a Graded Steel Fabricated by Laser Additive Manufacturing, Vacuum, 2017, 141, p 68–81. https://doi.org/10.1016/j.vacuum.2017.03.02110.1016/j.vacuum.2017.03.021 ↗

37. J.B. Sule, S. Ganguly, W. Suder, and T. Pirling, Effect of high-Pressure Rolling Followed by Laser Processing on Mechanical Properties, Microstructure and Residual Stress Distribution in Multi-Pass Welds of 304L Stainless Steel, Int. J. Adv. Manuf. Technol., 2016, 86, p 2127–2138. https://doi.org/10.1007/s00170-015-8299-010.1007/s00170-015-8299-0 ↗

38. Y. Ke and J. Xiong, Microstructure and Mechanical Properties of Double-wire Feed GTA Additive Manufactured 308L Stainless Steel, Rapid Prototyp. J., 2020, 26(9), p 1503–1513. https://doi.org/10.1108/RPJ-09-2019-023810.1108/RPJ-09-2019-0238 ↗

39. R.V. Stone, T.B. Cox, J.R. Low, and J.A. Psioda, Microstructural Aspects of Fracture by Dimpled Rupture, Int. Met. Rev., 1985, 30(4), p 157–180.

40. X.F. Xu, J.L. Ding, S. Ganguly, C. Diao, and S. Williams, Oxide Accumulation Effects on Wire Arc Layer-by-layer Additive Manufacture Process, J. Mater. Process. Technol., 2018, 252, p 739–750. https://doi.org/10.1016/j.jmatprotec.2017.10.03010.1016/j.jmatprotec.2017.10.030 ↗

41. W. Wu, J.X. Xue, and P. Yao, A Comparative Study on Single-and Double-arc Deposition Processes, Mater. Manuf. Processes, 2020, 35(3), p 346–353. https://doi.org/10.1080/10426914.2020.172694710.1080/10426914.2020.1726947 ↗

42. L.L. Wang, J.X. Xue, and Q. Wang, Correlation Between Arc Mode, Microstructure, and Mechanical Properties During Wire Arc Additive Manufacturing of 316L Stainless Steel, Mater. Sci. Eng. A, 2019, 751, p 183–190. https://doi.org/10.1016/j.msea.2019.02.07810.1016/j.msea.2019.02.078 ↗

43. Z. Lyu, Y.S. Sato, S. Tokita, Y. Zhao, J. Jia, and A. Wu, Homogenization of Microstructure and Mechanical Properties of Wire arc Additive Manufactured Martensitic Stainless Steel Through Optimization of Post-process Heat Treatment, J. Mater. Res. Technol., 2022, 21, p 2682–2692. https://doi.org/10.1016/j.jmrt.2022.10.07710.1016/j.jmrt.2022.10.077 ↗

44. J. Liu, X. Li, Y. Zhou, P. Yu, C. He, and Z. Xu, Microstructure and Mechanical Properties of Active Gas Arc Welding Between 304 Austenitic Stainless Steel and Q235B Low Carbon Steel, J. Mater. Eng. Perform., 2022, 31, p 8199–8209. https://doi.org/10.1007/s11665-022-06808-210.1007/s11665-022-06808-2 ↗

45. K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, and J.M. Schoenung, Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation-Strengthened Aluminum Alloy, Acta Mater., 2014, 62, p 141–155. https://doi.org/10.1016/j.actamat.2013.09.04210.1016/j.actamat.2013.09.042 ↗

46. X. Mao, S.H. Kang, T.K. Kim, S.C. Kim, K.H. Oh, and J. Jang, Microstructure and Mechanical Properties of Ultrafine-Grained Austenitic Oxide Dispersion Strengthened Steel, Metall. Mater. Trans. A, 2016, 47(11), p 5334–5343. https://doi.org/10.1007/s11661-016-3570-z10.1007/s11661-016-3570-z ↗

47. Z. Zhang and D.L. Chen, Consideration of Orowan Strengthening Effect in Particulate-Reinforced Metal Matrix Nanocomposites: A Model for Predicting Their Yield Strength, Scripta Mater., 2006, 54(7), p 1321–1326. https://doi.org/10.1016/j.scriptamat.2005.12.01710.1016/j.scriptamat.2005.12.017 ↗

48. A. Afshar and A. Simchi, Flow Stress Dependence on the Grain Size in Alumina Dispersion-Strengthened Copper with a Bimodal Grain Size Distribution, Mater. Sci. Eng. A, 2009, 518(1–2), p 41–46. https://doi.org/10.1016/j.msea.2009.04.02210.1016/j.msea.2009.04.022 ↗

49. W.S. Miller and F.J. Humphreys, Strengthening Mechanisms in Particulate Metal matrix Composites, Scripta Metall. Mater., 1991, 25(1), p 33–38.10.1016/0956-716X(91)90349-6 ↗

50. M. Takeda, T. Onishi, S. Nakakubo, and S. Fujimoto, Physical Properties of Iron-oxide Scales on Si-containing Steels at High Temperature, Mater. Trans., 2009, 50(9), p 2242–2246. https://doi.org/10.2320/matertrans.M200909710.2320/matertrans.M2009097 ↗

51. Y. Chen, H. Zhu, P. Zhang, Z. Wang, M. Wang, G. Sha, H. Lin, J. Ma, Z. Zhang, Y. Song, and P. Zheng, An Exceptionally Strong, Ductile and Impurity-Tolerant Austenitic Stainless Steel Prepared by Laser Additive Manufacturing, Acta Mater., 2023, 250, 118868. https://doi.org/10.1016/j.actamat.2023.11886810.1016/j.actamat.2023.118868 ↗

52. Guo L, Hu B, Liu A, Jia C, and Li H (2013) Strengthening Mechanisms of Oxide Dispersion Strengthened Steel. Chinese Journal of Engineering.35(5), p 586–91.

53. Leffers T and Pedersen OB. The Strength of Polycrystals. Strength of Metals and Alloys (ICSMA 6), 1982 ,pp. 75-82. Pergamon.10.1016/B978-1-4832-8423-1.50017-1 ↗

54. G. Wang, Y. Zhang, J. Liu, W. Chen, K. Wang, B. Cui, B. Zou, Q. Ouyang, Y. Zhang, Z. Hu, and L. Wang, Dispersion Hardening Using Amorphous Nanoparticles Deployed Via Additive Manufacturing, Nat. Commun., 2025, 16(1), 3589. https://doi.org/10.1038/s41467-025-58893-110.1038/s41467-025-58893-1 ↗

55. S. Peng, Y. Wei, and H. Gao, Nanoscale Precipitates as Sustainable Dislocation Sources for Enhanced Ductility and High Strength, Proc. Natl. Acad. Sci. U. S. A., 2020, 117(10), p 5204–5209.10.1073/pnas.1914615117 ↗

56. C. Pandey, N. Saini, M.M. Mahapatra, and P. Kumar, Study of the fracture Surface Morphology of Impact and Tensile Tested Cast and Forged (C&F) Grade 91 Steel at Room Temperature for Different Heat Treatment Regimes, Eng. Fail. Anal., 2017, 71, p 131–147. https://doi.org/10.1016/j.engfailanal.2016.06.01210.1016/j.engfailanal.2016.06.012 ↗

57. J. Llorca and C. Gonzalez, Microstructural Factors Controlling the Strength and Ductility of Particle-Reinforced Metal-Matrix Composites, J. Mech. Phys. Solids, 1998, 46(1), p 1–28. https://doi.org/10.1016/S0022-5096(97)00038-010.1016/S0022-5096(97)00038-0 ↗

58. S.H. Chen and T.C. Wang, Size Effects in the Particle-reinforced Metal-Matrix Composites, Acta Mech., 2002, 157(1), p 113–127. https://doi.org/10.1007/BF0118215810.1007/BF01182158 ↗

59. X. Wang, H. He, H. Xu, S. Tashiro, and M. Tanaka, Achieving Deep Penetration Welding of Nitrogen-Containing Stainless Steel Using two-GTA Doped with Oxygen and Nitrogen, J. Manuf. Process., 2025, 153, p 82–98. https://doi.org/10.1016/j.jmapro.2025.08.07310.1016/j.jmapro.2025.08.073 ↗

60. O.H. Nestor, Heat Intensity and Current Density Distributions at the Anode of High Current, Inert Gas Arcs, J. Appl. Phys., 1962, 33(5), p 1638–1648. https://doi.org/10.1063/1.172880310.1063/1.1728803 ↗

61. S.Y. Lee and S.J. Na, A Numerical Analysis of a Stationary Gas Tungsten Welding Arc Considering Various Electrode Angles, Weld. J., 1996, 75(9), p 269s.

62. P.F. Mendez and T.W. Eagar, Penetration and Defect Formation in high current Arc Welding, Weld. J., 2003, 82, p 296s–306s.

63. X. Wang, Y. Luo, and D. Fan, Investigation of Heat Transfer and Fluid Flow in High Current GTA Welding by a Unified Model, Int. J. Therm. Sci., 2019, 142, p 20–29. https://doi.org/10.1016/j.ijthermalsci.2019.04.00510.1016/j.ijthermalsci.2019.04.005 ↗

64. S. Lu, H. Fujii, and K. Nogi, Marangoni Convection and Weld Shape Variations in Ar–O2 and Ar–CO2 Shielded GTA Welding, Mater. Sci. Eng. A, 2004, 380, p 290–297. https://doi.org/10.1016/j.msea.2004.05.05710.1016/j.msea.2004.05.057 ↗

65. X. Wang, J. Zhang, S. Tashiro, and M. Tanaka, Study of Molten Pool Dynamics in Keyhole TIG Welding by Numerical Modelling, J. Manuf. Process., 2024, 15(119), p 827–841. https://doi.org/10.1016/j.jmapro.2024.03.11310.1016/j.jmapro.2024.03.113 ↗