Effect of TiC on Microstructure and Properties of Laser-Cladded Cobalt-Based Ceramic Coatings on High-Speed Steel

1. N. Kawasegi, H. Sugimori, H. Morimoto, N. Morita, and I. Hori, Development of Cutting Tools with Microscale and Nanoscale Textures to Improve Frictional Behavior, Precis. Eng., 2009, 33(3), p 248–254. https://doi.org/10.1016/j.precisioneng.2008.07.00510.1016/j.precisioneng.2008.07.005 ↗

2. D.L. Tian, X. Liu, L.W. Hu, F.S. Qu, J.F. Li, G.M. Le, X.S. Yang, Y.Z. Zhou, L. Qi, and D. Wang, Microstructure Evolution and Wear Resistance of Laser-Clad M2 High-Speed Steel Coatings, JOM, 2021, 73(12), p 4279–4288. https://doi.org/10.1007/s11837-021-04772-110.1007/s11837-021-04772-1 ↗

3. T. Sugihara and T. Enomoto, Performance of Cutting Tools with Dimple Textured Surfaces: A Comparative Study of Different Texture Patterns, Precis. Eng., 2017, 49, p 52–60. https://doi.org/10.1016/j.precisioneng.2017.01.00910.1016/j.precisioneng.2017.01.009 ↗

4. Y. Lin, Y. Bai, G. Xu, and H. Li, Improving Bonding Strength Between Steel and Wood Based on Laser Surface Texture, China Surf. Eng., 2024, 37(01), p 216–224. https://doi.org/10.11933/j.issn.1007-9289.2023011000110.11933/j.issn.1007-9289.20230110001 ↗

5. Y.H. Çelik, E. Kilickap, and M. Güney, Investigation of Cutting Parameters Affecting on Tool Wear and Surface Roughness in Dry Turning of Ti-6Al-4V Using CVD and PVD Coated Tools, J. Braz. Soc. Mech. Sci. Eng., 2017, 39(6), p 2085–2093. https://doi.org/10.1007/s40430-016-0607-610.1007/s40430-016-0607-6 ↗

6. L.Y. Wu, L.C. Qiu, Y. Du, F.F. Zeng, Q. Lu, Z.P. Tan, L. Yin, L.Y. Chen, and J.F. Zhu, Structure and Mechanical Properties of PVD and CVD TiAlSiN Coatings Deposited on Cemented Carbide, Crystals, 2021, 11(6), p 598. https://doi.org/10.3390/cryst1106059810.3390/cryst11060598 ↗

7. J. Zhang, K. Song, M. Zhang, Z. Zhao, Q. He, and Z. Li, Development Trend of High Performance Ceramic Coatings and Preparation Technologies, Surf. Technol., 2017, 46(12), p 96–103. https://doi.org/10.16490/j.cnki.issn.1001-3660.2017.12.01710.16490/j.cnki.issn.1001-3660.2017.12.017 ↗

8. Y.B. Du, H.X. Chen, Z.Q. Li, and Q. Liang, Effect of WC Content on the Wear Resistance of WC/Ni60 Composite Coatings on 35CrMoV Steel by Laser Cladding, J. Mater. Eng. Perform., 2025, 34(22), p 26285–26297. https://doi.org/10.1007/s11665-025-11202-910.1007/s11665-025-11202-9 ↗

9. L.J. Yang, S.P. Wang, P. Wang, H. Li, H.Y. Yang, Y.S. Ye, and Z.X. Li, Microstructural Evolution and Abrasive Resistance of WC7Co Ceramic Particle-Reinforced Ti6Al4V Composite Coating Prepared by Pulse Laser Cladding, J. Iron. Steel Res. Int., 2020, 27(2), p 228–237. https://doi.org/10.1007/s42243-019-00359-y10.1007/s42243-019-00359-y ↗

10. W.Y. Yuan, R.F. Li, Z.H. Chen, J.Y. Gu, and Y.T. Tian, A Comparative Study on Microstructure and Properties of Traditional Laser Cladding and High-Speed Laser Cladding of Ni45 Alloy Coatings, Surf. Coat. Technol., 2021, 405, p 126582. https://doi.org/10.1016/j.surfcoat.2020.12658210.1016/j.surfcoat.2020.126582 ↗

11. Q.T. Yang, G.H. Chen, T. Li, J.W. Liu, J.F. Gou, Y.K. Zhang, J.B. Guo, G.B. Tan, Y. Wang, and R.Y. Li, Effects of TiC on the Microstructure, Mechanical Properties, and Wear Behavior of E690 Steel Prepared by Laser Cladding, Tribol. Trans., 2023, 66(6), p 1153–1168. https://doi.org/10.1080/10402004.2023.227568010.1080/10402004.2023.2275680 ↗

12. Y. Zhou, X. Liu, W. Bu, and F. He, Microstructure and Wear Properties of Laser Cladding SiC/Ni-Cu Coating on Tool Surface, Appl. Laser., 2022, 42(07), p 8–14. https://doi.org/10.14128/j.cnki.al.20224207.00810.14128/j.cnki.al.20224207.008 ↗

13. H.X. Liu, T. Dong, X.W. Zhang, Z.F. Liu, and H. Shi, Microstructure and Cutting Performance of WC/Co50/Al Cemented Carbide Coated Tools Fabricated by Laser Cladding Process, Chin. J. Lasers, 2017, 44(08), p 104–112. https://doi.org/10.3788/CJL201744.080200210.3788/CJL201744.0802002 ↗

14. J. Zheng, Y. Lin, and J. Zuo, Flank Wear Mechanism in Intermittent Machining of Beryllium Copper Alloy, Surf. Technol., 2020, 49(3), p 319–326. https://doi.org/10.16490/j.cnki.issn.1001-3660.2020.03.04010.16490/j.cnki.issn.1001-3660.2020.03.040 ↗

15. W. Hua, Y. Liu, P. Li, and X. Qiu, Effect of Drill Coating and Edge Profile on Drilling Performance of PCB, Tool Eng., 2019, 53(12), p 9–13. https://doi.org/10.3969/j.issn.1000-7008.2019.12.00210.3969/j.issn.1000-7008.2019.12.002 ↗

16. N. Axén and K.-H. Zum Gahr, Abrasive Wear of TiC-Steel Composite Clad Layers on Tool Steel, Wear, 1992, 155(1), p 189–201. https://doi.org/10.1016/0043-1648(92)90197-G10.1016/0043-1648(92)90197-G ↗

17. Y. Zhang, F. Zhang, J. Xie, and F. Chen, Preparation and Performance Test of FeCrMoSi Laser Cladding Layer on 40Cr Tool, Mach. Des. Manuf., 2025 https://doi.org/10.19356/j.cnki.1001-3997.20250617.00110.19356/j.cnki.1001-3997.20250617.001 ↗

18. X. Chen, D. Zhang, W. Sun, Y. Wang, and J. Zhang, Microstructure and Red Hardness of WC/Co Coating on M2 High-speed Steel Cutter Surface Prepared by Laser Cladding, Surf. Technol., 2019, 48(11), p 236–243. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.11.02510.16490/j.cnki.issn.1001-3660.2019.11.025 ↗

19. Y. Zhang and Y. Li, Modification of High Speed Steel Surface with Laser Cladded AlTiN/NiCoCr Bilayers, Chin. J. Vac. Sci. Technol., 2020, 40(07), p 604–608. https://doi.org/10.13922/j.cnki.cjovst.2020.07.0210.13922/j.cnki.cjovst.2020.07.02 ↗

20. G.L. Hu, P. Shi, and L. Zhang, Microstructure and Machinability of Laser Cladding Co-WC on High Speedsteel Tools for Numerical Control Machine Tools, Laser Optoelectron. Prog., 2022, 59, p 350–357.

21. S.C. Yang, C.X. Cui, S. Cui, S.J. Liu, and Y.G. Liang, Microstructure and Mechanical Properties of In-Situ Dual Morphology Ti8C5/TiB2 Reinforced TiAl Composite, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2022 https://doi.org/10.1016/j.msea.2022.14291810.1016/j.msea.2022.142918 ↗

22. L. Huang, Y. Cao, G.H. Li, and Y.F. Wang, Microstructure Characteristics and Mechanical Behavior of a Selective Laser Melted Inconel 718 Alloy, J. Mater. Res. Technol., 2020, 9(2), p 2440–2454. https://doi.org/10.1016/j.jmrt.2019.12.07510.1016/j.jmrt.2019.12.075 ↗

23. H.Y. Zhang, Q. Zhang, H.W. Sun, M.Y. Gong, J. Wang, and Y. Liu, Solute Segregation and Pinning Effect on Lateral Twin Boundary in Magnesium, Metals, 2024, 14(8), p 942. https://doi.org/10.3390/met1408094210.3390/met14080942 ↗

24. J.F. Li, Z.C. Zhu, Y.X. Peng, and G. Shen, A Comparative Study on Microstructure Evolution and Wear Resistance of Different-Sized Tungsten Carbide Modified Fe-Based Laser Cladding Coatings, Opt. Laser Technol., 2022, 147, p 107672. https://doi.org/10.1016/j.optlastec.2021.10767210.1016/j.optlastec.2021.107672 ↗

25. M.T. Wu, S. Zhang, F.P. Wang, X.J. Shang, T.H. Liao, Y.X. Guo, Q.B. Liu, C.Q. Ma, B.T. Gong, P.Z. Wang, Y.A. Wu, and Y. Xiao, Laser Cladding Co-Cr-W-C Alloy Coatings on 5CrNiMo Die Steel to Achieve Excellent High-Temperature Wear Resistance, J. Mater. Res. Technol., 2026, 41, p 7653–7665. https://doi.org/10.1016/j.jmrt.2026.03.08910.1016/j.jmrt.2026.03.089 ↗

26. X.H. Wang, M. Zhang, and S.Y. Qu, Development and Characterization of (Ti, Mo)C Carbides Reinforced Fe-Based Surface Composite Coating Produced by Laser Cladding, Opt. Lasers Eng., 2010, 48(9), p 893–898. https://doi.org/10.1016/j.optlaseng.2010.03.01710.1016/j.optlaseng.2010.03.017 ↗

27. Y.T. Li, K.M. Wang, H.G. Fu, X.Y. Guo, and J. Lin, Microstructure and Wear Resistance of In-Situ TiC Reinforced AlCoCrFeNi-Based Coatings by Laser Cladding, Appl. Surf. Sci., 2022 https://doi.org/10.1016/j.apsusc.2022.15270310.1016/j.apsusc.2022.152703 ↗

28. Z.B. Meng, W. Liu, X. Lv, and C.Y. Zhou, Microstructure and Properties of (Ti, Cr) C Reinforced Novel Medium Manganese Steel, AIP Adv., 2021 https://doi.org/10.1063/5.004196610.1063/5.0041966 ↗

29. X. Tian, B. Chen, X. Yang, Y. Liu, K.Q. Wang, and Y.Q. Wang, Effect of WC Content on the Microstructure and Properties of WC/Ni60 Laser Cladding Layer, Chin. J. Lasers, 2025, 52(04), p 141–158. https://doi.org/10.3788/CJL24082410.3788/CJL240824 ↗

30. Y.S. Zheng, F.G. Liu, J.Y. Gao, F.C. Liu, C.P. Huang, H.Z. Zheng, P.F. Wang, and H. Qiu, Effect of Different Heat Input on the Microstructure and Mechanical Properties of Laser Cladding Repaired 300M Steel, J. Mater. Res. Technol., 2023, 22, p 556–568. https://doi.org/10.1016/j.jmrt.2022.11.15310.1016/j.jmrt.2022.11.153 ↗

31. W.M. Guo, Z.Q. Jia, G.Q. Liu, N. Ding, L. Liu, H.X. Xu, N. Xu, J.Q. He, F.M. Zaïri, and X.B. Wang, Effect of Post-cladding Heat Treatment on Microstructure and Performance of a Laser Cladded 2Cr17Ni2 Steel Coating, J. Mater. Eng. Perform., 2023, 32(4), p 1778–1789. https://doi.org/10.1007/s11665-022-07207-310.1007/s11665-022-07207-3 ↗

32. D.Z. Jiang, G.J. Wang, W. Dong, X.D. Hong, and C.G. Guo, Recent Advance on Metal Carbides Reinforced Laser Cladding Coatings, Molecules, 2025 https://doi.org/10.3390/molecules3008182010.3390/molecules30081820 ↗

33. H. Wang, Y. Du, X. Pei, and H.F. WANG, Tribological Property and Wear Mechanism of NbMoZrVSix Refractory High-Entropy Alloy Strengthened by Eutectic Structure, Acta Metall. Sin., 2024, 60(7), p 937–946. https://doi.org/10.11900/0412.1961.2022.0022310.11900/0412.1961.2022.00223 ↗

34. Q. Wang, Q. Li, L. Zhang, D.X. Chen, H. Jin, J.D. Li, J.W. Zhang, and C.Y. Ban, Microstructure and Properties of Ni-WC Gradient Composite Coating Prepared by Laser Cladding, Ceram. Int., 2022, 48(6), p 7905–7917. https://doi.org/10.1016/j.ceramint.2021.11.33810.1016/j.ceramint.2021.11.338 ↗