Structure, Mechanical, and Tribological Properties of Al-Sn-Pb Composites Prepared by Liquid Phase Sintering

1. Z. Zeng, Y. Li, H. Wang, R. Lai, J. Teng, and Y. Li, Tribological Behavior of AlSn20Cu Alloy Manufactured by Additive Friction Stir Deposition, Wear, 2025, 560–561, 205606. https://doi.org/10.1016/j.wear.2024.20560610.1016/j.wear.2024.205606 ↗

2. M. Xu, Y.G. Yin, C.M. Li, G.T. Zhang, and C.C. Duan, Effects of Macrosegregation on Mechanical and Tribological Properties of Squeeze Casting Immiscible Bearing Alloys, China Foundry, 2023, 20(2), p 443–451. https://doi.org/10.1007/s41230-023-2095-510.1007/s41230-023-2095-5 ↗

3. M.Q. Zeng, R.Z. Hu, K.Q. Song, and L.Y. Dai, Enhancement of Wear Properties of Ultrafine-Structured Al-Sn Alloy-Embedded Sn Nanoparticles through In Situ Synthesis, Tribol. Lett., 2019, 67, p 84. https://doi.org/10.1007/s11249-019-110.1007/s11249-019-1 ↗

4. V. Heydari, M. Alizadeh, and S. Pashangeh, Investigation into Microstructural and Mechanical Properties of Al-Sn Alloy Fabricated Using Accumulative Roll Bonding Combined with Heat Treatment, J. Mater. Res. Technol., 2023, 26, p 3481–3495. https://doi.org/10.1016/j.jmrt.2023.08.11910.1016/j.jmrt.2023.08.119 ↗

5. F. Bertelli, E.S. Freitas, N. Cheung, M. Arenas, A. Conde, J. Damborenea, and A. Garcia, Microstructure, Tensile Properties and Wear Resistance Correlations on Directionally Solidified Al-Sn-(Cu; Si) Alloys, J. Alloys Compd., 2017, 695, p 3621–3631. https://doi.org/10.1016/j.jallcom.2016.11.39910.1016/j.jallcom.2016.11.399 ↗

6. S. Huang, B. Zhu, Y. Zhang, H. Liu, S. Wu, and H. Xie, Microstructure Comparison for AlSn20Cu Antifriction Alloys Prepared by Semi-continuous Casting, Semi-solid Die Casting, and Spray Forming, Metals, 2022, 12(10), 1552. https://doi.org/10.3390/met1210155210.3390/met12101552 ↗

7. P. Podrabinnik, I. Gershman, A. Mironov, E. Kuznetsova, and P. Peretyagin, Mechanisms Involved in the Formation of Secondary Structures on the Friction Surface of Experimental Aluminum Alloys for Monometallic Journal Bearings, Lubricants, 2018, 6(4), p 104. https://doi.org/10.3390/lubricants604010410.3390/lubricants6040104 ↗

8. M. Sadawy, H. Metwally, H. Abd El-Aziz, A. Adbelkarim, W. Mohrez, H. Mashaal, and A. Kandil, The Role of Sn on Microstructure, Wear and Corrosion Properties of Al-5Zn-2.5Mg-1.6Cu-xSn Alloy, Mater. Res. Express, 2022, 9(9), 096507. https://doi.org/10.1088/2053-1591/ac8cd210.1088/2053-1591/ac8cd2 ↗

9. S. Li, Y. Li, H. Guo, Z. Wen, and Z. Zhu, Effect of Electromagnetic Stirring Frequency on Tribological Performance and Corrosion Resistance of Al-Sn Bearing Alloy, Mater. Today Commun., 2022, 32, 103898. https://doi.org/10.1016/j.mtcomm.2022.10389810.1016/j.mtcomm.2022.103898 ↗

10. C. Zhang, L. Li, Q. Jiang, C. Ma, Z. Yang, Y. Jin, and Q. Guan, The Impact of High Current Pulses Electron Beam on the Microstructure and Surface Properties of Sn/Al System, J. Alloys Compd., 2021, 861, 157980. https://doi.org/10.1016/j.jallcom.2020.15798010.1016/j.jallcom.2020.157980 ↗

11. N.A. Bushe, A.S. Gulyaev, V.A. Dvoskina, and K.M. Rakov, Bearings Made of Aluminum Alloys, Transport, Moscow, 1974.

12. E.J. Abed, Study of Solidification and Mechanical Properties of Al-Sn Casting Alloys, Asian Trans. Eng., 2012, 2, p 89–98.

13. N.M. Rusin, A.L. Skorentsev, and E.A. Kolubaev, Effect of Equal Channel Angular pressing on Mechanical and Tribological Properties of Sintered Al-Sn Composites, J. Mater. Eng. Perform., 2020, 29, p 1955–1963. https://doi.org/10.1007/s11665-020-04704-110.1007/s11665-020-04704-1 ↗

14. E.S. Freitas, A.P. Silva, J.E. Spinelli, L.C. Casteletti, and A. Garcia, Inter-Relation of Microstructural Features and Dry Sliding Wear Behavior of Monotectic Al-Bi and Al-Pb alloys, Tribol. Lett., 2014, 55, p 111–120. https://doi.org/10.1007/s11249-014-0338-810.1007/s11249-014-0338-8 ↗

15. J.W. Kaczmar, K. Naplocha, and J. Morgiel, Microstructure and Strength of Al2O3 and Carbon Fiber Reinforced 2024 Aluminum Alloy Composites, J. Mater. Eng. Perform., 2014, 23, p 2801–2808. https://doi.org/10.1007/s11665-014-1036-210.1007/s11665-014-1036-2 ↗

16. M.S. Kaiser and S.R. Ahmed, A study on the Quantitative Recrystallization of Cold Deformed Copper Affected by Tin-Lead Solder, Res. Eng. Struct. Mater., 2025, 11, p 333–349. https://doi.org/10.17515/resm2024.136ma1228rs10.17515/resm2024.136ma1228rs ↗

17. M.S. Kaiser, Results of Sn/Pb Solder Affected Aluminum under Wear Study, Res. Eng. Struct. Mater., 2024, 10, p 957–972. https://doi.org/10.17515/resm2024.59ma1029rs10.17515/resm2024.59ma1029rs ↗

18. N.I. Noskova, L.G. Korshunov, and A.V. Korznikov, Microstructure and Tribological Properties of Al-Sn, Al-Sn-Pb, and Sn-Sb-Cu Alloys Subjected to Severe Plastic Deformation, Met. Sci. Heat Treat., 2008, 50, p 593–599. https://doi.org/10.1007/s11041-009-9104-110.1007/s11041-009-9104-1 ↗

19. J.P. Pathak and S. Mohan, Tribological Behaviour of Conventional Al-Sn and Equivalent Al-Pb Alloys under Lubrication, Bull. Mater. Sci., 2003, 26, p 315–320. https://doi.org/10.1007/BF0270745310.1007/BF02707453 ↗

20. C.A. Billur, E. Gerçekcioglu, M. Bozoklu, B. Saatçi, M. Ari, and F. Nair, The Electrical, Thermal Conductivity, Microstructure and Mechanical Properties of Al-Sn-Pb Ternary Alloys, Solid State Sci., 2015, 46, p 107–115. https://doi.org/10.1016/j.solidstatesciences.2015.06.00510.1016/j.solidstatesciences.2015.06.005 ↗

21. A.G. Kostornov and O.I. Fushchich, Sintered Antifriction Materials, Powder Metall. Met. Ceram., 2007, 46, p 503–512. https://doi.org/10.1007/s11106-007-0078-510.1007/s11106-007-0078-5 ↗

22. N.M. Rusin, A.L. Skorentsev, and V.E. Likharev, Structure and Tribomechanical Properties of Sintered Al-Sn-Pb Composites, Russ. Phys. J., 2024, 67, p 2288–2296. https://doi.org/10.1007/s11182-025-03376-510.1007/s11182-025-03376-5 ↗

23. G.K. Williamson and R.E. Smallman, III. Dislocation Densities in Some Annealed and Cold-Worked Metals from Measurements on the x-ray Debye-Scherrer Spectrum, Philos. Mag., 1956, 1, p 34–46. https://doi.org/10.1080/1478643560823807410.1080/14786435608238074 ↗

24. K. Zhong, L. Niu, G. Li, and C. Zhang, Crack Mechanism of Al@Al2O3 Nanoparticles in Hot Energetic Materials, J. Phys. Chem. C, 2021, 125, p 2770–2778. https://doi.org/10.1021/acs.jpcc.0c1047910.1021/acs.jpcc.0c10479 ↗

25. A.J. McAlister, The Al-Pb (Aluminum-Lead) System, Bull. Alloy Phase Diagr., 1984, 5, p 69–73. https://doi.org/10.1007/BF0286872810.1007/BF02868728 ↗

26. D. Manasijevic, L. Balanovic, I. Markovic, M. Gorgievski, U. Stamenkovic, and A. Kovačevic, Thermal Properties and Microstructure of Al-Sn Alloys, J. Phys. Chem. Solids, 2024, 195, 112297. https://doi.org/10.1016/j.jpcs.2024.11229710.1016/j.jpcs.2024.112297 ↗

27. B.B. Straumal, D.A. Molodov, and W. Gust, Grain Boundary Wetting Phase Transitions on the Al-Sn and Al-Sn-Pb Systems, Mater. Sci. Forum, 1996, 207–209, p 437–440. https://doi.org/10.4028/www.scientific.net/MSF.207-209.43710.4028/www.scientific.net/MSF.207-209.437 ↗

28. H. Gabrisch, U. Dahmen, and E. Johnson, In Situ Observations of the Interaction of Liquid Lead Inclusions with Grain Boundaries in Aluminum, Microsc. Microanal., 1998, 4, p 286–293. https://doi.org/10.1017/S143192769898029110.1017/S1431927698980291 ↗

29. I. Karakaya and W.T. Thompson, The Pb-Sn (lead–tin) system, J. Phase Equilib., 1988, 9, p 144–152. https://doi.org/10.1007/BF0289055210.1007/BF02890552 ↗

30. S. Teslia, M. Teslia, Q. Sun, and A. Stepanchuk, Investigation of Microstructural Evolution and Mechanical Properties Al13Fe4 Produced by Casting and Spark-Plasma Sintering, Vacuum, 2023, 218, 112590. https://doi.org/10.1016/j.vacuum.2023.11259010.1016/j.vacuum.2023.112590 ↗

31. G.F. Lovshenko and F.G. Lovshenko, Dispersion-Hardened Al-Pb Antifriction Materials, Powder Metall. Met. Ceram., 2007, 46, p 241–247. https://doi.org/10.1007/s11106-007-0039-z10.1007/s11106-007-0039-z ↗

32. J.C. Jonsson, D.J. Chapman, L. Farbaniec, E.M. Escauriza, L.C. Smith, and D.E. Eakins, Effect of Dislocation Density on the Dynamic Strength of Aluminium, J. Dyn. Behav. Mater., 2024, 10, p 426–440. https://doi.org/10.1007/s40870-024-00436-810.1007/s40870-024-00436-8 ↗

33. J.J. Sidor, P. Chakravarty, J.G. Batorfi, P. Nagy, Q. Xie, and J. Gubicza, Assessment of Dislocation Density by Various Techniques in Cold Rolled 1050 Aluminum Alloy, Metals, 2021, 11, 1571. https://doi.org/10.3390/met1110157110.3390/met11101571 ↗

34. L. Ma, Y. Li, J. Wang, Z. Liu, and X. Zhan, Numerical Investigation of Deformation and Residual Stress in Vacuum Brazing of Titanium Alloy Plate-Fin Structure, Vacuum, 2024, 227, 113443. https://doi.org/10.1016/j.vacuum.2024.11344310.1016/j.vacuum.2024.113443 ↗

35. H.W. Anes, A. Helvoort, and K. Marthinsen, Orientation Dependent Pinning of (Sub)Grains by dispersoids during Recovery and Recrystallization in an Al-Mn Alloy, Acta Mater., 2023, 248, 118761. https://doi.org/10.1016/j.actamat.2023.11876110.1016/j.actamat.2023.118761 ↗

36. J.W. Arblaster, Selected Values of the Crystallographic Properties of Elements, ASM International, 2018.

37. S. Li, T. Luo, Z. Chao, L. Jiang, H. Han, B. Han, S. Du, and M. Liu, A Review of Dynamic Mechanical Behavior and the Constitutive Models of Aluminum Matrix Composites, Materials, 2024, 17, 1879. https://doi.org/10.3390/ma1708187910.3390/ma17081879 ↗

38. S. Malekjani, P.D. Hodgson, N.E. Stanford, and T.B. Hilditch, The Role of Shear Banding on the Fatigue Ductility of Ultrafine-Grained Aluminium, Scr. Mater., 2013, 68, p 269–272. https://doi.org/10.1016/j.scriptamat.2012.10.03810.1016/j.scriptamat.2012.10.038 ↗

39. L.S. Toth and C. Gu, Ultrafine-Grain Metals by Severe Plastic Deformation, Mater Charact, 2014, 92, p 1–14. https://doi.org/10.1016/j.matchar.2014.02.00310.1016/j.matchar.2014.02.003 ↗

40. M.C. Mwanza, M.R. Joyce, K.K. Lee, S. Syngellakis, and P.A.S. Reed, Microstructural Characterisation of Fatigue Crack Initiation in Al-Based Plain Bearing Alloys, Int. J. Fatigue, 2003, 25, p 1135–1145. https://doi.org/10.1016/S0142-1123(03)00148-810.1016/S0142-1123(03)00148-8 ↗

41. N.M. Rusin and A.L. Skorentsev, Tribological Properties of Sintered Al-Sn Alloy Doped with Iron, J. Frict. Wear, 2022, 43, p 153–159. https://doi.org/10.3103/S106836662203012610.3103/S1068366622030126 ↗

42. A.L. Skorentsev and N.M. Rusin, Effect of Titanium Aluminide Particles on Tribological Properties of Al-40Sn Alloy under Dry Friction Against Steel, J. Frict. Wear, 2025, 46, p 242–251. https://doi.org/10.3103/S106836662570058810.3103/S1068366625700588 ↗