Effect of Extrusion on Microstructures and Mechanical Properties of Mg-Ca and Mg-Zn-Ca Alloys

1. M. Yaghoobi, T. Berman, and J.E. Allison, Effects of Zn and Ca on the Deformation Texture Evolution of Mg-Zn-Ca Alloys at Elevated Temperatures, J. Mater. Res. Technol., 2025, 35, p 37–50.10.1016/j.jmrt.2024.12.236 ↗

2. J. Li, A. Zhang, H. Pan, Y. Ren, Z. Zeng, Q. Huang, C. Yang, L. Ma, and G. Qin, Effect of Extrusion Speed on Microstructure and Mechanical Properties of the Mg-Ca Binary Alloy, J. Magnesium Alloys, 2021, 9(4), p 1297–1303.10.1016/j.jma.2020.05.011 ↗

3. S. Wang, H. Pan, D. Xie, D. Zhang, J. Li, H. Xie, Y. Ren, and G. Qin, Grain Refinement and Strength Enhancement in Mg Wrought Alloys: A Review, J. Magnesium Alloys, 2023, 11(11), p 4128–4145.10.1016/j.jma.2023.11.002 ↗

4. S. Wang, H.C. Pan, C.X. Jiang, Z.H. Zeng, Z. Pan, W.N. Tang, C.B. Yang, Y.P. Ren, and G.W. Qin, Microstructure and Mechanical Property of the Large Cross-Sectioned Mg-Gd-Y-Zn-Zr Alloy Produced by Small Extrusion Ratio, Acta Metall. Sin. (Engl. Lett.), 2024, 37(6), p 999–1006.10.1007/s40195-024-01682-4 ↗

5. C. Sun, H. Liu, Z. Xu, Y. Wu, K. Yan, J. Ju, J. Jiang, F. Xue, J. Bai, and Y. Xin, Refining 18R-LPSO Phase into Sub-micron Range by Pre-kinking Design and its prominent Strengthening Effect on Mg97Y2Zn1 alloy, J. Mater. Sci. Technol., 2024, 176, p 13–24.10.1016/j.jmst.2023.07.051 ↗

6. R.G. Li, H.R. Li, H.C. Pan, D.S. Xie, J.H. Zhang, D.Q. Fang, Y.Q. Dai, D.Y. Zhao, and H. Zhang, Achieving Exceptionally High Strength in Binary Mg-13Gd Alloy by Strong Texture and Substantial Precipitates, Scripta Mater., 2021, 193, p 142–146.10.1016/j.scriptamat.2020.10.052 ↗

7. K. Yang, K. Ma, W. Xu, L. Wang, Z. Zhang, Y. Li, Z. Huang, Z. Zhao, P. Bai, J. Hou, and F. Wang, Microstructure and Mechanical Properties of Multi-pass Hot-Drawn Mg-Gd-Y-Zn-Zr Alloy Wires, J. Alloys Compd., 2025, 1037, p 182348.10.1016/j.jallcom.2025.182348 ↗

8. Z. Li, X. Gu, S. Lou, and Y. Zheng, The Development of Binary Mg–Ca Alloys for Use as Biodegradable Materials Within Bone, Biomaterials, 2008, 29(10), p 1329–1344.10.1016/j.biomaterials.2007.12.021 ↗

9. J.W. Seong and W.J. Kim, Mg-Ca Binary Alloy Sheets with Ca Contents of ≤1wt.% with High Corrosion Resistance and High Toughness, Corros. Sci., 2015, 98, p 372–381.10.1016/j.corsci.2015.05.068 ↗

10. Z.R. Zeng, Y.M. Zhu, S.W. Xu, M.Z. Bian, C.H.J. Davies, N. Birbilis, and J.F. Nie, Texture Evolution During Static Recrystallization of Cold-Rolled Magnesium Alloys, Acta Mater., 2016, 105, p 479–494.10.1016/j.actamat.2015.12.045 ↗

11. H. Pan, C. Yang, Y. Yang, Y. Dai, D. Zhou, L. Chai, Q. Huang, Q. Yang, S. Liu, Y. Ren, and G. Qin, Ultra-Fine Grain Size and Exceptionally High Strength in Dilute Mg–Ca Alloys Achieved by Conventional One-Step Extrusion, Mater. Lett., 2019, 237, p 65–68.10.1016/j.matlet.2018.11.080 ↗

12. B. Zhang, Y. Wang, L. Geng, and C. Lu, Effects of Calcium on Texture and Mechanical Properties of Hot-Extruded Mg–Zn–Ca Alloys, Mater. Sci. Eng. A, 2012, 539, p 56–60.10.1016/j.msea.2012.01.030 ↗

13. H. Zhang, H. Wang, J. Wang, J. Rong, M. Zha, C. Wang, P. Ma, and Q. Jiang, The Synergy Effect of Fine and Coarse Grains on Enhanced Ductility of Bimodal-Structured Mg Alloys, J. Alloys Compd., 2019, 780, p 312–317.10.1016/j.jallcom.2018.11.229 ↗

14. Z. Yu, A. Tang, Q. Wang, Z. Gao, J. He, J. She, K. Song, and F. Pan, High Strength and Superior Ductility of an Ultra-Fine Grained Magnesium–Manganese Alloy, Mater. Sci. Eng. A, 2015, 648, p 202–207.10.1016/j.msea.2015.09.065 ↗

15. Z.T. Li, X.G. Qiao, C. Xu, S. Kamado, M.Y. Zheng, and A.A. Luo, Ultrahigh Strength Mg-Al-Ca-Mn Extrusion Alloys with Various Aluminum Contents, J. Alloys Compd., 2019, 792, p 130–141.10.1016/j.jallcom.2019.03.319 ↗

16. X. Wei, L. Jin, F. Wang, J. Li, N. Ye, Z. Zhang, and J. Dong, High Strength and Ductility Mg-8Gd-3Y-0.5Zr Alloy with Bimodal Structure and Nano-Precipitates, J. Mater. Sci. Technol., 2020, 44, p 19–23.10.1016/j.jmst.2019.10.024 ↗

17. W. Rong, Y. Zhang, Y. Wu, Y. Chen, M. Sun, J. Chen, and L. Peng, The Role of Bimodal-Grained Structure in Strengthening Tensile Strength and Decreasing Yield Asymmetry of Mg-Gd-Zn-Zr Alloys, Mater. Sci. Eng. A, 2019, 740–741, p 262–273.10.1016/j.msea.2017.09.125 ↗

18. C. Xu, G.H. Fan, T. Nakata, X. Liang, Y.Q. Chi, X.G. Qiao, G.J. Cao, T.T. Zhang, M. Huang, K.S. Miao, M.Y. Zheng, S. Kamado, and H.L. Xie, Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure, Metall Mat Trans A Phys Metall Mat Sci, 2018, 49(5), p 1931–1947.10.1007/s11661-018-4507-5 ↗

19. H.X. Li, S.K. Qin, Y.Z. Ma, J. Wang, Y.J. Liu, and J.S. Zhang, Effects of Zn Content on the Microstructure and The Mechanical and Corrosion Properties of As-Cast Low-alloyed Mg–Zn–Ca Alloys, Int. J. Miner. Metall. Mater., 2018, 25(7), p 800–809.10.1007/s12613-018-1628-1 ↗

20. K. Oh-ishi, R. Watanabe, C.L. Mendis, and K. Hono, Age-Hardening Response of Mg–0.3at.%Ca Alloys with Different Zn Contents, Mater. Sci. Eng. A, 2009, 526(1), p 177–184.10.1016/j.msea.2009.07.027 ↗

21. G. Wang, G. Huang, X. Chen, Q. Deng, A. Tang, B. Jiang, and F. Pan, Effects of Zn Addition on the Mechanical Properties and Texture of Extruded Mg-Zn-Ca-Ce Magnesium Alloy Sheets, Mater. Sci. Eng. A, 2017, 705, p 46–54.10.1016/j.msea.2017.08.036 ↗

22. L.A. Villegas-Armenta, R.A.L. Drew, and M.O. Pekguleryuz, The Ignition Behavior of Mg-Ca Binary Alloys: The Role of Heating Rate, Oxid. Met., 2020, 93(5–6), p 545–558.10.1007/s11085-020-09970-x ↗

23. S.A. Abdel-Gawad and M.A. Shoeib, Corrosion Studies and Microstructure of Mg−Zn−Ca Alloys for Biomedical Applications, Surf. Interfaces, 2019, 14, p 108–116.10.1016/j.surfin.2018.11.011 ↗

24. S.-C. Jin, J.U. Lee, J. Go, H. Yu, and S.H. Park, Effects of Sn Addition on the Microstructure and Mechanical Properties of Extruded Mg–Bi Binary Alloy, J. Magnes Alloys, 2022, 10(3), p 850–861.10.1016/j.jma.2021.04.015 ↗

25. J. Go, J.U. Lee, H. Yu, and S.H. Park, Influence of Bi Addition on Dynamic Recrystallization and Precipitation Behaviors During Hot Extrusion of Pure Mg, J. Mater. Sci. Technol., 2020, 44, p 62–75.10.1016/j.jmst.2019.10.036 ↗

26. M. Yang, F. Liu, Y.-B. Tan, W. Shi, H. Fu, and S. Xiang, Dense Precipitation Clusters and Particle-Stimulated Nucleation-Mediated Dynamic Recrystallization Enabling Improved Strength-Ductility Synergy in a Micro-Alloyed Mg-1Zn-0.6Zr Alloy, Mater. Des., 2025, 256, p 114346.10.1016/j.matdes.2025.114346 ↗

27. M.Q. Zhang, T. Nakata, C. Xu, G.Z. Tang, K.K. Deng, X.J. Wang, G.S. Wang, S. Kamado, and L. Geng, Role of Ca content on microstructure, mechanical properties and strain evolution of as-rolled Mg-Al-Ca-Zn-Mn alloy, J. Magnes. Alloys, 2024, 13, p 5525–5537.10.1016/j.jma.2024.06.010 ↗

28. F. Kiani, J. Lin, A. Vahid, K. Munir, C. Wen, and Y. Li, Microstructures, mechanical properties, corrosion, and biocompatibility of extruded Mg-Zr-Sr-Ho alloys for biodegradable implant applications, J. Magn. Alloys, 2023, 11(1), p 110–136.10.1016/j.jma.2022.10.002 ↗

29. X. Qian, Z. Dong, B. Jiang, B. Lei, H. Yang, C. He, L. Liu, C. Wang, M. Yuan, H. Yang, B. Yang, C. Zheng, and F. Pan, Influence of alloying element segregation at grain boundary on the microstructure and mechanical properties of Mg-Zn alloy, Mater. Des., 2022 https://doi.org/10.1016/j.matdes.2022.11132210.1016/j.matdes.2022.111322 ↗

30. M. Yamasaki, K. Hashimoto, K. Hagihara, and Y. Kawamura, Effect of multimodal microstructure evolution on mechanical properties of Mg-Zn-Y extruded alloy, Acta Mater., 2011, 59(9), p 3646–3658.10.1016/j.actamat.2011.02.038 ↗

31. C. Xu, M.Y. Zheng, S.W. Xu, K. Wu, E.D. Wang, S. Kamado, G.J. Wang, and X.Y. Lv, Ultra high-strength Mg-Gd-Y-Zn-Zr alloy sheets processed by large-strain hot rolling and ageing, Mater. Sci. Eng. A. Struct. Mater. Prop. Microstruct. Process., 2012, 547, p 93–98.10.1016/j.msea.2012.03.087 ↗

32. W. Yuan, S.K. Panigrahi, J.Q. Su, and R.S. Mishra, Influence of grain size and texture on Hall-Petch relationship for a magnesium alloy, Scr. Mater., 2011, 65(11), p 994–997.10.1016/j.scriptamat.2011.08.028 ↗

33. D. Xia, X. Chen, G. Huang, B. Jiang, A. Tang, H. Yang, S. Gavras, Y. Huang, N. Hort, and F. Pan, Calculation of Schmid factor in Mg alloys: influence of stress state, Scr. Mater., 2019, 171, p 31–35.10.1016/j.scriptamat.2019.06.014 ↗

34. Y.N. Wang, C.I. Chang, C.J. Lee, H.K. Lin, and J.C. Huang, Texture and weak grain size dependence in friction stir processed Mg–Al–Zn alloy, Scr. Mater., 2006, 55(7), p 637–640.10.1016/j.scriptamat.2006.06.005 ↗

35. A. Javaid and F. Czerwinski, Effect of hot rolling on microstructure and properties of the ZEK100 alloy, J. Magnes Alloys, 2019, 7(1), p 27–37.10.1016/j.jma.2019.02.001 ↗