Study on the Microstructure and Properties of Electron Beam Welded 316L SS-Grade 91 Steel Dissimilar Weld Joint

1. H. Shaikh, R. Amirthalingam, T. Anita, N. Sivaibharasi, T. Jaykumar, P. Manohar, and H.S. Khatak, Evaluation of Stress Corrosion Cracking Phenomenon in an AISI Type 316LN Stainless Steel Using Acoustic Emission Technique, Corros. Sci., 2007, 49, p 740–765.10.1016/j.corsci.2006.06.007 ↗

2. F. Di Gioacchino and J. Quinta da Fonseca, An Experimental Study of the Polycrystalline Plasticity of Austenitic Stainless Steel, Int. J. Plast., 2015, 74, p 92–109.10.1016/j.ijplas.2015.05.012 ↗

3. C. Pandey, A. Giri, and M.M. Mahapatra, Effect of Normalizing Temperature on Microstructural Stability and Mechanical Properties of Creep Strength Enhanced Ferritic P91 Steel, Mater. Sci. Eng. A, 2016, 657, p 173–184.10.1016/j.msea.2016.01.066 ↗

4. T. Maridurai, M.S. Zameeruddin, and S. Biswas, Mechanical Properties and Fracture Characteristics of ASTM A335 P91 Steel Used in Boiler Materials, Int. J. Chem. Res., 2015, 7(2), p 654–665.

5. D.D. Awale, A.R. Ballal, and M.M. Thawre, Dissimilar Weld Joints of P91 and 316LN for Power Plants Applications-A Review, Materials Today: Proceedings, 2020, 28, p 2505–2510.

6. S. Prabanjan, S.N. Ajay, K. Karthick, S. Malarvizhi, V. Balasubramanian, and S.A. Krishnanc, Variation of Mechanical Properties Across the Dissimilar Joints: Ferritic Steel and Stainless Steel, Int. J. Veh. Struct. Syst., 2020, 12(2), p 192–196.

7. V.D. Vijayanand, D.D. Awale, A.R. Ballal, M.M. Thawre, and G.V.P. Reddy, Type IV Damage Evolution during Creep of 316LN SS-P91 Steel Dissimilar Weld Joint, J. Mater. Eng. Perform., 2024, 33, p 3115–3125.10.1007/s11665-023-08189-6 ↗

8. R.S. Vidyarthy, A. Kulkarni, and D.K. Dwivedi, Study of Microstructure and Mechanical Property Relationships of A-TIG Welded P91–316L Dissimilar Steel Joint, Mater. Sci. Eng. A, 2017, 695, p 249–257.10.1016/j.msea.2017.04.038 ↗

9. A. Kulkarni, D.K. Dwivedi, and M. Vasudevan, Dissimilar Metal Welding of P91 Steel-AISI 316L SS with Incoloy 800 and Inconel 600 Interlayers by Using Activated TIG Welding Process and its Effect on the Microstructure and Mechanical Properties, J. Mater. Process. Technol., 2019, 274, p 116280.10.1016/j.jmatprotec.2019.116280 ↗

10. S. Gain, S.K. Das, S.K. Acharyya, and D. Sanyal, Friction Stir Welding of Industrial Grade AISI 316L and P91 Steel Pipes: A Comparative Investigation Based on Mechanical and Metallurgical Properties, Int. J. Press. Vessel. Piping, 2023, 201, p 104865.10.1016/j.ijpvp.2022.104865 ↗

11. A. Hajitabar and H. Naffakh-Moosavy, Electron Beam Welding of Difficult-to-Weld Austenitic Stainless Steel/Nb-Based Alloy Dissimilar Joints without Interlayer, Vacuum, 2017, 146, p 170–178.10.1016/j.vacuum.2017.09.046 ↗

12. H. Peng, I. Baker, Y. Yi, L. Hu, W. Fang, L. Li, B. Luo, and Z. Luo, Dissimilar Electron Beam Welding of the Medium-Entropy Alloy (NiCoCr) 94Al3Ti3 to 304 Stainless Steel, Scripta Mater., 2022, 214, p 114659.10.1016/j.scriptamat.2022.114659 ↗

13. Y. Javadi, M.C. Smith, K. Abburi Venkata, N. Naveed, A.N. Forsey, J.A. Francis, R.A. Ainsworth, C.E. Truman, D.J. Smith, F. Hosseinzadeh, S. Gungor, P.J. Bouchard, H.C. Dey, A.K. Bhaduri, and S. Mahadevan, Residual Stress Measurement Round Robin on an Electron Beam Welded Joint Between Austenitic Stainless Steel 316L(N) and Ferritic Steel P91, Int. J. Press. Vessels Pip., 2017, 154, p 41–57.10.1016/j.ijpvp.2017.06.002 ↗

14. K.A. Venkata, C.E. Truman, D.J. Smith, and A.K. Bhaduri, Characterising Electron Beam Welded Dissimilar Metal Joints to Study Residual Stress Relaxation from Specimen Extraction, Int. J. Press. Vessel. Pip., 2016, 139, p 237–249.10.1016/j.ijpvp.2016.02.025 ↗

15. J. Vanaja, H.C. Dey, G.V.P. Reddy, K. Laha, and M. Vasudevan, Creep Performance and Microstructural Characterization of Electron-Beam Welded 316LN SS-Grade 91 Steel Dissimilar Joint, Metall. Mater. Trans. A, 2023, 54, p 3005–3020.10.1007/s11661-023-07074-0 ↗

16. J.C. Simmons, X. Chen, A. Azizi, M.A. Daeumer, P.Y. Zavalij, G. Zhou, and S.N. Schiffres, Influence of Processing and Microstructure on the Local and Bulk Thermal Conductivity of Selective Laser Melted 316L Stainless Steel, Addit. Manuf., 2020, 32, p 100996.

17. G. Boissonnet, G. Bonnet, and F. Pedraza, Thermo-Physical Properties of HR3C and P92 Steels at High-Temperature, J. Mater. Appl., 2019, 8(2), p 59–64.10.32732/jma.2019.8.2.59 ↗

18. K. Abburi Venkataa, C.E. Truman, H.E. Coules, and A.D. Warren, Applying Electron Backscattering Diffraction to Macroscopic Residual Stress Characterisation in a Dissimilar Weld, J. Mater. Process. Technol., 2017, 241, p 54–63.10.1016/j.jmatprotec.2016.11.003 ↗

19. L. Zhao, L. Hu, B. Lin, Y. Wang, J. Tang, L. Qi, and X. Liu, Signiffcant Improvement of Corrosion Resistance in Laser Cladded Zr-Based Metallic Glass Matrix Composite Coatings by Laser Remelting, Corros. Sci., 2024, 238, p 112360.10.1016/j.corsci.2024.112360 ↗

20. G. Chen, J. Liu, X. Shu, H. Gu, and B. Zhang, Numerical Simulation of Keyhole Morphology and Molten Pool Flow Behavior in Aluminum Alloy Electron-Beam Welding, Int. J. Heat Mass Transfer, 2019, 138, p 879–888.10.1016/j.ijheatmasstransfer.2019.04.112 ↗

21. T. Pinomaa, A. Laukkanen, and N. Provatas, Solute Trapping in Rapid Solidification, MRS Bull., 2020, 45(11), p 910–915.10.1557/mrs.2020.274 ↗

22. T. Zeng, On the Martensitic Structure and Hardness in as-Quenched Fe-Ni Alloys, J. Alloys Compd., 2022, 894, p 143042.10.1016/j.jallcom.2017.08.285 ↗

23. A. Chauhan, F. Bergner, A. Etienne, J. Aktaa, Y. de Carlan, C. Heintze, D. Litvinov, M. Hernandez-Mayoral, E. Onorbe, B. Radiguet, and A. Ulbricht, Microstructure Characterization and Strengthening Mechanisms of Oxide Dispersion Strengthened (ODS) Fe-9%Cr and Fe-14%Cr Extruded Bars, J. Nucl. Mater., 2017, 495, p 6–19.10.1016/j.jnucmat.2017.07.060 ↗

24. Z. Wang, Z. Liu, J. Ma, Y. Su, H. Deng, N. Zhou, H. Zhai, and J. Wu, Investigation on Microstructure and Mechanical Properties of Electron-Beam-Welded joint of Reduced Activation Ferritic/Martensitic Steel Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2023, 881, p 145333.10.1016/j.msea.2023.145333 ↗

25. Q. Lu, W. Xu, and S. van der Zwaag, The design of a Compositionally Robust Martensitic Creep-Resistant Steel with an Optimized Combination of Precipitation Hardening and Solid-Solution Strengthening for High-Temperature Use, Acta Mater., 2014, 77, p 310–323.10.1016/j.actamat.2014.06.007 ↗

26. M. Ratti, PhD Thesis, CEA, Institute National Polytechnique de Grenoble, (2010)

27. M. Praud, F. Mompiou, J. Malaplate, D. Caillard, J. Garnier, A. Steckmeyer, and B. Fournier, Study of the Deformation Mechanisms in a Fe-14% Cr ODS Alloy, J. Nucl. Mater., 2012, 428, p 90–97.10.1016/j.jnucmat.2011.10.046 ↗

28. J.Y. Choi, J. Moon, J.H. Jang, T.H. Lee, H.U. Hong, H.C. Kim, N.H. Kang, J.H. Shin, and C.H. Lee, Enhancement of Mechanical Properties by Repeated Heat Treatment in Reduced Activation Ferritic/Martensitic Steel with Ta and Ti, J. Nucl. Mater., 2021, 557, p 153321.10.1016/j.jnucmat.2021.153321 ↗

29. R.K. Islamgaliev, M.A. Nikitina, A.V. Ganeev, and V.D. Sitdikov, Strengthening Mechanisms in Ultrafine-Grained Ferritic/Martensitic Steel Produced by Equal Channel Angular Pressing, Mater. Sci. Eng. A, 2019, 744, p 163–170.10.1016/j.msea.2018.11.141 ↗

30. C.Y. Liu, J.D. Tong, M.G. Jiang, Z.W. Chen, G. Xu, H.B. Liao, P. Wang, X.Y. Wang, M. Xu, and C.S. Lao, Effect of Scanning Strategy on Microstructure and Mechanical Properties of Selective Laser Melted Reduced Activation Ferritic/Martensitic Steel, Mater. Sci. Eng. A, 2019, 766, p 138364.10.1016/j.msea.2019.138364 ↗

31. J. Wang, W. Li, X. Zhu, and L. Zhang, Effect of Martensite Morphology and Volume Fraction on the Low-Temperature Impact Toughness of Dual-Phase Steels, Mater. Sci. Eng. A, 2022, 832, p 142424.10.1016/j.msea.2021.142424 ↗

32. A. Laukkanen, P. Nevasmaa, U. Ehrnstén, and R. Rintamaa, Characteristics Relevant to Ductile Failure of Bimetallic Welds and Evaluation of Transferability of Fracture Properties, Nucl. Eng. Des., 2007, 237(1), p 1–15.10.1016/j.nucengdes.2006.03.022 ↗

33. M.K. Samal, M. Seidenfuss, E. Roos, and K. Balani, Investigation of Failure Behavior of Ferritic-Austenitic Type of Dissimilar Steel Welded Joints, Eng. Fail. Anal., 2011, 18(3), p 999–1008.10.1016/j.engfailanal.2010.12.011 ↗

34. J.S. Lee, K. Fushimi, T. Nakanishi, Y. Hasegawa, and Y.S. Park, Corrosion Behaviour of Ferrite and Austenite Phases on Super Duplex Stainless Steel in a Modified Green-Death Electrolyte, Corros. Sci., 2014, 89, p 111–117.10.1016/j.corsci.2014.08.014 ↗

35. R. Sánchez-Tovar, M.T. Montañés, and J. García-Antón, The Effect of Temperature on the Galvanic Corrosion of the Copper/AISI 304 Pair in LiBr Electrolyte under Hydrodynamic Conditions, Corros. Sci., 2010, 52(3), p 722–733.10.1016/j.corsci.2009.10.032 ↗

36. P. Murkute, S. Pasebani, and O.B. Isgor, Effects of Heat Treatment and Applied Stresses on the Corrosion Performance of Additively manufactured Super Duplex Stainless Steel Clads, Materialia, 2020, 14, p 100878.10.1016/j.mtla.2020.100878 ↗

37. K. Sugimoto and Y. Sawada, Role of Alloyed Molybdenum in Austenitic Stainless Steels in the Inhibition of Pitting in Neutral Halide Solutions, Corrosion, 1976, 32, p 347–352.10.5006/0010-9312-32.9.347 ↗