Experimental Investigation on the Correlation Between Porosity and Mode I Fracture Toughness of Rock-Like Material

1. M.D. Kuruppu, Y. Obara, M.R. Ayatollahi, K.P. Chong, and T. Funatsu, ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen, Rock Mech. Rock Eng., 2014, 47(1), p 267–274.10.1007/s00603-013-0422-7 ↗

2. L.N.Y. Wong, T.Y. Guo, W.K. Lam, and J.Y.H. Ng, Experimental Study of Cracking Characteristics of Kowloon Granite Based on Three Mode I Fracture Toughness Methods, Rock Mech. Rock Eng., 2019, 52(11), p 4217–4235.10.1007/s00603-019-01882-w ↗

3. T.L. Anderson, Fracture Mechanics: Fundamentals and Applications, CRC Taylor & Francis, New York, 2005.10.1201/9781420058215 ↗

4. S. Miao, P.-Z. Pan, W. Hou, M. Li, and Z. Wu, Determination of Mode I Fracture Toughness of Rocks with Field Fitting and J-Integral Methods, Theor. Appl. Fract. Mech., 2022, 118, 103263.10.1016/j.tafmec.2022.103263 ↗

5. G. Zhao, W. Yao, and X. Li et al., Influence of Notch Geometry on the Rock Fracture Toughness Measurement Using the ISRM Suggested Semi-Circular Bend (SCB) Method, Rock Mech. Rock Eng., 2022, 55, p 2239–2253.10.1007/s00603-022-02773-3 ↗

6. F. Ouchterlony, Suggested Methods for Determining the Fracture Toughness of Rock, Int. J. Rock Mech. Min. Sci., 1988, 25(2), p 71–96.10.1016/0148-9062(88)91871-2 ↗

7. R.J. Fowell, ISRM Commission on Testing Methods. SUGGESTED METHOD for Determining Mode I Fracture Toughness Using Cracked Chevron Notched Brazilian Disc (CCNBD) Specimens, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1995, 32(1), p 57–64.10.1016/0148-9062(94)00015-U ↗

8. L. Tutluoglu, C. Karatas Batan, and M.R.M. Aliha, Tensile Mode Fracture Toughness Experiments on Andesite Rock Using Disc and Semi Disc Bend Geometries with Varying Loading Spans, Theor. Appl. Fract. Mech., 2022, 119, 103325.10.1016/j.tafmec.2022.103325 ↗

9. Y. Xu, F. Dai, and T. Zhao et al., Fracture Toughness Determination of Cracked Chevron Notched Brazilian Disc Rock Specimen Via Griffith Energy Criterion Incorporating Realistic Fracture Profiles, Rock Mech. Rock Eng., 2016, 49, p 3083–3093.10.1007/s00603-016-0978-0 ↗

10. M.H.B. Nasseri, B. Mohanty, and R.P. Young, Fracture Toughness Measurements and Acoustic Emission Activity in Brittle Rocks, Pure Appl. Geophys., 2006, 163, p 917–945.10.1007/s00024-006-0064-8 ↗

11. M.D. Wei, F. Dai, and N.W. Xu et al., Experimental and Numerical Study on the Cracked Chevron Notched Semi-Circular Bend Method for Characterizing The Mode I Fracture Toughness of Rocks, Rock Mech. Rock Eng., 2016, 49(5), p 1595–1609.10.1007/s00603-015-0855-2 ↗

12. M.R.M. Aliha and A. Bahmani, Rock Fracture Toughness Study under Mixed Mode I/III Loading, Rock Mech. Rock Eng., 2017, 50(7), p 1739–1751.10.1007/s00603-017-1201-7 ↗

13. M.R.M. Aliha, E. Mahdavi, and M.R. Ayatollahi, The Infuence of Specimen Type on Tensile Fracture Toughness of Rock Materials, Pure Appl. Geophys., 2017, 174(3), p 1237–1253.10.1007/s00024-016-1458-x ↗

14. A. Bahmani and S. Nemati, Fracture Resistance of Railway Ballast Rock under Tensile And Tear Loads, Eng. Solid Mech., 2021, 9(3), p 271–280.10.5267/j.esm.2021.3.003 ↗

15. M.R. Mohammad Aliha, H. Ghesmati Kucheki, and M.M. Asadi, On the Use of Different Diametral Compression Cracked Disc Shape Specimens for Introducing Mode III Deformation, Fatigue & Fract. Eng. Mater. Struct., 2021, 44(11), p 3135–3151.10.1111/ffe.13570 ↗

16. A. Bahmani, F. Farahmand, M.R. Janbaz, A.H. Darbandi, H. Ghesmati-Kucheki, and M.R.M. Aliha, On the Comparison of Two Mixed-Mode I+ III Fracture Test Specimens, Eng. Fract. Mech., 2021, 241, p 107434.10.1016/j.engfracmech.2020.107434 ↗

17. E. Mahdavi, M.R.M. Aliha, B. Bahrami, and M.R. Ayatollahi, Comprehensive Data for Stress Intensity Factor and Critical Crack Length in Chevron Notched Semi-Circular Bend Specimen Subjected to Tensile Type Fracture Mode, Theor. Appl. Fract. Mech., 2020, 106, 102466.10.1016/j.tafmec.2019.102466 ↗

18. K. Khan and N.A. Al-Shayea, Effect of Specimen Geometry and Testing Method on Mixed Mode I-II Fracture Toughness of a Limestone Rock from Saudi Arabia, Rock Mech. Rock Eng., 2000, 33(3), p 179–206.10.1007/s006030070006 ↗

19. M.R.M. Aliha, E. Mahdavi, and M.R. Ayatollahi, Statistical Analysis of Rock Fracture Toughness Data Obtained from Diferent Chevron Notched and Straight Cracked Mode I Specimens, Rock Mech. Rock Eng., 2018, 51(7), p 2095–2114.10.1007/s00603-018-1454-9 ↗

20. C. Keles and L. Tutluoglu, Investigation of Proper Specimen Geometry for Mode I Fracture Toughness Testing with Fattened Brazilian Disc Method, Int. J. Fract., 2011, 69, p 61–75.10.1007/s10704-011-9584-z ↗

21. L. Tutluoglu and C. Keles, Mode I Fracture Toughness Determination with Straight Notched Disk Bending Method, Int. J. Rock Mech. Min. Sci., 2011, 48, p 1248–1261.10.1016/j.ijrmms.2011.09.019 ↗

22. Q. Xie, X. Liu, and S. Li et al., Prediction of Mode I Fracture Toughness of Shale Specimens by Different Fracture Theories Considering Size Effect, Rock Mech. Rock Eng., 2022, 55, p 7289–7306.10.1007/s00603-022-03030-3 ↗

23. M.D. Wei, F. Dai, N.W. Xu, Y. Liu, and T. Zhao, A Novel Chevron Notched Short Rod Bend Method for Measuring the Mode I Fracture Toughness of Rocks, Eng. Fract. Mech., 2017, 190, p 1–15.10.1016/j.engfracmech.2017.11.041 ↗

24. L.N.Y. Wong, T.Y. Guo, and W.K. Lam et al., Experimental Study of Cracking Characteristics of Kowloon Granite Based on Three Mode I Fracture Toughness Methods, Rock Mech. Rock Eng., 2019, 52, p 4217–4235.10.1007/s00603-019-01882-w ↗

25. S.M. Deyab, A. Ahmadihosseini, and H. Rafezi et al., Investigating Microwave Treatment of Rocks Based on Fracture Mechanics Analysis in Mode I Fracture Toughness Test, Rock Mech. Rock Eng., 2023, 56, p 5275–5291.10.1007/s00603-023-03327-x ↗

26. B. Mahanta, T.N. Singh, and P.G. Ranjith, Influence of Thermal Treatment on Mode I Fracture Toughness of Certain Indian Rocks, Eng. Geol., 2016, 210, p 103–114.10.1016/j.enggeo.2016.06.008 ↗

27. M. Alneasan, A.K. Alzo’Ubi, and M. Behnia et al., Experimental Observations on the Effect of Thermal Treatment on the Crack Speed and Mode I and II Fracture Toughness in Brittle and Ductile Rocks, Theor. Appl. Fract. Mech., 2022, 121, 103525.10.1016/j.tafmec.2022.103525 ↗

28. M. Kataoka, Y. Obara, and M. Kuruppu, Estimation of Fracture Toughness of Anisotropic Rocks by Semi-Circular Bend (SCB) Tests under Water Vapor Pressure, Rock Mech. Rock Eng., 2015, 48(4), p 1353–1367.10.1007/s00603-014-0665-y ↗

29. M.D. Kuruppu, Y. Obara, M.R. Ayatollahi, K.P. Chong, and T. Funatsu, Isrm-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen, Rock Mech. Rock Eng., 2014, 47, p 267–274.10.1007/s00603-013-0422-7 ↗

30. R. Ebrahimi and M. Hosseini, Experimental Study of Effect of Number of Heating-Cooling Cycles on Mode I and Mode II Fracture Toughness of Travertine, Theor. Appl. Fract. Mech., 2022, 117, 103185.10.1016/j.tafmec.2021.103185 ↗

31. L. Wang, Y. Xue, and Z. Cao et al., Experimental Study on Mode I Fracture Characteristics of Granite After Low Temperature Cooling with Liquid Nitrogen, Water, 2023, 15(19), p 3442.10.3390/w15193442 ↗

32. J.F. Shao, K.T. Chau, and X.T. Feng, Modeling of Anisotropic Damage and Creep Deformation in Brittle Rocks, Int. J. Rock Mech. Min. Sci., 2006, 43(4), p 582–592.10.1016/j.ijrmms.2005.10.004 ↗

33. L.I. Ying, C.H.E.N. Liang, and L.I.U. Jianfeng et al., Experimental Study on Influence of Saturation Process and Grain Size on the Fracture Toughness of the Beishan Granite, Chin. J. Rock Mech. Eng., 2018, 37(Supp. 1), p 3169–3177.

34. T. Funatsu, M. Seto, H. Shimada, K. Matsui, and M. Kuruppu, Combined Effects of Increasing Temperature and Confining Pressure on the Fracture Toughness of Clay Bearing Rocks, Int. J. Rock Mech. Min. Sci., 2004, 41(6), p 927–938.10.1016/j.ijrmms.2004.02.008 ↗

35. J. Shang, H. Li, and Z. Zhao, Effect of Microstructure on Fracture Toughness of Porous Rocks, Int. J. Fract., 2018, 209(1-2), p 81–95.

36. Y. Zhang, C. Jiang, and X. Liu, Influence of Porosity on the Fracture Toughness of Rock: an Experimental and Numerical Study, J. Rock Mech. Geotech. Eng., 2020, 12(4), p 789–798.

37. X. Li and L. Zhang, Effects of Porosity on Mechanical Properties and Failure Modes of Sandstone under Tensile Stress, Int. J. Rock Mech. Min. Sci., 2019, 115, p 23–34.

38. K. Zhang, Ke. Zhang, J. Ye, W. Liu, S. Guan, and Na. Li, Cracking and Deformation Behaviors of Overhanging Rock: Laboratory Tests and Optical Monitoring, J. Rock Mech. Geotech. Eng., 2025, 17(7), p 4077–4097.10.1016/j.jrmge.2024.09.041 ↗

39. C. Tang, S. Wang, and W. Zhu, Microscopic Mechanism of Tensile Fracture in Heterogeneous Rock with Porosity, Acta Mech. Sin., 2011, 27(5), p 808–817.

40. C.S. Tang, Y.J. Cui, B. Shi, A.M. Tang, and C. Liu, Desiccation Cracking Behavior of Polypropylene Fiber-Reinforced Clayey Soil, Geotext. Geomembr., 2011, 29(1), p 68–76.

41. T. Ma, C. Wei, and C. Yao et al., Microstructural Evolution of Expansive Clay during Drying-Wetting Cycle, Acta Geotech., 2020, 15, p 2355–2366.10.1007/s11440-020-00938-4 ↗

42. Z.X. Zhang, An Empirical Relation Between Mode I Fracture Toughness and the Tensile Strength of Rock, Int. J. Rock Mech. Min. Sci., 2022, 39(3), p 401–406.10.1016/S1365-1609(02)00032-1 ↗