Failure Behavior of an EZ30 Magnesium Alloy Cup during Hot Backward Extrusion: Experimental and Numerical Analysis Based on the Oyane Criterion

1. C.M. Wang, Y.U. Chen, and S.F. Xiao, Situation of Research and Development of Thermal Conductive Magnesium Alloys, Rare Metal Mater. Eng., 2015, 44(10), p 2596–2600.

2. S.V.S. Prasad, S.B. Prasad, K. Verma, R.K. Mishra, V. Kumar, and S. Singh, The role and significance of Magnesium in modern day research-A review, J. Magnesium Alloys, 2022, 10(1), p 1–61.10.1016/j.jma.2021.05.012 ↗

3. A. Bahmani, M. Lotfpour, M. Taghizadeh, and W.J. Kim, Corrosion Behavior of Severely Plastically Deformed Mg and Mg Alloys, J. Magnesium Alloys, 2022, 10(10), p 2607–2648.10.1016/j.jma.2022.09.007 ↗

4. F. Pan, M. Yang, and X. Chen, A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New Alloys, J. Mater. Sci. Technol., 2016, 32(12), p 1211–1221.10.1016/j.jmst.2016.07.001 ↗

5. N.P. Papenberg, S. Gneiger, I. Weißensteiner, P.J. Uggowitzer, and S. Pogatscher, Mg-Alloys for Forging Applications: A Review, Materials, 2020, 13(4), p 985.10.3390/ma13040985 ↗

6. J. Tan and S. Ramakrishna, Applications of Magnesium and Its Alloys: A Review, Appl. Sci. Basel, 2021, 11(15), p 6861.10.3390/app11156861 ↗

7. W. Chen, J. Ma, C. Cui, W. Zhang, W. Wang, X. Liu, J. Yang, and G. Cui, Texture Role in the Mechanical Property Improvement Contributed by Grain Refinement for Mg-2.6 Nd-0.55 Zn-0.5 Zr Alloy Subjected to Extrusion Process, Mater. Sci. Eng. A, 2022, 831, p 142185.10.1016/j.msea.2021.142185 ↗

8. J. He, W.Z. Chen, Z.J. Zhang, X.M. Chen, J.F. Ma, W.K. Wang, and W.C. Zhang, Extrusion Techniques on Microstructure Optimization and Quantitative Analysis of Texture Influence on Ductility Improvement for Heat-Resistant Mg-Nd-Zn-Zr Magnesium Alloy, J. Mater. Sci., 2022, 57(6), p 4334–4353.10.1007/s10853-022-06881-x ↗

9. Y.Q. Li, F. Li, F.W. Kang, H.Q. Du, and Z.Y. Chen, Recent Research and Advances in Extrusion Forming of Magnesium Alloys: A Review, J. Alloys Comp., 2023, 953, p 170080.10.1016/j.jallcom.2023.170080 ↗

10. Y. Wang, F. Li, N. Bian, H.Q. Du, and P. Da Huo, Mechanism of Plasticity Enhancement of AZ31B Magnesium Alloy Sheet by Accumulative Alternating Back Extrusion, J Magnes Alloy, 2023, 11(5), p 1791–1801.10.1016/j.jma.2021.08.035 ↗

11. A. Jahani, H. Jamshidi Aval, M. Rajabi, and R. Jamaati, Effect of Extrusion Speed on Properties of Cu−5vol.%Ti2SnC Composite Wire Fabricated by Friction Stir Back Extrusion Process, Trans. Nonferr. Metals Soci. China, 2024, 34(3), p 935–951.10.1016/S1003-6326(23)66444-1 ↗

12. Y.X. Liu, Research Progress in Effect of Alloying on Electrochemical Corrosion Rates of Mg Alloys, Rare Metal Mater. Eng., 2021, 50(1), p 361–372.

13. K. Gusieva, C.H.J. Davies, J.R. Scully, and N. Birbilis, Corrosion of Magnesium Alloys: The Role of Alloying, Int. Mater. Rev., 2015, 60(3), p 169–194.10.1179/1743280414Y.0000000046 ↗

14. Z.R. Zeng, N. Stanford, C.H.J. Davies, J.F. Nie, and N. Birbilis, Magnesium Extrusion Alloys: A Review of Developments and Prospects, Int. Mater. Rev., 2019, 64(1), p 27–62.10.1080/09506608.2017.1421439 ↗

15. W.B. Du, Y.F. Wu, Z.R. Nie, X.K. Su, and T.Y. Zuo, Effects of Rare Earth and Alkaline Earth on Magnesium Alloys and Their Applications Status, Rare Metal Mater. Eng., 2006, 35(9), p 1345–1349.

16. G.G. Wang and J.P. Weiler, Recent Developments in High-Pressure Die-Cast Magnesium Alloys for Automotive and Future Applications, J. Magnes. Alloys, 2023, 11(1), p 78–87.10.1016/j.jma.2022.10.001 ↗

17. B. Anthony, B. Leu, I.J. Beyerlein, and V.M. Miller, Deformation Twin Interactions with Grain Boundary Particles in Multi-Phase Magnesium Alloys, Acta Mater., 2021, 219, p 117225.10.1016/j.actamat.2021.117225 ↗

18. B. Ravaji and S.P. Joshi, A Crystal Plasticity Investigation of Grain Size-Texture Interaction in Magnesium Alloys, Acta Mater., 2021, 208, p 116743.10.1016/j.actamat.2021.116743 ↗

19. Q. Li, L. Jin, F. Wang, S. Dong, J. Zeng, F. Wang, and J. Dong, Crack Propagation Path Deflection Induced by α-Mg/LPSO Interface and its Effect on the Fracture Toughness of Cast Mg-RE-Zn Alloys, J. Magnes. Alloys, 2024 https://doi.org/10.1016/j.jma.2024.11.02110.1016/j.jma.2024.11.021 ↗

20. X. Liu, Z.Q. Zhang, W.Y. Hu, Q.C. Le, L. Bao, and J.Z. Cui, Effects of Extrusion Speed on the Microstructure and Mechanical Properties of Mg-9Gd-3Y-1.5Zn-0.8Zr alloy, J. Mater. Sci. Technol., 2016, 32(4), p 313–319.10.1016/j.jmst.2015.12.004 ↗

21. R. Li, Z.B. Zheng, M. Zhan, H.R. Zhang, X.L. Cui, and Y.D. Lei, Fracture Prediction for Metal Sheet Deformation under Different Stress States with Uncoupled Ductile Fracture Criteria, J. Manuf. Process., 2022, 73, p 531–543.10.1016/j.jmapro.2021.11.023 ↗

22. S.Z. Qamar, J.C. Chekotu, and S.B. Qamar, Effect of Shape Complexity on Ram Pressure and Metal Flow in Aluminum Extrusion, JOM, 2019, 71(12), p 4378–4392.10.1007/s11837-019-03748-6 ↗

23. W. Hua, J. Li, Z. Zhu, A. Li, J. Huang, Z. Gan, and S. Dong, A Review of Mixed Mode I-II Fracture Criteria and Their Applications in Brittle or Quasi-Brittle Fracture Analysis, Theor. Appl. Frac. Mech., 2023, 124, p 103741.10.1016/j.tafmec.2022.103741 ↗

24. J. Besson, Continuum Models of Ductile Fracture: A Review, Int. J. Damage Mech, 2010, 19(1), p 3–52.10.1177/1056789509103482 ↗

25. W. Wciślik and R. Pała, Some Microstructural Aspects of Ductile Fracture of Metals, Materials, 2021, 14(15), p 4321.10.3390/ma14154321 ↗

26. H. Sui, L. Yu, W. Liu, Y. Liu, Y. Cheng, and H. Duan Theoretical Models of Void Nucleation and Growth for Ductile Metals under Dynamic Loading: A Review Matter Radi. Extr., 2022, 7, p 110.1063/5.0064557 ↗

27. J.G. Liu and W. Liu, Evaluation of Seven Ductile Fracture Criteria for Failure Prediction of AZ31 Sheet in Warm Forming, 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Xiamen, PEOPLES R CHINA, 2012, pp. 1947-1950.10.4028/www.scientific.net/AMR.482-484.1947 ↗

28. E. Dai, Z. Lv, P. Yuan, G. Liu, N. Guo, Z. Liu, and B. Tang, Ductile Fracture of Anisotropic QP980 Steel Sheet by Using the Isotropic/Anisotropic Modified Mohr-Coulomb Models, Eng. Frac. Mech., 2023, 290, p 109522.10.1016/j.engfracmech.2023.109522 ↗

29. M. Oyane, Criteria of ductile fracture strain, Bulletin JSME, 1972, 15(90), p 1507–1513.10.1299/jsme1958.15.1507 ↗

30. S. Shima and M. Oyane, Plasticity Theory for Porous Metals, Internat. J. Mech. Sci., 1976, 18(6), p 285–291.10.1016/0020-7403(76)90030-8 ↗

31. R. Xiao, X.X. Li, L.H. Lang, Q. Song, and K.N. Liu, Forming Limit in Thermal Cruciform Biaxial Tensile Testing of Titanium Alloy, J. Mater. Process. Technol., 2017, 240, p 354–361.10.1016/j.jmatprotec.2016.10.016 ↗

32. J. Kim, S.J. Kang, and B.S. Kang, A Prediction of Bursting Failure in Tube Hydroforming Processes Based on Ductile Fracture Criterion, Int. J. Adv. Manuf. Technol., 2003, 22(5–6), p 357–362.10.1007/s00170-002-1489-6 ↗

33. J. Ma, S. Wang, J. Yang, W. Zhang, W. Chen, G. Cui, and G. Chu, Hot Deformation Behavior, Processing Maps and Microstructural Evolution of the Mg-2.5 Nd-0.5 Zn-0.5 Zr Alloy, Materials, 2022, 15(5), p 1745.10.3390/ma15051745 ↗

34. X.M. Chen, W.Z. Chen, L.X. Zhang, H.X. Wang, W.K. Wang, and W.C. Zhang, Combined-Extrusion Techniques for Fabricating Yield-Symmetric ZK61 Magnesium Alloys Rods Focusing on Texture Influence on their Mechanical Responses, J. Mater. Process. Technol., 2021, 297, p 117236. https://doi.org/10.1016/j.jmatprotec.2021.11723610.1016/j.jmatprotec.2021.117236 ↗

35. Y. Cao, H. Di, R.D.K. Misra, J. Zhang, and T. Ma, An Electron Backscattered Diffraction Study on the Dynamic Recrystallization Behavior of a Nickel-Chromium Alloy 800H During Hot Deformation, Mater. Sci. Eng. A, 2013, 585, p 71–85.10.1016/j.msea.2013.07.037 ↗

36. R. Hill, Theoretical plasticity of textured aggregates, Math. Proc. Cambridge, 2008, 85(1), p 179–191.10.1017/S0305004100055596 ↗

37. W. Pantleon, Resolving the Geometrically Necessary Dislocation Content by Conventional Electron Backscattering Diffraction, Scr. Mater., 2008, 58(11), p 994–997.10.1016/j.scriptamat.2008.01.050 ↗

38. C.D. Barrett, A. Imandoust, A.L. Oppedal, K. Inal, M.A. Tschopp, and H. El Kadiri, Effect of Grain Boundaries on Texture Formation During Dynamic Recrystallization of Magnesium Alloys, Acta Mater., 2017, 128, p 270–283.10.1016/j.actamat.2017.01.063 ↗

39. X.B. Li, S.M. Xiong, and Z.P. Guo, Correlation Between Porosity and Fracture Mechanism in High Pressure Die Casting of AM60B Alloy, J. Mater. Sci. Technol., 2016, 32(1), p 54–61.10.1016/j.jmst.2015.10.002 ↗