Magnetic Barkhausen noise in Fe, Ni and co as function of stress state and microstructure
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (38)
Show source-provided references
1. Chen · 1986
2. Legvold · 1980
3. Buschow · 1980
4. Pilot study of temperature-dependent Barkhausen noise in cobalt and gadolinium10.1016/j.jmmm.2025.173651 ↗
5. Cullity · 2009
6. Jiles · 2016
7. Chikazumi · 2005
8. Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large-bearing production10.1016/j.jmatprotec.2016.09.015 ↗
9. Magnetic Barkhausen noise emission technique for evaluation of residual stress alteration by grinding in case – carburised En36 steel10.1016/j.actamat.2005.06.029 ↗
10. Bearing steels with grinding burns studied by Barkhausen noise and advanced microscopy techniques – role of carbides stability in steel performance10.1016/j.ndteint.2025.103416 ↗
11. Non-destructive testing on creep degraded 12% Cr-Mo-W-V ferritic test samples using Barkhausen noise10.1016/j.jmmm.2019.166102 ↗
12. Magnetic Barkhausen noise and hysteresis loop in commercial carbon steel: influence of applied tensile stress and grain size10.1016/S0304-8853(01)00066-X ↗
13. Barkhausen noise as a microstructure characterisation tool10.1016/j.physb.2013.09.027 ↗
14. Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic Barkhausen noise analysis10.1016/j.msea.2009.09.006 ↗
15. Non-destructive monitoring of corrosion extent in steel rope wires via Barkhausen noise emission10.1016/j.jmmm.2019.04.017 ↗
16. Influence of slip ratio on the phase stability of austenitic steel AISI 304 during rolling contact wear10.26599/FRICT.2025.9441203 ↗
17. Investigation of shot-peened austenitic stainless steel 304L by means of magnetic Barkhausen noise10.1016/j.msea.2010.06.008 ↗
18. Impact of stress distribution between delta ferrite and austenite on the strain-induced martensite in AISI 304 steel10.1016/j.jmrt.2026.01.202 ↗
19. Study of martensite induced by deformation with magnetic Barkhausen noise technique
20. Correlation of magnetic field and stress-induced magnetic domain reorientation with Barkhausen noise10.1016/j.jmmm.2020.167588 ↗
21. Micro-macro characteristics between domain wall motion and magnetic Barkhausen noise under tensile stress10.1016/j.jmmm.2019.165719 ↗
22. Effect of stress on the magnetic Barkhausen noise energy cycles: a route for stress evaluation in ferromagnetic materials10.1016/j.mseb.2022.115650 ↗
23. Magnetoacoustic emission and Barkhausen noise of cobalt nickel oriented silicon steel and permalloy10.1016/S0304-8853(00)00416-9 ↗
24. Mittemeijer · 2004
25. Formation mechanisms of affected layers induced by grinding hardened AISI 52100 steel10.1016/j.precisioneng.2023.11.006 ↗
26. A comparative study of hard turned and cylindrically ground white layers10.1016/j.ijmachtools.2003.10.009 ↗
27. Experimental investigation of heat transfer in grinding10.1016/S0007-8506(07)62336-1 ↗
28. Thermal analysis of grinding10.1016/j.cirp.2007.10.005 ↗
29. Smallman · 2014
30. Neel · Cahiers de Phys. · 1944 · 25 · 1
31. Monitoring of S235 steel over-stressing by the use of Barkhausen noise technique10.1016/j.engfailanal.2020.104843 ↗
32. Monitoring of plastic straining degree of components made of interstitial free steel after uniaxial tensile test by the use of Barkhausen noise technique
33. Varga · 2014
34. Reading depth of the magnetic Barkhausen noise. II. Two-phase surface-treated steels
35. Reading depth of the magnetic Barkhausen noise. I. One phase semi-hard ribbons
36. Spectral damping in Barkhausen noise10.1109/TMAG.1975.1058960 ↗
37. The attempt of new approach to evaluate surface integrity
38. The effect of different thermal treatment on the allotropic fcc to hcp transformation and compression behavior of polycrystalline cobalt10.3390/ma13245775 ↗