Effect of Reflow Voids on Electromigration-Induced Failure Modes of Sn-3.0Ag-0.5Cu BGA Solder Joints

1. I.A. Blech and E.S. Meieran, Direct transmission electron microscope observation of electrotransport in aluminum thin films. Appl. Phys. Lett. 11, 262 (1967). https://doi.org/10.1063/1.1755127.10.1063/1.1755127 ↗

2. M.L. Huang, S.B. Wang, H.C. You, H.L. Liu, J. Ren, and F.F. Huang, Electromigration of Sn-based microbumps in chip interconnections of integrated circuits: from physical nature to reliability improvement. Acta Metall. Sin. 61, 979 (2025). https://doi.org/10.11900/0412.1961.2024.00290.10.11900/0412.1961.2024.00290 ↗

3. J.J. Clement and C.V. Thompson, Modeling EM-induced stress evolution in confined metal lines. J. Appl. Phys. 78, 900 (1995). https://doi.org/10.1063/1.360281.10.1063/1.360281 ↗

4. M.L. Huang, J.F. Zhao, Z.J. Zhang, and N. Zhao, Role of diffusion anisotropy in β-Sn in microstructural evolution of Sn-3.0Ag-0.5Cu flip chip bumps undergoing electromigration. Acta Mater. 100, 98 (2015). https://doi.org/10.1016/j.actamat.2015.08.037.10.1016/j.actamat.2015.08.037 ↗

5. M.L. Huang, J.F. Zhao, Z.J. Zhang, and N. Zhao, Dominant effect of high anisotropy in β-Sn grain on electromigration induced failure mechanism in Sn-3.0Ag-0.5Cu interconnect. J. Alloy. Compd. 678, 370 (2016). https://doi.org/10.1016/j.jallcom.2016.04.024.10.1016/j.jallcom.2016.04.024 ↗

6. W. Tian, Y. Zhang, Y. Chen, S. Chen, H. Cui, Simulation research on electromigration of BGA devices. In 2021 22nd International Conference on Electronic Packaging Technology (ICEPT, Xiamen, China, 2021) 1-5 (2021). https://doi.org/10.1109/ICEPT52650.2021.9568130.10.1109/ICEPT52650.2021.9568130 ↗

7. S. Ye, M.L. Huang, L.D. Chen, S.M. Zhou, Failure mechanisms of Ni/Sn3.0Ag0.5Cu/OSP flip chip solder under high current stressing. In 2011 12th International Conference on Electronic Packaging Technology and High Density Packaging (IEEE, Shanghai, China, 2011) 1-5 (2011). https://doi.org/10.1109/ICEPT.2011.6066903.10.1109/ICEPT.2011.6066903 ↗

8. Y.W. Chang, Y. Cheng, L. Helfen, F. Xu, T. Tian, M. Scheel, M.D. Michiel, C. Chen, K.N. Tu, and T. Baumbach, Electromigration mechanism of failure in flip-chip solder joints based on discrete void formation. Sci. Rep. 7, 17950 (2017). https://doi.org/10.1038/s41598-017-06250-8.10.1038/s41598-017-06250-8 ↗

9. Y. Li, J.S. Moore, B. Pathangey, and R.C. Dias, Lead-free solder joint void evolution during multiple subsequent high-temperature reflows. IEEE Trans. Device Mater. Reliab. (2012). https://doi.org/10.1109/TDMR.2012.2190736.10.1109/TDMR.2012.2190736 ↗

10. E. Padilla, V. Jakkali, L. Jiang, and N. Chawla, Quantifying the effect of porosity on the evolution of deformation and damage in Sn-based solder joints by x-ray microtomography and microstructure-based finite element modeling. Acta Mater. 60, 4017 (2012). https://doi.org/10.1016/j.actamat.2012.03.048.10.1016/j.actamat.2012.03.048 ↗

11. H.X. Xie, D. Friedman, K. Mirpuri, and N. Chawla, Electromigration damage characterization in Sn-3.9Ag-0.7Cu and Sn-3.9Ag-0.7Cu-0.5Ce solder joints by three-dimensional x-ray tomography and scanning electron microscopy. J. Electron. Mater. 43, 33 (2014). https://doi.org/10.1007/s11664-013-2667-z.10.1007/s11664-013-2667-z ↗

12. C. Li, H.Y. Yuan, Z.L. Ma, and X.W. Cheng, Effect of β-Sn grain orientations on the electromigration-induced evolution of voids in SAC305 BGA solder joints. Mater Charact 215, 114227 (2024). https://doi.org/10.1016/j.matchar.2024.114227.10.1016/j.matchar.2024.114227 ↗

13. J.F. Xu, S. McCann, H.Y. Wang, V. Pham, S.R. Cain, G. Refai-Ahmed, S.B. Park, Time 0 void evolution and effect on electromigration. In 2019 69th Electronic Components and Technology Conference (ECTC). (IEEE, Las Vegas, 2019) 2331-2336 (2019). https://doi.org/10.1109/ECTC.2019.00321.10.1109/ECTC.2019.00321 ↗