In-situ electrically heated roll forming of Inconel 625 micro-channels: Dynamic recrystallization mechanism and thermal service performance

1. Experimental analysis and thermodynamic modeling for multilevel heat exchange system with multifluid in aero engines10.1016/j.energy.2025.134373 ↗

2. Numerical and experimental study on the structural-functional integrated bypass duct air-to-air heat exchanger10.1016/j.applthermaleng.2026.130475 ↗

3. Performance analysis of scCO2 closed Brayton cycle applied to aero engine thermal protection considering flow and heat transfer characteristics inside the scCO2-fuel heat exchanger10.1016/j.supflu.2025.106787 ↗

4. Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers10.3390/ijtpp7020012 ↗

5. Performance of parallel plate-fin heat exchanger for piston aero-engines with front-placed guide plate at high altitude10.1016/j.applthermaleng.2022.118829 ↗

6. Flow and heat transfer characteristics of intake-precooler system for hypersonic precooled aero-engine10.1016/j.applthermaleng.2023.120596 ↗

7. Forming limit diagram and optimization of process parameters in SPIF of Inconel 625 aviation-grade superalloy10.1108/AEAT-07-2023-0179 ↗

8. Study on high temperature stability of inconel 625 surfacing alloys10.1088/2053-1591/ae1781 ↗

9. Examination of Oxide Formation in Oxidation of Inconel 600 and 625 at High Temperatures Using Phase Diagrams10.3390/coatings14121550 ↗

10. Reveal the Viscoplastic Behaviour and Microstructure Evolution of Stainless Steel 316L10.3390/ma15207064 ↗

11. Dendritic Features of the Solidification Structure in a Large AA3004 Direct Chill (DC) Cast Ingot10.1007/s11663-022-02423-7 ↗

12. Analytical design of disk-type milling cutter with multiple inserts and CNC milling simulation of screw rotors considering grinding stock10.1016/j.mechmachtheory.2022.104724 ↗

13. Motion matters: the role of milling ball trajectories in mechanochemical reactions10.1039/D5MR00112A ↗

14. Milling-grinding of sapphire domes with brazed diamond tools force modelling and wear mechanisms10.1088/2053-1591/ae2dcb ↗

15. Study on the Effect of Multi-Laser-Assisted Cutting on the Cutting Mechanism of FeCoCrNiAl0.6 High-Entropy Alloy

16. Laser Cutting of Aluminum Alloys Using Pulsed Radiation from a CO2 Laser under Conditions of an Optical Discharge in an Argon Jet10.3103/S1068335623220116 ↗

17. Primary investigation of oxidation influence on the cutting front profile during high-thickness laser cutting10.2351/7.0001742 ↗

18. On Machining Profile Accuracy in the Modified Electrochemical Machining Process10.1007/s40010-024-00890-y ↗

19. Electrochemical machining post-processing of additively manufactured nickel-based superalloys via laser directed energy deposition10.1080/00202967.2024.2414560 ↗

20. Gap compensation control method for robotic electrochemical milling machining based on multi-physics field coupling10.1007/s00170-024-14570-z ↗

21. Forming characteristics and precision control method of Ti60 titanium alloy ultra-thin hyperbolic shell in electro-assisted drawing10.1016/j.jmrt.2025.05.056 ↗

22. Electro-thermal-mechanical coupled crystal plasticity modeling of Ni-based superalloy during electrically assisted deformation10.1016/j.ijplas.2022.103397 ↗

23. Crystal plasticity modeling of electropulsing induced plasticity in metals10.1016/j.ijplas.2023.103828 ↗

24. Modified constitutive models for Inconel 718 considering current density and temperature in electrically assisted forming process10.1016/j.cja.2023.12.007 ↗

25. Dislocation density based modelling of electrically assisted deformation process by finite element approach10.1016/j.ijmecsci.2022.107433 ↗

26. High-temperature flow behavior and processing map of Inconel 625 alloy under electric heating10.1016/j.jmrt.2025.08.014 ↗

27. An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation10.1016/j.msea.2013.07.037 ↗

28. X. Li, Performance analysis of scCO2 closed Brayton cycle applied to aero engine thermal protection considering flow and heat transfer characteristics inside the scCO2-fuel heat exchanger, (2026). https://doi.org/10.1016/j.supflu.2025.106787.10.1016/j.supflu.2025.106787 ↗

29. J. Shen, Numerical and experimental study on the structural-functional integrated bypass duct air-to-air heat exchanger, (2026). https://doi.org/10.1016/j.applthermaleng.2026.130475.10.1016/j.applthermaleng.2026.130475 ↗

30. W. Liu, Experimental analysis and thermodynamic modeling for multilevel heat exchange system with multifluid in aero engines, (2025). https://doi.org/10.1016/j.energy.2025.134373.10.1016/j.energy.2025.134373 ↗

31. Experimental Investigation of Delta Phase Precipitation in Inconel 625 Superalloy Aged at 550, 625 and 725 °

32. Oxidative wear behaviors of Inconel 625 alloy in a simulated rotary calcination furnace environment at 600 and 800 °

33. Fatigue crack initiation mechanisms in Inconel 718 from MC carbide10.1016/j.ijplas.2026.104630 ↗

34. Precipitates in Additively Manufactured Inconel 625 Superalloy10.3390/ma12071144 ↗

35. Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion10.1016/j.msea.2023.145508 ↗

36. Failure of Alloy 625 tube stub ends – Effect of primary nitrides10.1016/j.engfailanal.2013.03.018 ↗

37. Towards Automatic Detection of Precipitates in Inconel 625 Superalloy Additively Manufactured by the L-PBF Method10.3390/ma14164507 ↗

38. Microstructure and Selective Corrosion of Alloy 625 Obtained by Means of Laser Powder Bed Fusion10.3390/ma12111742 ↗

39. Optimization of the Mechanical and Corrosion Resistance of Alloy 625 through Aging Treatments10.3390/cryst14020139 ↗