journal article·2009-01

Sparking plasma sintering of nanometric tungsten carbide

Jinfeng Zhao, Troy Holland, Cosan Unuvar, Zuhair A. Munir

Publisher page

Abstract

Abstract The consolidation of nanometric powders of WC by the spark plasma sintering (SPS) method was investigated over the temperature range 1425–1800 °C under a uniaxial pressure of 126 MPa. Nominally stoichiometric WC powders with a grain size in the range 40–70 nm could be consolidated to near theoretical densities (99.1%) with a grain size of 305 nm when heated at a high rate to 1750 °C with no hold time. The sintered material, however, contained W2C and the effect of addition of carbon on the presence of this phase was investigated with these powders and with powders having a grain size of 12 nm. The effect of carbon on abnormal grain growth (AGG) was investigated as a function of temperature and carbon addition. The effect of heating rate up to the sintering temperature and the hold time at temperature was also investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Toth · 1971
2. Sintering features of cemented carbides WC-Co processed from fine powders10.1016/S0263-4368(01)00004-X ↗
3. An experimental study of the sintering of nanocrystalline WC-Co powders10.1016/j.ijrmhm.2005.04.014 ↗
4. WC grain growth during the early stages of sintering10.1016/j.ijrmhm.2005.11.009 ↗
5. Abnormal growth of faceted (WC) grains in a (Co) liquid matrix10.1007/BF02652373 ↗
6. On the formation of very large WC crystals during sintering of ultrafine WC-Co alloys10.1016/S0263-4368(01)00069-5 ↗
7. Effects of AGG on fracture toughness of tungsten carbide10.1016/j.msea.2006.09.076 ↗
8. Microstructure of binderless tungsten carbides sintered by spark plasma sintering process10.1016/S0921-5093(03)00151-5 ↗
9. Microstructure evolution in the cemented carbides WC-Co. I. Effect of the C/W ratio on the morphology and defects of the WC grains10.1002/1521-396X(200209)193:2<271::AID-PSSA271>3.0.CO;2-O ↗
10. Synthesis of WC-W2 C composite ceramics by reactive resistance-heated hot pressing and their mechanical properties10.2497/jjspm.54.281 ↗
11. On the Ostwald ripening theory10.1016/0001-6160(82)90004-9 ↗
12. Abnormal grain growth of WC with small amount of cobalt10.1080/14786430701694309 ↗
13. Formation of anomalous large grains in tungsten carbide-cobalt alloy observed by cobalt infiltration
14. Abnormal grain growth and grain boundary faceting in model Ni-based superalloy10.1016/S1359-6454(00)00119-1 ↗
15. Consolidation and properties of binderless sub-micron tungsten carbide by field-activated sintering10.1016/j.ijrmhm.2004.08.003 ↗
16. X-ray line broadening from filed aluminum and tungsten10.1016/0001-6160(53)90006-6 ↗
17. High meta-stability of tungsten sub-carbide W2C formed from tungsten/carbon powder mixture during eruptive heating in a solar furnace10.1016/j.ijrmhm.2006.03.001 ↗
18. Spark plasma sintering and characterization of bulk nanostructured fully stabilized zirconia: Part I. Densification studies10.1557/JMR.2004.0423 ↗
19. An analysis of grain boundaries and grain growth in cemented tungsten carbide using orientation imaging microscopy10.1007/s11661-006-0032-z ↗
20. Study of nanostructured WC-Co composites10.1016/0263-4368(95)92675-A ↗
21. One step synthesis and densification of ultra-fine WC by high-frequency induction combustion10.1016/j.ijrmhm.2005.04.004 ↗