journal article·2000-01

Dispersing WC–Co powders in aqueous media with polyethylenimine

Eric Laarz, Lennart Bergström

Publisher page

Abstract

Abstract The use of aqueous WC–Co suspensions for powder metallurgical processing of hard metal powders is expected to have environmental as well as economic advantages over the currently used systems with organic solvents. Without a suitable dispersing agent, however, poor mixing and aggregation of the different particulate constituents will occur in water and requirements on homogeneity and colloidal stability of the hard metal slurry cannot be met. We evaluated the effect of polyethylenimine (PEI) on the flow properties of concentrated aqueous WC–Co suspensions. The investigated parameters were polymer concentration, polymer molecular weight, pH, powder solubility, and ageing time. We found that simple mixing of powder, water, and PEI (at concentrations above 0.3 wt%) is sufficient to obtain well-dispersed, low-viscous suspensions without the need for pH adjustment or further additives. Almost identical flow behavior was observed over the investigated pH range 7–10.8. Effects of ageing and powder solubility on the colloidal stability were negligible over the investigated time span of 36 h. Adsorption of PEI with M w =10,000 results in thinner adsorbed layers as compared to PEI with M w =25,000, which is reflected by a lower suspension viscosity at high solids loading (40 vol%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Powder processing science and technology for increased reliability10.1111/j.1151-2916.1989.tb05945.x ↗
2. Shanefield DJ. Organic additives and ceramic processing. 2nd ed. Boston: Kluwer Academic Publishers; 199610.1007/978-1-4613-1433-2 ↗
3. Pugh RJ. Dispersion and stability of ceramic powders in liquids. In: Pugh RJ, Bergström L, editors. Surface and Colloid Chemistry in Advanced Ceramics processing. New York: Marcel Dekker; 1994. p. 127–192
4. Whitney · 1994
5. German · 1994
6. Cobalt (II) oxide solubility and phase stability in alkaline media at elevated temperatures10.1023/A:1021728113762 ↗
7. Oxidation and dissolution Of tungsten carbide powder in water
8. Horn D. Polyethylenimine – physicochemical properties and applications. In: Goethals EJ, editor. Polymeric amines and ammonium salts. Oxford: Pergamon Press; 1979. p. 333–355
9. Characterization of polyethylenimine10.1080/00222337008081731 ↗
10. Bergström L. Rheology of concentrated suspensions. In: Pugh RJ, Bergström L, editors. Surface and colloid chemistry in advanced ceramics processing. New York: Marcel Dekker; 1994. p. 193–244
11. Stability of aqueous a-Al2O3 suspensions with poly (methacrylic acid) polyelectrolyte10.1111/j.1151-2916.1988.tb05855.x ↗
12. Interparticle forces arising from adsorbed polyelectrolytes in colloidal suspensions10.1016/0927-7757(94)03010-W ↗
13. Rheological properties of Al2O3–SiC whisker composite suspensions10.1007/BF00355933 ↗
14. Rheological properties of concentrated, non-aqueous silicon nitride suspensions10.1111/j.1151-2916.1996.tb08074.x ↗
15. Probing polymeric stabilization in non-aqueous media by direct measurements10.1111/j.1151-2916.2000.tb01174.x ↗