Effects of Mo/Cr single-doping and Mo Cr co-doping on the TiC/steel Interface in metal matrix composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Microstructure and mechanical properties of S30432 steel modified by trace TiC/TiB2 nano-particles10.1016/j.msea.2023.145049 ↗
2. Simultaneous enhancements of strength, ductility, and toughness in a TiB reinforced titanium matrix composite10.1016/j.actamat.2023.118995 ↗
3. Application of ceramic nanoparticles in microstructure manipulation and simultaneously strengthening toughness and wear resistance of tool and die steels10.1016/j.ceramint.2023.02.027 ↗
4. Yin Li, song W W, microstructure and tribological properties of titanium matrix composites reinforced with in situ synthesized TiC particles10.1016/j.matchar.2020.110633 ↗
5. Effects of TiC addition on microstructure, microhardness and wear resistance of 18Ni300 maraging steel by direct laser deposition10.1016/j.jmatprotec.2021.117213 ↗
6. Enhancing high-temperature properties of stainless steel composite with titanium carbide reinforcement: a study on coefficient of thermal expansion, thermal conductivity, and strength10.1016/j.jmrt.2023.07.162 ↗
7. Simultaneously enhanced strength and toughness of cast medium carbon steel matrix composites by trace nano-sized TiC particles10.1016/j.msea.2021.141485 ↗
8. The effect of heat treatment on microstructure and properties of laser-deposited TiC reinforced H13 steel matrix composites10.1016/j.ijleo.2020.164286 ↗
9. Fracture toughness of a hot work tool steel-TiC composite produced by mechanical milling and spark plasma sintering10.1016/j.msea.2017.10.053 ↗
10. Grain refinement and strengthening of 316L stainless steel through addition of TiC nanoparticles and selective laser melting10.1016/j.msea.2021.142460 ↗
11. Fabrication of in-situ Al2O3 reinforced nanostructure 304 stainless steel matrix composite by self-propagating high temperature synthesis process10.1016/j.matdes.2015.06.138 ↗
12. Microstructure and wear properties of TiC strengthened high-manganese steel matrix composites fabricated by hyper eutectic solidification
13. Effects of Mn on the interface bonding and mechanical properties of TiC reinforced steel matrix composites10.1016/j.ceramint.2024.02.153 ↗
14. Effect of Ni on the mechanical and corrosion properties of TiC-reinforced steel matrix composite
15. Influence of Mo on the microstructure and mechanical properties of TiC-based cermets10.1007/s12598-010-0127-y ↗
16. Characterization of microstructure and tensile fracture behavior in a novel infiltrated TiC-steel composite10.1016/j.scriptamat.2015.09.028 ↗
17. TiC-(Ti,M)C core-rim structures in solid-state manufactured steel-based MMCs10.1016/j.matchar.2019.109880 ↗
18. Effect of molybdenum on interface properties of titanium carbide reinforced Fe composite10.1016/j.jmst.2021.08.047 ↗
19. Effect of Mo addition mode on the microstructure and mechanical properties of TiC-high Mn steel cermets10.1016/j.ceramint.2019.11.023 ↗
20. Corrosion resistance of powder metallurgy processed TiC/316L composites with Mo additions10.1007/s11837-015-1427-3 ↗
21. Effect of Cr doping on oxidation resistance and oxidation mechanism of TiC reinforced steel matrix composites: experiments and first-principles calculations10.1007/s12540-023-01447-1 ↗
22. Interfacial phenomena in Fe-TiC systems and the effect of Cr and Ni10.1515/htmp-2012-0102 ↗
23. Adding Cr and Mo simultaneously enhances the strength and impact toughness of TiC microparticle-reinforced steel matrix composites at high temperatures10.1016/j.jallcom.2022.167531 ↗
24. Superior tensile fracture strength of hot isostatically pressed TiC-steel metallic composite fabricated by a novel infiltration10.1016/j.msea.2019.138260 ↗
25. Effects of different alloying additives X (X = Si, Al, V, Ti, Mo, W, Nb, Y) on the adhesive behavior of Fe/Cr2O3 interfaces: a first-principles study10.1016/j.commatsci.2015.07.031 ↗
26. Effects of alloying elements X (X=Zr, V, Cr, Mn, Mo, W, Nb, Y) on ferrite/TiC heterogeneous nucleation interface: first-principles study10.1016/S1006-706X(17)30047-X ↗
27. Pearson’s handbook desk edition, crystallographic data for intermetallic phases, vols. 1 and 2
28. Telaxation of crystals with the quasi-Newton method10.1006/jcph.1996.5612 ↗
29. Structure, bonding, and adhesion at the TiC(100)/Fe(011) interface from first principles10.1063/1.1631815 ↗
30. First-principles study of the matrix alloying effect of X (X=Cr, Mo, W, V, Ti, Si) on the bonding characteristics and mechanical properties of the NbC/Fe interface
31. The stability, fracture toughness and electronic structure at γ-Ni(101)/(Ti, Nb)C(011) interface: a first-principles investigation10.1016/j.apsusc.2019.143742 ↗
32. Effect of Ni interlayer on the microstructure, mechanical and corrosion properties of the dissimilar 1MnCrMoNi/X70 steels friction welding joint10.1080/13621718.2021.2013708 ↗
33. Effect of post-weld heat treatment on the joint of friction-welded 1MnCrMoNi steel10.1080/13621718.2021.1882654 ↗
34. First-principles study on ferrite/TiC heterogeneous nucleation interface10.1016/j.jallcom.2012.12.099 ↗
35. First-principles-aided design of a new Ni-base superalloy: influence of transition metal alloying elements on grain boundary and bulk cohesion10.1016/j.actamat.2014.08.047 ↗
36. Cohesion strength and fracture toughness of Mo-TiC interfaces10.1016/j.surfcoat.2019.125158 ↗
37. Effects of alloying elements X (Cr, Fe and Mo) on the interface properties of γ-Ni(110)/TiC(110) in TiC-particles reinforced NMCs: first-principles study10.1016/j.optlastec.2022.108870 ↗
38. Combined experiment and first-principles study of the formation of the Al2O3 layer in alumina-forming austenitic stainless steel10.1039/C7RA00860K ↗
39. Electronic theory of interface characteristics of ZA27/CNT10.7498/aps.56.4075 ↗
40. Effects of alloying elements X (Cr, Mn, Mo, Ni, Si) on the interface stability of TiC (001)/γ-Fe (001) in TiC/316L stainless steel composite formed by selective laser melting: first principles and experiments10.1007/s42114-021-00212-5 ↗
41. Comparison of the effects of Mg and Zn on the interface mismatch and compression properties of 50 vol% TiB2/Al composites10.1016/j.ceramint.2021.04.234 ↗
42. Aligning graphene in bulk copper: nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity10.1016/j.carbon.2017.02.089 ↗
43. Enhancing the strength-ductility synergy of Fe-based composites by changing interface bonding between matrix and TiCx with various stoichiometric ratios10.1016/j.ceramint.2022.07.104 ↗
44. First-principle study on the segregation and strengthening behavior of solute elements at grain boundary in BCC iron10.1016/j.jmst.2024.01.005 ↗
45. Impact of carbon segregation on transition carbides and cementite precipitation during tempering of low carbon steels: experiments and modeling10.1016/j.actamat.2024.119919 ↗
46. Effect of Mo and Cr on the microstructure and properties of low-alloy wear-resistant steels10.3390/ma17102408 ↗
47. Effect of cooling rate and composition on microstructure and mechanical properties of ultrahigh-strength steels10.1007/s42243-019-00276-0 ↗
48. The importance of interfacial stress-affected zone in evading the strength-ductility trade-off of heterogeneous multi-layered composites10.1016/j.ijplas.2022.103485 ↗
49. Interfacial microstructures, residual stress and mechanical analysis of hot isostatic pressing diffusion bonded joint of 93W–4.9Ni–2.1Fe alloy and 30CrMnSiNi2A steel10.1016/j.fusengdes.2020.111602 ↗
50. First principles calculation of occupancy, bonding characteristics and alloying effect of Cr, Mo, Ni in bulk α-Fe(C)