journal article·2022-08

Effects of swift heavy ions at different fluencies on WC-6Co hard metal alloy

Ertuğrul Demir, Evgeni Popov, Matlab Mirzayev, Lyubomir Slavov, Dimitar Neov, Alexander Donkov, Krzysztof Siemek, Tatiana Vershinina, Ivaylo Genov, Anatolii Beskrovnyi, Vladimir Skuratov, Kiril Krezhov, Pawel Horodek, Fadahat Mamedov, Aygul Valizade, Özlem Vural

Publisher page

Abstract

Tungsten carbide hard metal alloy with 6% by weight cobalt was studied before and after irradiation at different fluencies with 167 MeV 132 Xe ions. Raman spectroscopy, X-ray diffraction, neutron diffraction and positron lifetime spectroscopy were employed in order to assess the microstructural evolution in the material upon irradiation fluence increase. Analysis of the Raman spectrum for the pristine, non-irradiated material unveils that the surface is composed of a graphite-like phase and highly oxidized tungsten atoms spread in the carbon matrix. All characteristic peaks of tungsten carbide (WC) and possible cobalt phases are either missing or strongly overlapped in all Raman spectra. Bonding between tungsten and oxygen atoms broke upon irradiation and total deoxidation of the surface is detected for the two highest fluencies investigated at 5 × 10 13 ions/cm 2 and 3,83 × 10 14 ions/cm 2 . Increasing the irradiation dose causes amorphization of the carbon phase on the surface accompanied by “up and down” trend of change in carbon cluster size. The Raman spectra analysis also unveils, that molecular nitrogen (N 2 ) from the atmosphere penetrates the carbon matrix upon irradiation. The results from the X-ray and neutron diffraction reveal that the main phase in the material is δ-WC and also give information about changes of the lattice parameters with increasing fluence. Reorganization of the induced point defects to dislocation defects as a function of the irradiation dose is discussed, but no phase transition of the main δ-WC phase is detected. Steady increase of compressive internal stress with increasing irradiation dose is noted by XRD. The tendency is not monotonic and the stress leans towards saturation at the highest fluence, with the highest value of −5.26 GPa. The Positron lifetime spectroscopy measurements show the presence of short lifetime component ranging from 170 ps to 190 ps, interpreted as small vacancy clusters. The intensities of the different positron lifetime components vary with the irradiation dose non-monotonically.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Recent progress in DEMO fusion core engineering: improved segmentation, maintenance and blanket concepts10.1016/j.fusengdes.2007.02.034 ↗
2. Tritium inventory in ITER plasma-facing materials and tritium removal procedures10.1088/0741-3335/50/10/103001 ↗
3. Plasma facing and high heat flux materials - needs for ITER and beyond10.1016/S0022-3115(02)01175-3 ↗
4. Materials for the plasma-facing components of fusion reactors10.1016/j.jnucmat.2004.04.005 ↗
5. Overview on fabrication and joining of plasma facing and high heat flux materials for ITER10.1016/S0022-3115(02)01070-X ↗
6. Effect of cobalt content on the microstructure and mechanical properties of coarse grained WC-co cemented carbides fabricated from chemically coated composite powder10.1016/j.jallcom.2018.06.366 ↗
7. Recent developments toward the use of tungsten as armour material in plasma facing components10.1016/j.fusengdes.2007.01.003 ↗
8. SRIM–the stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
9. Modification of materials by irradiation of heavy ions with energies from keV to GeV10.1016/j.radmeas.2005.06.026 ↗
10. Fundamental phenomena and applications of swift heavy ion irradiations10.1016/B978-0-12-803581-8.11644-3 ↗
11. Neutron irradiation effects on tungsten materials10.1016/j.fusengdes.2014.04.035 ↗
12. Displacement damage study in tungsten and iron for fusion neutron irradiation10.1016/j.fusengdes.2019.111370 ↗
13. Use of MeV energy ion accelerators to simulate the neutron damage in fusion reactor materials10.1016/j.fusengdes.2019.02.065 ↗
14. Shielding materials in the compact spherical tokamak10.1098/rsta.2017.0443 ↗
15. European materials development: results and perspective10.1016/j.fusengdes.2019.02.063 ↗
16. Mechanical properties of tungsten: recent research on modified tungsten materials in Japan10.1016/j.jnucmat.2020.152506 ↗
17. Radiation-induced evolution of tungsten carbide in fusion reactors: accommodation of defect clusters and transmutation elements10.1021/acsaem.9b01990 ↗
18. Effect of 800 keV argon ions pre-damage on the heliumblister formation of tungsten exposed to 60 keV helium ions10.1016/j.jnucmat.2016.01.031 ↗
19. Irradiation hardening in pure tungsten before and after recrystallization10.1016/j.fusengdes.2015.06.192 ↗
20. Response of unalloyed tungsten to mixed spectrum neutrons10.1016/j.jnucmat.2019.03.045 ↗
21. Blister formation at subcritical doses in tungsten irradiated by MeV protons10.1016/j.jnucmat.2017.09.024 ↗
22. Damage studies on irradiated tungsten by helium ions in a plasma focus device10.1016/j.net.2019.10.003 ↗
23. Modelling W fuzz growth over polycrystalline W due to He ion irradiations at an elevated temperature10.1016/j.jnucmat.2021.152917 ↗
24. WC-cu thermal barriers for fusion applications10.1016/j.surfcoat.2018.02.086 ↗
25. A candidate fusion engineering material, WC-FeCr10.1016/j.scriptamat.2018.06.027 ↗
26. Influence of carbon content on fatigue strength of cemented carbides10.1016/j.ijrmhm.2022.105823 ↗
27. Investigation on morphology evolution of coarse grained WC-6Co cemented carbides fabricated by ball milling route and hydrogen reduction route10.1016/j.ijrmhm.2016.01.001 ↗
28. High-temperature oxidation and wear resistance of WC-co based coatings with WB addition10.1016/j.jeurceramsoc.2019.04.002 ↗
29. Chemical synthesis of WC-Co from water-soluble precursors: the effect of carbon and cobalt additions to WC synthesis10.1016/j.ijrmhm.2015.11.014 ↗
30. Spark plasma sintering of WC–Co tool materials prepared with emphasis on WC core–Co shell structure development10.1016/j.ijrmhm.2015.04.014 ↗
31. Landau · 1976
32. Mayer · 2020
33. Effect of irradiation time by electrons on the hardness for (tungsten carbide – 6% cobalt) alloys
34. A review on current research trends in electrical discharge machining (EDM)10.1016/j.ijmachtools.2006.08.026 ↗
35. Rodriguez-Carvajal · 1990
36. Effects of high-energetic 3He+ ion irradiation on tungsten-based composites10.1016/j.vacuum.2020.109934 ↗
37. Characterization of residual compressive stresses in layered ceramics by positron annihilation spectroscopy10.1016/j.jeurceramsoc.2012.06.006 ↗
38. LT10 program for solving basic problems connected with defect detection10.1016/j.phpro.2012.06.022 ↗
39. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
40. Indication of worn WC/C surface locations of a dry-running twin-screw rotor by the oxygen incorporation in tungsten-related Raman modes10.1063/1.4966145 ↗
41. Raman characterization of stacking in multi-layer graphene grown on Ni10.1016/j.carbon.2015.11.050 ↗
42. Classifying nanostructured carbons using graphitic indices derived from Raman spectra10.1016/j.carbon.2009.10.002 ↗
43. Carbide-derived carbons: WAXS and Raman spectra for detailed structural analysis
44. Origin of the 2450 cm−1 Raman bands in HOPG, single-wall and double-wall carbon nanotubes10.1016/j.carbon.2004.11.044 ↗
45. Origin of the low-frequency band in Raman spectra of multi-walled carbon nanotubes synthesized by the CVD method10.1134/S106378341307007X ↗
46. Layered tungsten oxide-based organic−inorganic hybrid materials: an infrared and Raman study10.1021/jp045066l ↗
47. Raman scattering study of the phonon dispersion in twisted bilayer graphene10.1007/s12274-013-0304-z ↗
48. Observation of low energy Raman modes in twisted bilayer grapheme10.1021/nl4013387 ↗
49. Low-temperature polymorphism in tungsten trioxide powders and its dependence on mechanical treatments10.1006/jssc.1998.8061 ↗
50. Electrochromic devices based on porous tungsten oxide thin films
51. Infrared and Raman study of WO3 tungsten trioxide and WO3xH2O tungsten trioxides hydrates
52. Characterization of CoWO4nano-particles produced using the spray pyrolysis10.1016/j.ceramint.2008.11.014 ↗
53. CoWO4 nanoparticles prepared by two methods displaying different structures and supercapacitive performances10.1016/j.electacta.2015.01.055 ↗
54. Thermal evolution of WC/C nanostructured coatings by Raman and in situ XRD analysis10.1002/ppap.200931004 ↗
55. Raman spectroscopy of CO2–acetone and CO2–ethanol complexes10.1016/j.cplett.2005.07.091 ↗
56. Raman spectroscopy investigation of mono-and diacyl-polyoxyethylene glycols10.1016/j.vibspec.2012.11.006 ↗
57. Mineral and fluid inclusions in diamonds from the Urals placers, Russia: evidence for solid molecular N2 and hydrocarbons in fluid inclusions10.1016/j.gca.2019.08.028 ↗
58. Insertion of N2 into the channels of AFI zeolite under high pressure10.1038/srep13234 ↗
59. Preparation of WC–W2C composites by arc plasma melting and their characterizations10.1016/j.ceramint.2012.10.016 ↗
60. Effect of substrate temperature variation on nanostructured WC films prepared using HFCVD technique10.1016/j.matlet.2007.09.020 ↗
61. Wear behaviour of WC–Co HVOF coatings at different temperatures in air and argon10.1016/j.wear.2015.01.035 ↗
62. General equation for the determination of the crystallite size La of nanographite by Raman spectroscopy10.1063/1.2196057 ↗
63. Raman spectrum of graphite10.1063/1.1674108 ↗
64. Ion and electron irradiation-induced effects in nanostructured materials10.1063/1.3318261 ↗
65. Mega-electron-volt proton irradiation on supported and suspended graphene: a Raman spectroscopic layer dependent study10.1063/1.3647781 ↗
66. Three-stage structural modification of carbon nanotubes by swift heavy ion irradiation10.1016/j.nimb.2012.05.031 ↗
67. Transformation of multi walled carbon nanotubes irradiated by swift heavy ions10.1016/j.nimb.2017.06.011 ↗
68. Damaged carbon nanotubes get healed by ion irradiation10.1063/1.3466774 ↗
69. Birkholz · 2006
70. Estimation of the size and internal structure of colloidal particles by means of r.ovrddot.ontgen rays
71. Synthesis and characterization of WC-6Co Nanocrystalline composite powder10.1016/S1875-5372(18)30169-3 ↗
72. Evolution of dislocation structure in neutron irradiated Zircaloy-2 studied by synchrotron x-ray diffraction peak profile analysis10.1016/j.actamat.2016.12.031 ↗
73. Characterization of ion-induced radiation effects in nuclear materials using synchrotron x-ray techniques10.1557/jmr.2015.6 ↗
74. Cobalt -carbon/silica nanocomposites prepared by pyrolysis of a cobalt 2, 2′-bipyridine terephthalate complex for remediation of cationic dyes10.1039/D0RA02752A ↗
75. MIKA: multigrid-based program package for electronic structure calculations10.1002/qua.10397 ↗
76. Positron annihilation characteristics in perfect and imperfect transition metal carbides and nitrides10.1051/jp4:1995115 ↗
77. Atomic defects in hexagonal tungsten carbide studied by positron annihilation10.1103/PhysRevB.61.5945 ↗
78. Hard alloys WC-Co (6 wt %) and WC-Co (10 wt %) based on nanocrystalline powders10.1134/S0012500811070068 ↗
79. Tungsten carbides: structure, properties and application in hardmetals
80. Formation and migration of point defects in tungsten carbide: unveiling the sluggish bulk self-diffusivity of WC10.1016/j.jeurceramsoc.2018.10.001 ↗