Formulation and testing of optimised coating properties with regard to tribological performance in cold forging and fine blanking applications
Source abstract
Abstract
Within the scope of a more environmentally friendly production, there is a trend to reduce the amount of additives in lubricants for fine blanking, as well as to abolish the workpiece pretreatment in cold forging applications. The tribological functions of the additives or the workpiece pretreatment are intended to be taken over by hard ceramic CVD or PVD coatings, applied to the surface of the tool elements. Many applications of hard ceramic coatings on tools for metal forming applications are known. However, every successful case appears to be based on a trial-and-error way of development. Therefore, this paper will present results in the characterisation of tribological conditions in cold forging and fine blanking processes. The tribological conditions are calculated using an approach on four different scales. Having analysed the tribological conditions that coatings are subjected to in the cold forging and fine blanking processes, models for the description of frictional and wear processes are presented. This leads to the formulation of optimised and desirable properties of coatings on tool elements. After formulation of the coating properties, the measurement of these properties will be discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Bartz WJ. Gesichtspunkte für die gezielte Auswahl von Schmierstoffen für die Umformung, Blech Rohre Profile, Heft 1, 1980
2. Friction stress and normal stress in bulk metal-forming processes10.1016/0378-3804(87)90061-1 ↗
3. The state of the art in cold forging lubrication10.1016/0924-0136(94)90100-7 ↗
4. Bestimmung steiler Spannungsprofile
5. Charakterisierung technischer Schichtsysteme mittels IR-Radiometrie thermischer Wellen10.1524/teme.1998.65.11.387 ↗
6. Berg G, Friedrich C, Broszeit E, Berger C, Kloos K-H, Staeves J, Schmoeckel D, Weber F-R, Oechsner H, Schulz A, Stock H-R, Mayr P. Reibverhalten von PVD-Werkzeugbeschichtungen in der Blechumformung, Bänder Bleche Rohre 1997;5
7. Chemical, mechanical and tribological characterization of ultra-thin and hard amorphous carbon coatings as thin as 3.5 nm: recent developments10.1016/S0925-9635(99)00158-2 ↗
8. Determination of elastic properties oh thin films by indentation measurements with a spherical indenter10.1016/S0257-8972(00)00552-1 ↗
9. The correlation between surface acoustic wave velocity and mechanical properties of TiN and TiNx coatings10.1016/S0263-4368(98)00045-6 ↗
10. DIN 50322. Kategorien der Verschleißprüfung, Deutsche Norm 50 322, Beuth Verlag; 1986
11. Doege · 1986
12. Friedrich C. Kontaktmechanik beschichteter Oberflächen am Beispiel PVDHartstoffschicht, Tribologie+Schmierungstechnik, 47. Jahrgang, 3/2000
13. Haack J, Birzer F. Feinschneiden, Feintool AG, Lyss, CH; 1977
14. Hufenbach W, Kunze K. Tribologische Kenngrößen in kurzer Zeit ermitteln, Industrieanzeiger 38/98
15. Growth, microstructure, and mechanical properties of arc evaporated TiCxN1−x(0⩽x⩽1) films10.1016/S0257-8972(00)00518-1 ↗
16. Plasma etching and ion implantation on silicon, characterized by laser-modulated optical reflectance10.1016/S0257-8972(99)00309-6 ↗
17. König W, Klocke F. Fertigungsverfahren, Bd. 5 Blechbearbeitung. Düsseldorf: VDI Verlag; 199510.1007/978-3-662-11733-0 ↗
18. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to the optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
19. Analysis of coating fracture and substrate plasticity induced by sperical indentors: diamond and diamond-like carbon layers on steel substrates10.1016/S0040-6090(00)01340-7 ↗
20. N.N. VDI-Richtlinie 3824. Qualitätssicherung bei der PVD- und CVDHartstoffbeschichtung, Beuth Verlag GmbH, Berlin
21. N.N. Vom Konturschneiden zur Umformtechnologie, Blech Rohre Profile 1998;10
22. A comparative study of adhesion test methods for hard coatings10.1016/S0257-8972(98)00827-5 ↗
23. New low-carbon steel for hot, warm, or cold forging10.1002/(SICI)1527-2648(200005)2:5<261::AID-ADEM261>3.0.CO;2-9 ↗
24. Rother B, Kazmanli KM. Characterization of hard coatings by depthsensing indentation measurements: indentor effects. Surf Coat Technol 1998;00:311–1810.1016/S0257-8972(97)00685-3 ↗
25. Rozenberg OA, Cekhanov YA, Shejkin SE. Wissenschaftliche Grundlagen für die Entwicklung verschleißfester, beschichteter Kaltumformwerkzeuge. Wissenschaftliche Zeitschrift der Technischen Universität “Otto von Guericke” Magdeburg 1989;33:Heft 8
26. A photoacoustic method for characterising thin films10.1016/S0257-8972(96)03147-7 ↗
27. Schulz J. Ist die zielgerichtete Entwicklung von Umformprodukten auf Basis von Prüfmaschinenwerten möglich? Tribologie+Schmierungstechnik, 47. Jahrgang, 3/2000
28. Singer F. Verfahren zur Vorbehandlung von Eisen- und Stahlwerkstücken für die spanlose Formgebung, z.B. das Ziehen, Strecken und Walzen, Reichspatentamt Patenschrift Nr. 673 405, 10. Juni 1934
29. Finite-element modeling of the stresses and fracture during the indentation of hard elastic films on elastic–plastic aluminium substrates10.1016/S0040-6090(99)00505-2 ↗
30. Stachowiak · 2001
31. Cracking resistance of thin hard coatings estimated by four-point bending10.1016/S0257-8972(96)03123-4 ↗
32. The generation of mechanically mixed layers (MMLs) during sliding contact and the effects of lubrication thereon10.1016/S0043-1648(00)00456-7 ↗