Characteristic and tribological behavior of amorphous carbon–containing CrAlCN coating by cathodic arc ion plating
Source abstract
Abstract
Amorphous carbon–containing CrAlCN coating was deposited on Cr12MoV steel by cathodic arc ion plating . The effect of amorphous carbon on the tribological performance of obtained coating under the different normal loads was investigated using a ball–on–disc tester, and the lubrication and wear mechanisms of amorphous carbon were discussed in detail. The results show that the CrAlCN coating is composed of AlN, CrN and CrC phases with the amorphous carbon. The average coefficient of friction of CrAlCN coatings under the normal loads of 2, 4 and 6 N are 0.458, 0.586, and 0.666, respectively, where the amorphous carbon plays a self–lubrication role in the friction process. The wear degree is deteriorated with the increase of normal load, and the wear mechanism is changed from abrasive wear to adhesive wear.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Effect of ultrasonic surface rolling processing on wear properties of Cr12MoV steel
2. Effect of laser absorption on picosecond laser ablation of Cr12MoV mold steel, 9Cr18 stainless steel and H13A cemented carbide10.1016/j.optlastec.2017.10.036 ↗
3. Research on ion nitriding temperature effect on wear resistance of Cr12MoV steel10.1016/j.phpro.2013.11.020 ↗
4. Microstructure, mechanical and tribological characterization of CrN/ DLC/Cr−DLC multilayer coating with improved adhesive wear resistance10.1016/j.apsusc.2017.12.266 ↗
5. Investigation of high power impulse magnetron sputtering deposited nanoscale CrN/NbN multilayer coating for tribocorrosion resistance
6. A near−frictionless and extremely elastic hydrogenated amorphous carbon film with self–assembled dual nanostructure10.1002/adma.201200085 ↗
7. Influence of the application of a PN+Cr/CrN hybrid layer on the improvement of the lifetime of hot forging tools10.1016/j.jmatprotec.2018.03.029 ↗
8. In−process structuring of CrN coatings, and its influence on friction in dry and lubricated sliding10.1016/S0043-1648(03)00342-9 ↗
9. Increasing of service times of nitrided and CrN coated dies for Al hot extrusion
10. An analysis on tribological performance of CrCN coatings with different carbon contents in seawater10.1016/j.triboint.2015.07.002 ↗
11. Effect of surface finishing such as sand–blasting and CrAlN hard coatings on the cutting edge’s peeling tools’ wear resistance10.1016/j.wear.2009.01.045 ↗
12. Investigation of the tribological properties of high−feed milled structures and Cr−based hard PVD−coatings10.1016/j.vacuum.2016.05.024 ↗
13. Abrasive wear performance of AlCrN–coated hot work tool steel at elevated temperatures under three–body regime10.1016/j.wear.2010.10.069 ↗
14. Influence of Al and Y content on the oxidation resistance of CrAlYN protective coatings for high temperature applications: new insights about the Y role10.1016/j.jallcom.2018.09.280 ↗
15. Working efficiency of cutting tools with multilayer nano–structured Ti–TiCN–(Ti,Al)CN and Ti–TiCN–(Ti,Al,Cr)CN coatings: Analysis of cutting properties, wear mechanism and diffusion processes10.1016/j.surfcoat.2017.10.027 ↗
16. Modification of tools for wood based materials machining with TiAlN/a–CN coating10.1016/j.mseb.2020.114540 ↗
17. The cutting properties and wear of the knives with DLC and W–DLC coatings, deposited by PVD methods, applied for wood and wood–based materials machining
18. Investigation and optimization of the tribo−mechanical properties of CrAlCN coatings using design of experiments10.1016/j.surfcoat.2016.07.110 ↗
19. The significance of carbon on the microstructure of TiAlNC coatings deposited by reactive magnetron sputtering10.1016/j.apsusc.2006.05.003 ↗
20. Effect of carbon on microstructure of CrAlCxN1−x coatings by hybrid coating system10.1016/S1003-6326(11)61065-0 ↗
21. Comparative investigation of TiAlC(N), TiCrAlC(N), and CrAlC(N) coatings deposited by sputtering of МАХ–phase Ti2−хCrхAlC targets10.1016/j.surfcoat.2009.05.036 ↗
22. Characterization and Tribological behavior of TiAlN/TiAlCN multilayer coatings10.1115/1.4039723 ↗
23. Syntheses and mechanical properties of CrAlC1–xNx coatings by a hybrid coating system10.3938/jkps.54.1212 ↗
24. Laser–clad FeCrAl/TiC composite coating on ferrite/martensitic steel: significant grain refinement and wear resistance enhancement induced by adding TiC10.1016/j.surfcoat.2023.129272 ↗
25. Surface characteristics and wear depth profile of the TiN, TiAlN and AlCrN coated stainless steel in dry sliding wear condition10.1016/j.surfin.2016.10.008 ↗
26. Structural optimisation and synthesis of multilayers and nanocomposite AlCrTiSiN coatings for excellent machinability10.1016/j.surfcoat.2015.07.033 ↗
27. Refinement effect of C addition on the Cr phase in the as–cast cu–Cr alloys10.1016/j.vacuum.2020.109485 ↗
28. Phase composition of Cr–C thin films deposited by a double magnetron sputtering system10.1002/1096-9918(200008)30:1<544::AID-SIA814>3.0.CO;2-7 ↗
29. XPS analysis of aluminum nitride films deposited by plasma source molecular beam epitaxy10.1002/sia.2874 ↗
30. Redistribution of π and σ electrons in boron–doped graphene from DFT investigation10.1016/j.apsusc.2019.03.109 ↗
31. Comparative computational study on C–C/C–N/C–Br bond formations in Rh(III)–catalyzed C–H functionalizations: Stepwise versus concerted mechanisms10.1016/j.jorganchem.2018.02.012 ↗
32. A theoretical study on the chemical bonding of 3d–transition–metal carbides10.1016/S0038-1098(02)00034-0 ↗
33. Investigation of corrosion protection with conductive chromium–aluminum carbonitride coating on metallic bipolar plates10.1016/j.vacuum.2023.112084 ↗
34. Studying disorder in graphite–based systems by Raman spectroscopy10.1039/B613962K ↗
35. Graphene–mediated enhanced Raman scattering and coherent light lasing from CsPbI3 perovskite nanorods
36. Buffer layers inhomogeneity and coupling with epitaxial graphene unravelled by Raman scattering and graphene peeling10.1016/j.carbon.2020.03.027 ↗
37. Raman spectroscopy of graphene and graphite: disorder, electron–phonon–coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
38. Chiral discrimination of amino acids using phosphorene assisted graphene–enhanced Raman spectroscopy10.1016/j.aca.2020.06.067 ↗
39. Raman scattering efficiency of graphene10.1103/PhysRevB.87.205435 ↗
40. Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests10.1016/j.surfcoat.2015.11.040 ↗
41. Toughness of hard nanostructured ceramic thin films10.1016/j.surfcoat.2006.07.020 ↗
42. Investigation of the adhesion strength and deformation behavior of in situ fabricated NbC coatings by scratch testing10.1016/j.surfcoat.2016.05.004 ↗
43. In situ nanostructured (TiCr)CN coating by reactive plasma spraying10.1016/j.ceramint.2017.09.234 ↗
44. Comparative investigation of TiAlC(N), TiCrAlC(N), and CrAlC(N) coatings deposited by sputtering of МАХ–phase Ti2−CrAlC targets10.1016/j.surfcoat.2009.05.036 ↗
45. Structure and tribological behavior of CrAlCN coating in artificial seawater10.1088/2051-672X/ac1f7d ↗
46. Microstructure, electrochemical and tribocorrosion behaviors of CrCN nanocomposite coating with various carbon content10.1016/j.surfcoat.2021.126997 ↗
47. Structural and mechanical properties of carbon incorporation in DC/HiPIMS CrAlN coatings10.1016/j.surfcoat.2019.06.053 ↗
48. Nano–structured CrN/CNx multilayer films deposited by magnetron sputtering10.1016/j.compscitech.2007.11.002 ↗
49. Multilayer interfaces to achieve excellent corrosion and tribological performances for CrAlCN nanocomposite coating in the seawater10.1016/j.matchemphys.2023.127689 ↗
50. Tribological and oxidation behaviour of TiAlCN/VCN nanoscale multilayer coating deposited by the combined HIPIMS/(HIPIMS–UBM) technique10.1016/j.surfcoat.2010.10.049 ↗
51. Microstructure, mechanical properties and high–speed dry–cutting performance of AlCrSiCN composite coatings10.1016/j.jmrt.2023.06.045 ↗
52. Comparative studies on microstructure and mechanical properties of CrN, Cr–C–N and Cr–Mo–N coatings10.1016/j.jmatprotec.2006.11.090 ↗
53. Tribological studies on multi–coated forming tools10.1016/j.jmapro.2019.11.021 ↗
54. Tribological behaviour and microstructure of TiCxN(1−x) coatings deposited by filtered arc10.1016/S0043-1648(02)00010-8 ↗
55. Wen · 2012
56. Structure and wear characteristics of TiCN nanocomposite coatings fabricated by reactive plasma spraying10.1016/j.surfcoat.2018.02.108 ↗
57. Corrosion and bio−tribological properties of Ti(CN)x hard coating on titanium alloy by the pulsed plasma electrolytic carbonitriding process10.1016/j.triboint.2014.07.023 ↗
58. Effect of TiC addition on the microstructure and properties of Ni3Ta–TaC reinforced Ni–based wear–resistant coating10.1016/j.ceramint.2021.05.031 ↗