Preparation of Ti–Ta–(C,N) by mechanical alloying Ti(C,N) and TaC
Source abstract
Abstract
Abstract Ti(C,N) and TaC powders were mechanically alloyed and FAST/SPS sintered to produce dense (Ti,Ta)(C,N) cermets. Although a pronounced reduction in the crystallite size was observed after 48 hours of mechanical alloying, the bulk of the Ti(C,N) remained unreacted and the formation of solid solution took place only during sintering. The results were compared to cermets prepared under the same conditions from Ti(C,N) and Ta mixtures. These results showed that the use of Ti(C,N) and Ta mixtures is more effective and produces cermets with higher hardness (20.1 HV 5 ) in comparison with the materials produced from Ti(C,N) and TaC powders (12.7 HV 5 ).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Synthesis of nanocrystalline Ti(C, N) powders by mechanical alloying and influence of alloying elements on the reaction10.1016/j.ijrmhm.2008.05.002 ↗
2. Titanium-carbonitride-based hard alloys for cutting tools10.1016/0025-5416(88)90724-0 ↗
3. Ti(C, N) cermets—metallurgy and properties10.1016/0263-4368(95)00027-G ↗
4. Formation of core/rim structures in Ti(C,N)–WC–Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
5. Titanium carbonitride-based cermets: processes and properties10.1016/0921-5093(93)90588-6 ↗
6. Microstructure of Ti(CN)–WC–NbC-Ni cermets10.1111/j.1151-2916.2001.tb00750.x ↗
7. Effect of various carbides on the dissolution behavior of Ti(C0.7 N0.3) in a Ti(C0.7N0.3)–30Ni system10.1016/S0263-4368(01)00044-0 ↗
8. Electro-discharge machining performance of TiCN-based cermets10.1016/j.ijrmhm.2006.07.001 ↗
9. Carbides: transition metal solid-state chemistry
10. Effect of carbides on the microstructure and properties of Ti(C,N)-based ceramics10.1111/j.1151-2916.1999.tb02216.x ↗
11. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
12. Effect of tantalum on the properties and microstructure of hard alloys based on titanium carbonitride10.1007/BF02675885 ↗
13. The rheological and sintering behavior of W–Ni–Fe nano-structured crystalline powder10.1016/S0924-0136(02)01090-7 ↗
14. Preparation of (Ti, Ta)(C, N) by mechanical alloying10.1016/j.ijrmhm.2012.04.013 ↗
15. Indentation fracture of WC–Co cermets10.1007/BF00555296 ↗
16. Klug · 1974
17. Naidoo M. Preparation of (Ti, Ta)(C, N) by Mechanical Alloying. MSc dissertation, University of the Wiwatersrand, 2012.10.1016/j.ijrmhm.2012.04.013 ↗
18. Room-temperature mechanosynthesis of carbides by grinding of elemental powders10.1111/j.1151-2916.1991.tb04116.x ↗
19. Structure of high-melting carbides synthesized by mechanical alloying