Effect of Mo and Co additions on the microstructure and properties of WC-TiC-Ni cemented carbides
Source abstract
Abstract
In this work, the effects of 1.0 wt.% additions of Mo and Co on the microstructure and properties of WC-TiC-Ni cemented carbides were investigated using scanning electron microscope, mechanical properties tests, corrosion resistance and abrasion resistance tests. The results show that 1.0 wt.% Mo addition can refine the WC grains and increase the hardness. Moreover, with the addition of minor Mo, the corrosion resistance and abrasion resistance of alloys improved significantly. The addition of 1.0 wt.% Co can inhibit the growth of WC grains, improve the density and hardness slightly, and enhance the abrasion resistance of cemented carbides. However, the minor Co has negative effect for the corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Evolution of the WC grain shape in WC–Co alloys during sintering: effect of C content10.1016/j.ijrmhm.2008.06.001 ↗
2. Observation of Co nanoparticle dispersions in WC nanograins in WC-Co cermets consolidated from chemically synthesized powders10.1016/0965-9773(96)00028-1 ↗
3. Computer simulating the diffusion behavior of V and W in Co binder layer of WC–Co cemented carbide10.1016/j.jallcom.2006.07.031 ↗
4. The study of ternary carbides formation during SPS consolidation process in the WC–Co–steel system10.1016/j.ijrmhm.2009.05.001 ↗
5. Consolidation of ultra fine WC and WC–Co hard materials by pulsed current activated sintering and its mechanical properties10.1016/j.ijrmhm.2005.11.004 ↗
6. Sintering behavior and mechanical properties of WC–10Co, WC–10Ni and WC–10Fe hard materials produced by high-frequency induction heated sintering10.1016/j.ceramint.2007.11.003 ↗
7. WC grain growth and grain growth inhibition in nickel and iron binder hardmetals10.1016/S0263-4368(01)00070-1 ↗
8. Properties of ultra-fine grain binderless cemented carbide ‘RCCFN’10.1016/0263-4368(95)92676-B ↗
9. Advanced and new grades of WC and binder powder-their properties and application10.1016/S0263-4368(00)00002-0 ↗
10. A history of fine grained hardmetal10.1016/0263-4368(95)92671-6 ↗
11. A comparison of the microstructures of WC–VC–TiC–Co and WC–VC–Co cemented carbides10.1016/j.ijrmhm.2006.05.001 ↗
12. Wear behavior and tool life of modified WC-based cemented carbides10.1016/1044-5803(94)90155-4 ↗
13. Effect of WC/TiC grain size ratio on microstructure and mechanical properties of WC-TiC-Co cemented carbides10.1016/j.ijrmhm.2005.04.018 ↗
14. Growth behavior of rounded (Ti, W)C and faceted WC grains in a Co matrix during liquid phase sintering10.1016/j.actamat.2005.06.021 ↗
15. Effect of Mo2C on the microstructure and properties of WC-TiC-Ni cemented carbide10.1016/j.ijrmhm.2008.01.007 ↗
16. An empirical ranking of a wide range of WC-Co grades in terms of their abrasion resistance measured by the ASTM standard B 611–85 test10.1016/S0263-4368(96)00032-7 ↗
17. Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification10.1016/S0272-8842(03)00046-4 ↗
18. Mechanism of solid-state dissolution of WC in Co-based solutions10.1016/S1359-6454(02)00011-3 ↗
19. Nickel in hardmetals10.1016/0263-4368(92)90056-8 ↗
20. Materials science of cemented carbides-an overview10.1016/S0261-3069(01)00007-3 ↗
21. VC, Cr3C2 doped ultrafine WC–Co cemented carbides prepared by spark plasma sintering10.1016/j.ijrmhm.2010.09.004 ↗
22. The Co-Ni (Cobalt-Nickel) system
23. An alternative physical explanation of the Hall–Petch relation10.1016/j.actamat.2003.10.002 ↗
24. Corrosion of pure Mg as a function of grain size and processing route10.1002/adem.200800046 ↗
25. Microstructure of the Ni binder phase in a TiC-Mo2C-Ni cermet10.1016/S0968-4328(00)00077-9 ↗
26. A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF10.1016/j.surfcoat.2009.12.014 ↗
27. Effect of carbide additions on grain growth in TiC-Ni cermets10.1007/BF03027524 ↗
28. Effect of Mo addition on the microstructure and mechanical properties of ultra-fine grade TiC-TiN-WC-Mo2C-Co cermets10.1016/j.ijrmhm.2007.05.005 ↗
29. A simple synthesis of metallic Ni and Ni–Co alloy fine powders from a mixed-metal acetate precursor10.1016/S0254-0584(02)00185-2 ↗
30. Behaviour of TiC-base cermets in different wear conditions10.1016/S0043-1648(01)00569-5 ↗