Microstructure evolution, martensite transformation and mechanical properties of heat treated Co-Cr-Mo-W alloys by selective laser melting
Source abstract
Abstract
The influence of laser energy density and heat treatment on the microstructure and properties of Co-Cr-Mo-W alloys fabricated by selective laser melting (SLM) are investigated symmetrically. When the laser power, the scanning speed, and the scanning space are set as 160 W, 400 mm/s, and 0.07 mm, respectively, the SLM-ed Co-Cr-Mo-W alloys display high strength and good ductility simultaneously. The precipitates ranging from nano- to macro- scale are finely distributed in SLM-ed Co Cr alloys grains and/or along the grain boundaries in the heat treated alloys. Co-Cr-Mo-W alloys with an excellent combination of strength and ductility can be achieved by tailoring the microstructure and morphology of SLM-ed alloys during the heat treatment. The tensile strength, yield strength, and elongation are 1221.38 ± 10 MPa, 778.81 ± 12 MPa, and 17.2 ± 0.67%, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Effects of alloy additions on the microstructures and tensile properties of cast co-Cr-Mo alloy used for surgical implants10.1007/BF00544506 ↗
2. Tribological behavior of cast and wrought co-Cr-Mo implant alloys
3. Mo and W as alloying elements in co-based alloys-their effects on erosion-corrosion resistance10.1016/j.wear.2005.02.038 ↗
4. Strengthening of biomedical Ni-free co-Cr-Mo alloy by multipass “low-strain-per-pass” thermomechanical processing10.1016/j.actbio.2015.09.016 ↗
5. Direct laser sintering of metal powders: mechanism, kinetics and microstructural features10.1016/j.msea.2006.04.117 ↗
6. The use of rapid prototyping to assist medical applications10.1108/13552540610637273 ↗
7. Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process
8. Microstructural evolution and mechanical properties of direct metal laser-sintered (DMLS) CoCrMo after heat treatment10.1007/s11661-018-4771-4 ↗
9. Textures formed in a CoCrMo alloy by selective laser melting10.1016/j.jallcom.2015.01.096 ↗
10. Fabrication of co-Cr-Mo endoprosthetic ankle devices by means of selective laser melting (SLM)10.1016/j.matdes.2016.05.083 ↗
11. In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting10.1016/j.dental.2014.02.008 ↗
12. Formation of hcp martensite during the isothermal aging of an fcc co-27Cr-5Mo-0.05C orthopedic implant alloy10.1007/s11661-999-0267-6 ↗
13. Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering10.1016/j.msec.2014.12.009 ↗
14. Twinning and strain-induced f.c.c.→h.c.p. transformation on the mechanical properties of co-Ni-Cr-Mo alloys10.1016/0025-5416(76)90234-2 ↗
15. Strain-induced martensitic transformation near twin boundaries in a biomedical co-Cr-Mo alloy with negative stacking fault energy10.1016/j.actamat.2012.11.041 ↗
16. Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments10.1016/j.jallcom.2020.155664 ↗
17. Development of microstructure and mechanical properties during annealing of a cold-swaged Co-Cr-Mo alloy rod10.1016/j.jmbbm.2016.07.009 ↗
18. Mechanical properties of forged low Ni and C-containing Co-Cr-Mo biomedical implant alloy10.4028/www.scientific.net/MSF.475-479.2317 ↗
19. Effects of carbon concentration on microstructure and mechanical properties of as-cast nickel-free Co-28Cr-9W-based dental alloys10.1016/j.msec.2014.03.053 ↗
20. Assessment of precipitation behavior in dental castings of a Co-Cr-Mo alloy10.1016/j.jmbbm.2015.06.020 ↗
21. Effect of heat treatment on microstructure and mechanical properties of Ni and C-free Co-Cr-Mo alloys for medical applications10.2320/matertrans.46.1790 ↗
22. Microstructural evolution during solution treatment of Co-Cr-Mo-C biocompatible alloys10.1016/j.matchar.2012.03.006 ↗
23. Nishiyama · 1978
24. Work hardening mechanism in high nitrogen austenitic steel studied by in situ neutron diffraction and in situ electron backscattering diffraction10.1016/j.msea.2009.07.066 ↗
25. Effects of nitrogen addition on microstructure and mechanical behavior of biomedical Co–Cr–Mo alloys10.1016/j.jmbbm.2013.10.006 ↗
26. Origin of significant grain refinement in Co-Cr-Mo alloys without severe plastic deformation10.1007/s11661-012-1303-5 ↗
27. Nanoarchitectured Co-Cr-Mo orthopedic implant alloys: nitrogen-enhanced nanostructural evolution and its effect on phase stability10.1016/j.actbio.2012.12.013 ↗
28. Ultrafine grain refinement of biomedical Co-29Cr-6Mo alloy during conventional hot-compression deformation10.1007/s11661-009-9879-0 ↗
29. The effect of heating rate on the martensite to austenite transformation in Fe-Ni-C alloys10.1016/0001-6160(72)90077-6 ↗
30. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗