Wear mechanisms of WC-Co drill bit inserts against alumina counterface under dry friction: Part 2 — Graded WC-Co inserts
Source abstract
Abstract
The tribological behaviour of innovative graded cemented carbide inserts were studied by using a rotary tribometer and abrasive alumina counterfaces. This work completes the study made on commercial inserts with homogeneous cobalt content. Inserts with three types of graduation processes were considered: inserts with borides WCoB phases, imbibed inserts and inserts combining both processes (i.e. inserts with reactive imbibition). Physicochemical and mechanical measurements show that the WCoB phases increase the hardness towards the active surface and the imbibition increases the insert core fracture toughness. The wear tests indicate that the boride phases lower the friction coefficient. In addition, as for the commercial inserts, cemented carbide volumes with higher cobalt content also reduce the friction coefficient. Concerning the wear results, the boride phases improve the abrasion resistance. By applying a third body approach, the WCoB phases limit the introduction of cobalt binder in the source flow, the cohesion of alumina particles in the internal flow and the formation of an abrasive paste in the contact. The imbibition process, where the cobalt migration is controlled, does not affect the wear resistance by avoiding a cobalt enrichment of the cemented carbide near the active surface.
Source: openaire · Quality: candidate unverified · Source record ↗
References (15)
Show source-provided references
1. Functionally graded hardmetals10.1016/j.ijrmhm.2012.04.011 ↗
2. Gradient WC-Co hardmetals: theory and practice10.1016/j.ijrmhm.2011.12.010 ↗
3. Functionally graded hardmetals10.1016/S0925-8388(02)00232-3 ↗
4. Redistribution of molten cobalt in powder metallurgical WC-Co hard alloys10.1007/BF00814043 ↗
5. The migration of metal melts in sintered carbides
6. Equilibrium distribution of liquid during liquid sintering of composition gradient materials10.1016/j.actamat.2004.12.015 ↗
7. A new combination of coatings on carbide cutting tools10.1016/0257-8972(87)90079-X ↗
8. D. C. Pennington, Boron-treated hard metal, US Patent 4,961,780, (1990).
9. J. D. Knox, D. C. Pennington, Boron-treated hard metal, US Patent 5,116,416, (1992).
10. C. Colin, E. Lefort-Sorlier, A. Dourfaye, Process for manufacturing a part comprising a block of dense material constituted of hard particles and of binder phase having a gradient of properties, and resulting part, US Patent 8,602,131, (2013).
11. Gradation process by imbibition in WC-Co for mining tools application
12. Effect of gradation by reactive imbibition on commercial WC-Co drilling tools used in oil and gas industries
13. Reactive imbibition of WC-Co substrate for PDC cutters used in oil and gas and mining drilling
14. Microstructure development of WCoB-TiC based hard materials10.1016/S0263-4368(02)00104-X ↗
15. Yahiaoui · 2013