journal article·2017-12

Effect of high energy ball milling on structure and properties of 95W-3.5Ni-1.5Fe heavy alloys

M. Debata, T.S. Acharya, P. Sengupta, P.P. Acharya, S. Bajpai, K. Jayasankar

Publisher page

Abstract

Abstract In this article, an attempt is made to prepare tungsten heavy alloy (WHA) powder by high energy ball milling of 95 wt% W, 3.5 wt% Ni and 1.5 wt% Fe in a dual drive planetary ball mill (DDPBM). The present study mainly focusses on the effect of milling on density, microstructure and mechanical properties of sintered WHAs. The minimum crystallite size of 18 nm was observed in 15 h milled WHA powder. Sintering of WHAs was carried out at 1500 °C for 1 h in hydrogen atmosphere. The sintered samples prepared from un-milled and ball milled WHA powders were characterized for microstructure (SEM equipped with EDS) and mechanical properties (Rockwell hardness and nanoindentation). The internal attributes and uniformity in distribution of W spheroids in sintered WHA were investigated with X-ray microcomputed tomography (X-ray μ-CT). All sintered samples exhibited sintered density in the range of 97.1 to 98.6% theoretical. Uniform distribution of W spheroids in Ni-Fe matrix was observed in sintered samples. The mean grain size of sintered WHAs varies in the range of 22.7–31.1 μm and W-W contiguity (C WW ) ranges from 0.58–0.69. Despite relatively less density (97.1%), the sintered WHA prepared from 15 h milled powder offered good combination of bulk hardness ~ 64.8 HRA and elastic modulus ~ 431 GPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Sintered heavy alloys: a review
2. Lassner · 1999
3. German · 1994
4. Tungsten heavy alloys for ordnance and thermal management applications
5. Debata · 2004
6. Processing strategy for consolidating tungsten heavy alloys for ordnance applications10.1016/S0254-0584(00)00426-0 ↗
7. Test temperature and strain rate effects on the properties of a tungsten heavy alloy10.1007/BF02649263 ↗
8. German · 1985
9. Distribution of elements during the formation of sintered alloys of the system W-Ni-Fe10.1007/BF00774652 ↗
10. Proceedings of a symposium: Tungsten and tungsten alloys-recent advances
11. Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept10.1007/BF02586168 ↗
12. Characterisation of high energy planetary ball milled W based heavy alloys10.1179/174329006X94834 ↗
13. Morphology and microstructure characterization of 95W-3.5Ni-1.5Fe powder prepared by mechanical alloying
14. Amorphization and thermal stability of mechanical alloyed W-Ni-Fe10.1016/j.msea.2005.06.080 ↗
15. A comparison of the sintering characteristics of ball-milled and attritor-milled W–Ni–Fe heavy alloy10.1557/JMR.1996.0210 ↗
16. Refractory metal alloying: a new method for improving mechanical properties of tungsten heavy alloys10.1016/j.jallcom.2017.03.174 ↗
17. Rhenium alloying of tungsten heavy alloys
18. German · 1991 · 53
19. Densification behavior of nanocrystalline W-Ni-Fe composite powders prepared by sol-spray drying and hydrogen reduction process10.1016/j.jallcom.2009.09.050 ↗
20. Reduction investigation of WO3/NiO/Fe2O3 and synthesis of nanocrystalline ternary W-Ni-Fe alloy10.1016/j.jallcom.2008.04.057 ↗
21. Effect of the conditions of sintering W-Ni-Fe-Co heavy alloy nanopowders on the structure and density of compacted samples10.1134/S0036029507060109 ↗
22. Structure and properties of W-Ni-Fe-Co heavy alloys compacted from nanopowders10.1134/S0036029508010102 ↗
23. Preparation of fine-grained tungsten heavy alloys by spark plasma sintered W-7Ni-3Fe composite powders with different ball milling time10.1016/j.jallcom.2013.02.014 ↗
24. Effects of sintering temperature on fine-grained tungsten heavy alloy produced by high-energy ball milling assisted spark plasma sintering10.1016/j.ijrmhm.2012.02.017 ↗
25. A review on alloying in tungsten heavy alloys10.1002/9781118356074.ch59 ↗
26. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
27. Synthesis and characterization of silicon carbide by reaction milling in a dual-drive planetary mill10.1016/j.msea.2007.01.080 ↗
28. Efficient synthesis and characterization of iron carbide powder by reaction milling10.1016/j.powtec.2008.09.020 ↗
29. Microstructural characterization of oxide dispersion strengthened ferritic steel powder10.1016/j.jnucmat.2013.01.325 ↗
30. Optimization of milling parameters, processing and characterization of nano-crystalline oxide dispersion strengthened ferritic steel10.1016/j.powtec.2014.04.070 ↗
31. Rajamani · 2000
32. Cullity · 1956
33. Contiguity variation in tungsten spheroids of sintered heavy alloys10.1016/0026-0800(86)90076-5 ↗
34. Microstructure and mechanical properties of mechanically alloyed and solid-state sintered tungsten heavy alloys10.1016/S0921-5093(00)00968-0 ↗
35. Development of high density tungsten based scandate by spark plasma sintering for the application in microwave tube devices10.1016/j.ijrmhm.2016.09.002 ↗
36. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
37. Mechanical alloying and properties of immiscible Cu-20wt% Mo alloy10.1016/j.jallcom.2015.06.129 ↗
38. Ball charge dynamics in a planetary mill10.14356/kona.1995019 ↗
39. Centrifugal mill charge motion and power draw: comparison of DEM predictions with experiment10.1016/S0301-7516(99)00063-0 ↗
40. Effect of heating mode and sintering temperature on the consolidation of 90W-7Ni-3Fe alloys10.1016/j.jallcom.2010.09.008 ↗
41. Fine-grained 93W-5.6Ni-1.4Fe heavy alloys with enhanced performance prepared by spark plasma sintering10.1016/j.msea.2013.02.069 ↗
42. Tensile behavior change depending on the varying tungsten content of W-Ni-Fe alloys10.1016/j.ijrmhm.2006.12.003 ↗
43. Combination of mechanical alloying and two-stage sintering of a 93W-5.6Ni-1.4Fe tungsten heavy alloy10.1016/S0921-5093(02)00410-0 ↗
44. Mechanical alloying process of 93W-5.6Ni-1.4Fe tungsten heavy alloy10.1016/S0924-0136(96)02638-6 ↗
45. Effect of dislocation density during liquid phase sintering
46. Villars · 1997
47. Specializing in High Quality Heavy Metal Alloys, Midwest Tungsten Serv. (n.d.). https://www.tungsten.com/products/tungsten-alloy/ (accessed June 22 2017).
48. Nanoindentation response of novel hydroxyapatite-mullite composites10.1016/j.msea.2009.02.052 ↗
49. Anthony · 2011