journal article·2025-11

Core-shell structure-designed TiC-based ceramics with synergistic strength-toughness via low-temperature in-situ reaction sintering

Jia Yao, Boxin Wei, Qinghua Hou, Dong Wang, Lei Chen, Yujin Wang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (96)

Show source-provided references
1. Spark plasma sintering of TiC-based composites toughened by submicron SiC particles10.1016/j.ceramint.2012.12.002 ↗
2. Spark plasma sintering of TiC ceramic with tungsten carbide as a sintering additive10.1016/j.jeurceramsoc.2013.04.017 ↗
3. Fabrication and characterization of sintered TiC–SiC composites10.1016/j.jeurceramsoc.2010.10.010 ↗
4. Improvement in mechanical/physical properties of TiC-based ceramics sintered at 1500°C for inert matrix fuels10.1016/j.scriptamat.2015.11.024 ↗
5. Indentation hardness and fracture toughness in single crystal TiC0.9610.1016/0921-5093(95)10152-7 ↗
6. In-situ fabrication and characterization of TiC matrix composite reinforced by SiC and Ti3SiC210.1016/j.ceramint.2023.03.218 ↗
7. Oxidation behavior of nano-scaled and micron-scaled TiC powders under air10.1016/j.ijrmhm.2013.07.012 ↗
8. Spark plasma sinterability of TiC ceramics with different nitride additives10.1016/j.jtice.2021.05.004 ↗
9. Microstructural evolution during spark plasma sintering of TiC–AlN–graphene ceramics10.1016/j.ijrmhm.2021.105496 ↗
10. Strengthening of novel TiC–AlN ceramic with in-situ synthesized Ti3Al intermetallic compound10.1016/j.ceramint.2020.02.213 ↗
11. Microstructure–property correlation in nano-diamond and TiN added TiC-based ceramics10.1016/j.ceramint.2020.08.152 ↗
12. A novel spark plasma sintered TiC–ZrN–C composite with enhanced flexural strength10.1016/j.ceramint.2020.08.073 ↗
13. Beneficial role of carbon black on the properties of TiC ceramics10.1016/j.ceramint.2020.06.125 ↗
14. Characterization of spark plasma sintered TiC ceramics reinforced with graphene nano-platelets10.1016/j.ceramint.2020.04.189 ↗
15. A survey on spark plasma sinterability of CNT-added TiC ceramics10.1016/j.ijrmhm.2021.105471 ↗
16. Effect of cobalt content on high-temperature tribological properties of TiC-co coatings10.1016/j.ceramint.2018.05.021 ↗
17. Effect of Ni addition on the densification of TiC: a comparative study of conventional and microwave sintering10.1016/j.ijrmhm.2019.105165 ↗
18. Effect of Ni content on microstructures and mechanical properties of hot-pressed TiC–TiB2–Ni composite10.1016/j.msea.2016.05.053 ↗
19. Influence of Mo addition on the microstructure and mechanical properties of TiC-NiTi cermets10.1016/j.jallcom.2017.04.151 ↗
20. In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering10.1016/j.jmst.2017.03.006 ↗
21. A novel core-shell TiCx particle by modifying TiCx with B element and the preparation of the (TiCx + AlN)/Al composite10.1016/j.jallcom.2021.162448 ↗
22. Superior tensile fracture strength of hot isostatically pressed TiC–steel metallic composite fabricated by a novel infiltration10.1016/j.msea.2019.138260 ↗
23. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet – a review10.1016/j.matdes.2014.10.081 ↗
24. Development and application of tool wear: a review of the characterization of TiC-based cermets with different binders10.1016/j.cej.2014.06.078 ↗
25. Tribological performances of ZrC-Ni and TiC-Ni cermet reinforced PTA hardfacings at elevated temperatures10.1016/j.surfcoat.2016.11.099 ↗
26. Microstructure of spark plasma sintered TiC–TiB2–SiCw composite10.1016/j.matchemphys.2022.125877 ↗
27. Characterization of TiC ceramics with SiC and/or WC additives using electron microscopy and electron probe micro-analysis10.1016/j.jtice.2021.05.039 ↗
28. Study on the formation of core–rim structure in Ti(CN)-based cermets10.1016/j.ijrmhm.2012.03.012 ↗
29. Formation of a core/rim structure in Ti(C, N)-based cermets10.4150/KPMI.2006.13.1.010 ↗
30. Microstructure and mechanical properties of ultrafine Ti(CN)-based cermets fabricated from nano/submicron starting powders10.1016/j.ceramint.2004.09.013 ↗
31. Rim structure in Ti(C0. 7N0. 3)–WC–Ni cermets10.1111/j.1151-2916.2003.tb03551.x ↗
32. Mechanisms of surrounding structure formation in sintered TiC-Mo2C-Ni alloy
33. Formation of core/rim structures in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
34. Densification behavior and mechanical properties of spark plasma reaction sintered ZrB2–ZrC-B4C ceramics from B4C-Zr system10.1016/j.ceramint.2019.03.112 ↗
35. Super-strong materials for temperatures exceeding 2000 °C
36. Spark plasma sintering of TixTa1−xC0.5N0.5-based cermets: effects of processing conditions on chemistry, microstructure and mechanical properties10.1016/j.cej.2013.06.104 ↗
37. Effect of NbC content on microstructure and mechanical properties of W-NbC composites10.1016/j.ijrmhm.2017.09.008 ↗
38. Reactive hot pressing of super hard (Ti,Ta)(B,C)–(Ta,Ti)C composites10.1016/j.msea.2020.140292 ↗
39. Refractory carbide reinforced tungsten matrix composites10.1016/j.jallcom.2022.166342 ↗
40. Processing and properties of high-entropy ultra-high temperature carbides10.1038/s41598-018-26827-1 ↗
41. Influence of TiC content on microstructure and mechanical properties of (Ta, Ti)C ceramics10.1016/j.ijrmhm.2022.106031 ↗
42. Transient liquid phase sintering of tantalum carbide ceramics by using silicon as the sintering aid and its effects on microstructure and mechanical properties10.1016/j.matchemphys.2014.10.052 ↗
43. Reactive hot pressing of ZrC-SiC ceramics at low temperature10.1111/jace.12090 ↗
44. 2 - kinetics and mechanisms of densification
45. Harmonized toughening and strengthening in pressurelessly reactive-sintered Ta0.8Hf0.2C-SiC composite10.1016/j.jeurceramsoc.2018.08.021 ↗
46. Sintering mechanism and microstructure of TaC/SiC composites consolidated by plasma-activated sintering10.1016/j.ceramint.2019.09.229 ↗
47. Spark plasma sintering of TiC–SiCw ceramics10.1016/j.ceramint.2019.06.236 ↗
48. Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase10.1016/j.jeurceramsoc.2019.12.056 ↗
49. Design and fabrication of (Hf0.25Zr0.25Ta0.25Nb0.25)C–SiC ceramics with improved microwave absorbing properties via PDC route10.26599/JAC.2024.9220998 ↗
50. Single-source-precursor synthesis and air-plasma ablation behavior of (Ti,Zr,Hf)C/SiC ceramic nanocomposites at 2200 °C10.26599/JAC.2024.9220918 ↗
51. Dense Ti3SiC2 prepared by reactive HIP10.1023/A:1004664500254 ↗
52. Mechanical properties and mechanism of damage tolerance for Ti3SiC210.1016/S0167-577X(02)00716-4 ↗
53. Fabrication technology, research and development status, development trend of the ternary laminated structure MAX phase ceramics materials
54. Roles of silicon-layer in Ti3SiC2 materials response to helium irradiation: new insights from first-principles calculation10.1016/j.actamat.2015.07.015 ↗
55. Preparation and properties of Ti3SiC2-based corrosion mitigation coatings for SiCf/SiC PWR accident tolerant fuel cladding10.26599/JAC.2024.9220837 ↗
56. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
57. Structural, hardness and toughness evolution in Si-incorporated TaC films10.1016/j.ceramint.2018.02.144 ↗
58. Spark plasma sinterability of TaC-based composites co-doped with SiC, TiC and graphene10.1016/j.diamond.2022.109496 ↗
59. Microstructure and mechanical properties of TaC ceramics with 1–7.5 mol% Si as sintering aid10.1111/jace.14806 ↗
60. Phase reactions associated with the formation of Ti3SiC2 from TiC/Si powders10.1016/j.ceramint.2011.04.132 ↗
61. SPS parameters influence on Ti3SiC2 formation from Si/TiC: mechanical properties of the bulk materials10.1016/j.jallcom.2017.02.304 ↗
62. Novel TiC-based ceramic with enhanced mechanical properties by reaction hot-pressing at low temperature10.1016/j.jmrt.2023.03.111 ↗
63. Investigation of the effect of various parameters on the amount and morphology of nano-laminate MAX phase in Cf-C-SiC-Ti3SiC2 composite10.1016/j.ijrmhm.2017.11.010 ↗
64. Fabrication and characterization of some novel reaction-bonded silicon carbide materials10.1007/BF02403904 ↗
65. High-temperature mechanical and shape memory properties of TiPt–Zr and TiPt–Ru alloys10.1016/j.msea.2012.11.069 ↗
66. Solidification segregation-driven microstructural evolution of trace yttrium-alloyed TaMoNbZrTiAl refractory high entropy alloys10.1016/j.matchar.2022.112495 ↗
67. Densification during sintering in the presence of a liquid phase. I. Theory10.1063/1.1735155 ↗
68. Density functional study of carbon vacancies in titanium carbide
69. Densification, mechanical and thermal properties of ZrC1−x ceramics fabricated by two-step reactive hot pressing of ZrC and ZrH2 powders10.1016/j.jeurceramsoc.2017.09.027 ↗
70. Effect of silicon on grain refinement of aluminum produced by electrolysis10.2320/matertrans.44.2157 ↗
71. The effect of grain refinement and silicon content on grain formation in hypoeutectic Al–Si alloys10.1016/S0921-5093(98)00884-3 ↗
72. Core-shell structure: an effective feature for strengthening ZrB2 ceramics10.1016/j.scriptamat.2018.09.024 ↗
73. High-temperature reaction consolidation of TaC–TiB2 ceramic composites by spark-plasma sintering10.1016/j.jeurceramsoc.2014.08.007 ↗
74. Novel (Zr, Ti)B2-(Zr, Ti)C-SiC ceramics via reactive hot pressing10.1016/j.jeurceramsoc.2022.03.056 ↗
75. Microstructure, mechanical properties and thermal conductivity of (Ti0.5Nb0.5)C–SiC composites10.1016/j.ceramint.2021.11.225 ↗
76. Synthesis and sintering of Ti3SiC2–SiC composites through reactive hot-pressing of TiC and Si precursors10.1007/s12633-021-01207-z ↗
77. Synthesis, microstructure and mechanical properties of Ti3SiC2–TiC composites pulse discharge sintered from Ti/Si/TiC powder mixture10.1016/j.msea.2009.08.029 ↗
78. Novel α/β SiC-(Ti, Nb)B2 toughened (Ti, Nb)C-based composites with enhanced mechanical properties fabricated by in situ reactions sintering at low temperature10.1016/j.ceramint.2024.08.463 ↗
79. Design, preparation, and enhanced mechanical properties of novel plate-like grains toughened (Zr, Ti, W, Ta)C medium-entropy ceramics fabricated by in-situ reaction hot-pressing10.1016/j.jmrt.2024.07.045 ↗
80. Reactions in the system TiCx-TiB210.1007/BF00800242 ↗
81. Novel TiC-based composites with enhanced mechanical properties10.1016/j.jeurceramsoc.2021.05.008 ↗
82. Microstructure and mechanical properties of hot-pressed SiC-TiC composites10.1007/BF01184969 ↗
83. Microstructural evolution, mechanical and thermal properties of TiC-ZrC-Cr3C2 composites10.1016/j.ijrmhm.2019.01.008 ↗
84. Strengthened interfacial bonding and its effects on fracture mode of TaC ceramics with addition of B10.1016/j.jeurceramsoc.2019.12.013 ↗
85. Effects of LaB6 content on microstructure and mechanical properties of TaC-LaB6 composites10.1016/j.matchemphys.2018.04.060 ↗
86. Effects of adding 5–20mol% ZrC plus 5mol% Cu as a sintering aid on microstructure and mechanical properties of the TaC ceramics10.1016/j.ceramint.2016.07.156 ↗
87. Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites: effects of sintering temperatures10.1016/j.jeurceramsoc.2012.04.042 ↗
88. Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites10.1016/j.msea.2011.09.079 ↗
89. Microstructure and wear behavior of spark plasma sintered Ti3SiC2 and Ti3SiC2–TiC composites10.1016/j.ceramint.2012.11.058 ↗
90. Mechanical properties and oxidation behavior of SiCf/Ti3SiC2 composites prepared by hot isostatic pressing10.1111/ijac.13939 ↗
91. Mechanical properties optimization of Si3N4 ceramics by in-situ introduction of core-shell structural W-Fe5Si310.1016/j.compositesb.2020.108134 ↗
92. Analysis of pressureless sintering of titanium diboride ceramics with nickel, cobalt, and tungsten carbide additives10.1016/j.jeurceramsoc.2019.02.036 ↗
93. Novel Ti3SiC2-(Ti, Zr)B2 toughened (Ti, Zr)C-based composites with enhanced mechanical properties fabricated by dual in situ reactions hot-pressing at low temperature10.1016/j.jmrt.2024.05.226 ↗
94. Dependence of the microstructure and properties of TiC/Ti3SiC2 composites on extra C addition10.1016/j.ceramint.2012.04.049 ↗
95. Pressureless joining of silicon carbide using Ti3SiC2 MAX phase at 1500oC10.1016/j.ceramint.2020.02.155 ↗
96. Microstructure and mechanical properties of carbide reinforced TiC-based ultra-high temperature ceramics: a review10.3390/coatings11121444 ↗