Effect of ZrB2 and SiC addition on TiB2-based ceramic composites prepared by spark plasma sintering
Source abstract
Abstract
Abstract TiB2-based ceramic composites with different amounts of ZrB2 and SiC were prepared by spark plasma sintering at 1700 °C with an initial pressure of 40 MPa and a holding time of 10 min. The (TixZry)B2 solid solution was found in the sintered TiB2/ZrB2/SiC composites by XRD. The microstructural and mechanical properties of the prepared samples were investigated. The composite with the addition of 30 vol.% ZrB2 shows better comprehensive performances, and the bending strength and the fracture toughness of the composite are 780.5 MPa and 7.34 MPa m1/2, respectively. The generation of the (TixZry)B2 solid solution makes the microstructures of the composites finer and more homogeneous, which has played a very important role in grain refinement and interface fusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Reaction joining of SiC ceramics using TiB2-based composites10.1016/j.jeurceramsoc.2010.07.017 ↗
2. Tribological properties of TiB2 and TiB2–MoSi2 ceramic composites10.1016/j.jeurceramsoc.2005.01.054 ↗
3. A multilevel ceramic composite of TiB2-Ti0.9W0.1C-SiC prepared by in situ reactive hot pressing10.1016/0167-577X(96)00031-6 ↗
4. Microstructure and hydrogen storage properties of MgH2–TiB2–SiC composites10.1016/j.ceramint.2012.11.029 ↗
5. Long-term oxidation behavior and mechanical strength degradation of a pressurelessly sintered ZrB2–MoSi2 ceramic10.1016/j.scriptamat.2005.07.026 ↗
6. Sintering behaviour of self-propagating high temperature synthesised ZrB2–Al2O3 composite powder10.1016/j.msea.2006.04.026 ↗
7. Elastic properties of spark plasma sintered (SPSed) ZrB2–ZrC–SiC composites10.1016/j.ceramint.2007.06.010 ↗
8. Oxidation behavior and mechanical properties degradation of hot-pressed Al2O3/ZrB2/ZrO2 ceramic composites10.1016/j.ijrmhm.2008.12.006 ↗
9. Effect of a SiC whisker formation on the densification of Tyranno SA/SiC composites fabricated by the CVI process10.1016/j.fusengdes.2005.07.013 ↗
10. Fabrication of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze casting10.1016/j.jmatprotec.2006.03.125 ↗
11. Pressureless sintering of internally synthesized SiC–TiB2 composites with improved fracture strength10.1016/j.jallcom.2010.09.152 ↗
12. In-situ HIP synthesis of TiB2/SiC ceramic composites10.1016/S0924-0136(99)00137-5 ↗
13. In situ platelet-toughened TiB2–SiC composites prepared by reactive pulsed electric current sintering10.1016/j.scriptamat.2011.03.015 ↗
14. Large-scale fine structural alumina matrix ceramic guideway materials improved by diopside and Fe2O310.1016/j.ceramint.2006.09.014 ↗
15. Self-lubrication of Al2O3/TiC/CaF2 ceramic composites in sliding wear tests and in machining processes10.1016/j.matdes.2005.12.003 ↗
16. Mechanochemical synthesis and SHS of diborides of titanium and zirconium10.1023/A:1013245413840 ↗
17. A model for the oxidation of ZrB2, HfB2 and TiB210.1016/j.actamat.2007.07.027 ↗
18. Processing and properties of zirconium diboride-based composites10.1016/S0955-2219(01)00284-9 ↗
19. Mechanical properties and in-situ toughening mechanism of pressurelessly densified ZrB2–TiB2 ceramic composites10.1016/j.msea.2012.12.012 ↗