Development of TiCN-based cermets: Mechanical properties and wear mechanism
Source abstract
Abstract
Abstract In order to improve the performances of TiCN-based cermets, researchers have paid much attention directly towards developing various new spices of cermets. The present review will try to sum up the efforts in designing and tailing in compositions and microstructures of TiCN-based cermets in recent years aiming at enhanced cermet properties. The relationship between the cermet constituents and their mechanical properties and wear resistance, as well as the advances in the synthesis of TiCN powders and preparation of TiCN-based cermets were included. Special emphasis was paid on the preparation of ultrafine/nano TiCN-based cermets possessing enhanced hardness, mechanical strength, toughness and wear resistance, which has led to a very recent surge of interest in the development of TiCN-based cermets. In particular, it has been possible to obtain dense TiCN-based cermets with ultrafine- and/or nano-structures by means of fast sintering techniques, such as spark plasma sintering, microwave vacuum sintering and so on.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Ceramic cutting tools: an introduction10.4028/www.scientific.net/KEM.96.1 ↗
2. Titanium carbonitride-based cermets: processes and properties10.1016/0921-5093(93)90588-6 ↗
3. Present status and development of tool materials: part 1. Cutting tools
4. TiCN cermets metallurgy and properties10.1016/0263-4368(95)00027-G ↗
5. Toughened ultrafine (Ti,W)(C,N)-Ni cermet10.1016/j.scriptamat.2004.09.017 ↗
6. Ultrafine (Ti,M)(C,N)-based cermets with optimal mechanical properties10.1016/j.ijrmhm.2010.08.007 ↗
7. Preparation of ultrafine TiC0.7N0.3-based cermet10.1016/j.ijrmhm.2007.05.001 ↗
8. Cutting performances, mechanical property and microstructure of ultrafine grade TiCN-based cermets10.1016/j.ijrmhm.2005.09.001 ↗
9. Microstructures and mechanical properties of nano TiN modified TiC-based cermets for the milling tools10.1016/j.msea.2004.04.053 ↗
10. Challenges and advances in nanocomposite processing techniques10.1016/j.mser.2006.11.002 ↗
11. Self-sustaining metal-sulfur reactions induced by ball milling10.1023/A:1011360009447 ↗
12. Monophasic TiyNb1−yCxN1−x nanopowders obtained at room temperature by MSR10.1039/B613566H ↗
13. Preparation and properties of ultrafine TiCN matrix cermets by vacuum microwave sintering10.1007/s12598-010-0162-8 ↗
14. Effect of CNTs addition on microstructure and mechanical properties of Ti(C,N)-based cermets
15. Study on the SiC whisker toughening Ti(C,N)-based cermet composites
16. Mechanical properties and microstructure of TiCN-based cermets reinforced by nano-Si3N4 particles10.1016/j.ijrmhm.2010.09.010 ↗
17. Study of TiCN nano powder reinforced Ti(C,N)-based cermets
18. Mechanical alloying of a TiC–TiN ceramic system10.1016/S0924-0136(96)02828-2 ↗
19. Synthesis of ultrafine (Ti, W, Mo, V)(C, N)-Ni composite powders by low-energy milling and subsequent carbothermal reduction-nitridation reaction10.1016/j.jallcom.2009.07.088 ↗
20. Spark plasma sintering properties of ultrafine Ti(C,N)-based Cermet10.1007/BF02838368 ↗
21. Study on preparation and microwave sintering process of ultrafine TiCN matrix cermet
22. Direct formation of titanium carbonitrides by SHS in nitrogen10.1016/j.ceramint.2004.07.013 ↗
23. Characterization of phase transformation and microstructure of nano hard phase Ti(C,N)-based cermet by spark plasma sintering
24. Fried Krupp AG. French Patent 715148; 1931.
25. The story of cermets
26. Nickel in hard metals10.1016/0263-4368(92)90056-8 ↗
27. Mechanical properties and microstructure of submicron cermets10.1016/0263-4368(95)92677-C ↗
28. Effect of carbon content on the microstructure and mechanical properties of (Ti,W,Ta,Mo)(C,N)-(Co,Ni) cermets10.1016/S0263-4368(98)00074-2 ↗
29. Tobioka M, Shimizu Y, Isobe K, Kitagawa N, Nomura T, Takahashi K. US Patent 4769070; 1988.
30. Addition of carbon contents on the microstructure and mechanical properties of cermets with high content of nickel
31. Effects of addition of carbon elements on the microstructure and mechanical properties of TiCN-based cermets
32. Influence of carbon contents on structure and properties of TiCN-based cermets
33. Formation of core/rim structures in TiCN–WC–Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
34. Development of cermet microstructures during sintering10.1007/s11661-001-0104-z ↗
35. Microstructure and mechanical properties of TiC–TiN based cermets for tools application10.1016/j.ijrmhm.2008.10.006 ↗
36. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets10.1016/j.ijrmhm.2005.05.008 ↗
37. Review on the preparation and application of Ti(C,N)-based cermet composite
38. Manufacture and application of TiCN matrix cermet
39. Wear properties of nano TiN modified cermets cutters
40. Progress in research on cermets
41. Research progress of TiCN cermets with nano modification
42. Corrosion resistance of Ti(C,N)-based cermet for surgical cutting tools
43. TiCN-high speed steel composites: sinter ability and properties10.1016/S1359-835X(02)00024-6 ↗
44. Effect of ultra-fine TiC0.5N0.5 on the microstructure and properties of gradient cemented carbide10.1016/j.jmatprotec.2009.03.018 ↗
45. Gas pressure sintering of Al2O3/TiCN composite10.1016/j.ceramint.2004.11.007 ↗
46. Structure refinement of titanium carbonitride (TiCN)10.1016/S0167-577X(97)00276-0 ↗
47. Effect of substrate bias on sputter-deposited TiCx, TiNy and TiCxNy thin films10.1016/0257-8972(95)02594-4 ↗
48. Growth, microstructure and mechanical properties of arc evaporated TiCxN1-x(0≤x≤1) films10.1016/S0257-8972(00)00518-1 ↗
49. Ruisong · 2002
50. Effect of carbides on the microstructure and properties of TiCN-based ceramics10.1111/j.1151-2916.1999.tb02216.x ↗
51. Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti,W,Mo,V)(C,N)-based cermet10.1016/j.ijrmhm.2011.03.013 ↗
52. Constituent phase nanoindentation of WC/Co and TiCN hard metals10.1016/0921-5093(95)10099-7 ↗
53. Matallurgy reaction foundation and microstructural characterization of TiCN-based cermets Part II: mechanism of formation of core-rim structure and gas evolution during sintering
54. The influence of TiN content on properties of Ti(C,N) solid solution10.1016/0921-5093(95)10135-7 ↗
55. Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction10.1016/j.ijrmhm.2011.09.003 ↗
56. Microstructure and properties of TiCN-Mo2C-Fe cermets10.1016/j.ijrmhm.2009.01.003 ↗
57. Properties of titanium carbonitride matrix cermets10.1016/j.ijrmhm.2005.05.009 ↗
58. Effect of carbon content and cooling mode on the microstructure and properties of TiCN-based cermets10.1016/j.ijrmhm.2009.07.018 ↗
59. Current status of research on additives in TiCN-based cermet
60. Status of research on composition and properties of TiCN-based cermets
61. The influence of the adding content of TiN on the composition microstructure and properties of TiCN-based cermet
62. Interface behavior of carbides in Ti(C,N)-based cermet
63. Thermal shock resistance of Ti(C,N)-based cermets modified by nano TiN powders
64. Microstructure of the Ni binder phase in a TiC–Mo2C–Ni cermet10.1016/S0968-4328(00)00077-9 ↗
65. Effect of Ni–Co on the properties of ultrafine grade TiCN-based cermets
66. Influence of WC content on microstructure and mechanical properties of ultrafine TiCN-based cermet
67. Study of TiCN-based metal ceramic
68. The role of molybdenum in the hard-phase grains of (Ti,Mo)(C,N)-Co cermets10.1080/14786430310001659516 ↗
69. Effect of chemical composition on the fracture toughness of TiCN-based cermets
70. Effect of molybdenum content on the microstructure and mechanical properties of ultrafine Ti(C,N)-based cermets10.1016/j.matchar.2008.03.008 ↗
71. Effect of rare metal Er on the microstructure and mechanical properties of TiCN-based cermets
72. Effect of RE element Y on properties of TiCN-based cermet
73. Metallurgical reaction foundation and microstructural characterization of Ti(C,N)-based cermets Part I: metallurgical reaction foundation during sintering
74. The effect of WC, Mo2C, TaC content on the microstructure and properties of ultra-fine TiC0.7N0.3 cerme10.1016/j.matdes.2006.03.005 ↗
75. Effect of WC on the microstructure and mechanical properties in the Ti(C0.7N0.3)x-WC–Mo2C–(Co,Ni) system10.1016/j.ijrmhm.2008.01.010 ↗
76. Effects of WC particle sizes on microstructure and mechanical properties of TiCN-based cermet
77. Influence of WC Content on microstructure and mechanical properties of ultrafine TiCN-based cermet
78. Effect of Mo and Mo2C on the microstructure and properties of the cermets based on TiCN10.1016/S1006-7191(08)60041-1 ↗
79. Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti,W,Mo,V)(C,N)-based cermets10.1016/j.ijrmhm.2011.03.013 ↗
80. Effect of NbC on the microstructure and sinterability of Ti(C0.7,N0.3)-based cermets10.1016/j.ijrmhm.2008.07.003 ↗
81. Effects of Cr3C2 addition on the corrosion behavior of Ti(C,N)-based cermets10.1016/j.ijrmhm.2011.10.013 ↗
82. Effect of VC on microstructure and property of nano Ti(C,N)-based cermet
83. Effect of WC and group IV carbides on the cutting performance of Ti(C,N) cermet tools10.1016/j.ijmachtools.2003.10.023 ↗
84. Model for fretting wear of brittle ceramics10.1016/j.actamat.2009.01.013 ↗
85. Mechanisms of material removal during high temperature fretting of TiCN-Ni based cermets10.1016/j.ijrmhm.2007.12.006 ↗
86. Fretting wear properties of TiCN–Ni cermets: influence of load and secondary carbide addition10.1007/s11661-007-9446-5 ↗
87. Fretting wear of TiCN-Ni cermet: influence of secondary carbide content
88. Tribological properties of TiCN–Ni cermets: influence of NbC addition
89. Load-dependent transition in sliding wear properties of TiCN-WC-Ni Cermets10.1111/j.1551-2916.2007.01630.x ↗
90. Crater wear mechanisms of TiCN–Ni–WC cermets during dry machining10.1016/j.ijrmhm.2006.12.001 ↗
91. Tribological behavior of TiCN-based cermets at elevated temperatures10.1016/j.msea.2005.11.022 ↗
92. Wear models and predictive equations: their form and content10.1016/0043-1648(95)90158-2 ↗
93. Some reflections on the past and future of erosion10.1016/0043-1648(95)07188-1 ↗
94. The erosion of four materials using seven erodents: towards an understanding
95. A study of cermets' wear behavior10.1016/S0043-1648(96)07397-8 ↗
96. Hutchings · 2001
97. Behavior of TiC-based cermets in different wear conditions10.1016/S0043-1648(01)00569-5 ↗
98. Some aspects of solid particle erosion of cermets10.1016/S0301-679X(00)00140-7 ↗
99. Erosion of ceramics and cermets10.1016/S0924-0136(01)00986-4 ↗
100. Erosion wear behavior of TiCN-Ni cermets containing secondary carbides (WC/NbC/TaC)10.1111/j.1551-2916.2006.01277.x ↗